unit4.pas

人寿保险的管理信息系统

unit Unit4;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, StdCtrls, Buttons, Grids, DBGrids, ExtCtrls, ComCtrls, Mask;

type
  Tf_customer = class(TForm)
    Panel1: TPanel;
    Panel2: TPanel;
    SpeedButton1: TSpeedButton;
    SpeedButton2: TSpeedButton;
    SpeedButton3: TSpeedButton;
    Edit1: TEdit;
    Label1: TLabel;
    Label2: TLabel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    Label8: TLabel;
    Label9: TLabel;
    Edit3: TEdit;
    ComboBox1: TComboBox;
    Edit4: TEdit;
    Edit5: TEdit;
    ComboBox2: TComboBox;
    DateTimePicker1: TDateTimePicker;
    Edit6: TEdit;
    Button1: TButton;
    Edit7: TEdit;
    Label10: TLabel;
    Edit2: TEdit;
    SpeedButton5: TSpeedButton;
    Splitter1: TSplitter;
    Button4: TButton;
    Panel6: TPanel;
    SpeedButton4: TSpeedButton;
    SpeedButton6: TSpeedButton;
    Label11: TLabel;
    DateTimePicker2: TDateTimePicker;
    Label12: TLabel;
    Edit8: TEdit;
    Label13: TLabel;
    Edit9: TEdit;
    Label14: TLabel;
    Edit10: TEdit;
    DBGrid1: TDBGrid;
    Panel3: TPanel;
    Splitter2: TSplitter;
    Label15: TLabel;
    Edit11: TEdit;
    Button2: TButton;
    Label16: TLabel;
    Edit12: TEdit;
    Button3: TButton;
    procedure SpeedButton1Click(Sender: TObject);
    procedure Button1Click(Sender: TObject);
    procedure Button2Click(Sender: TObject);
    procedure Button3Click(Sender: TObject);
    procedure SpeedButton2Click(Sender: TObject);
    procedure SpeedButton3Click(Sender: TObject);

    procedure Button4Click(Sender: TObject);
    procedure SpeedButton5Click(Sender: TObject);
    procedure SpeedButton6Click(Sender: TObject);
    procedure FormShow(Sender: TObject);

    procedure Edit2KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit3KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure ComboBox1KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit4KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit5KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure ComboBox2KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit6KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit7KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit1KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure DateTimePicker1KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit3KeyPress(Sender: TObject; var Key: Char);
    procedure Edit6KeyPress(Sender: TObject; var Key: Char);
    procedure Edit7KeyPress(Sender: TObject; var Key: Char);
    procedure Edit8KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit9KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit10KeyDown(Sender: TObject; var Key: Word;
      Shift: TShiftState);
    procedure Edit11Change(Sender: TObject);
    procedure Edit12Change(Sender: TObject);


  private
    { Private declarations }
  public

    punum:string;//编号
    { Public declarations }
  end;

var
  f_customer: Tf_customer;
  change:boolean; //数据是否变动

implementation
  uses unit11, Unit5,  Unit6, Unit8, Unit7;
{$R *.dfm}

procedure Tf_customer.SpeedButton1Click(Sender: TObject);
var
  datefen:string;
begin

  Edit2.Enabled:=True;
  Edit3.Enabled:=True;
  Edit4.Enabled:=True;
  Edit5.Enabled:=True;
  Datetimepicker1.Enabled:=True;
  datetimepicker2.Enabled:=true;
  Edit6.Enabled:=True;
  Edit7.Enabled:=True;
  edit8.Enabled:=true;
  edit9.Enabled:=true;
  edit10.Enabled:=true;
  Combobox1.Enabled:=True;
  Combobox2.Enabled:=True;
  Button1.Enabled:=True;
  Button4.Enabled:=True;
  Speedbutton1.Enabled:=False;
  Speedbutton2.Enabled:=False;
  Speedbutton3.Enabled:=False;

  Datefen:='';
  Punum:='';
  datefen:=Formatdatetime('yyyymmdd',now());//格式化的年月日
  mydm.cust1src.DataSet.Last;
  if Trim(mydm.cust1src.DataSet.Fields[0].AsString)<>'' then
    Punum:=inttostr(strtoint(copy(Trim(mydm.cust1src.DataSet.Fields[0].AsString),9,2))+1);//Punum定义的字符串型全局变量
  if (1<=length(punum)) and (length(punum)<2) then
    punum:='0'+punum;
  if length(punum)<1 then
    punum:='01';
  if length(punum)=3 then
    punum:='01';
  Edit1.Text:=datefen+punum;//日期+两位编号

  Edit2.Clear;
  Edit3.Clear;
  Edit4.Clear;
  Edit5.Clear;
  edit6.Clear;
  edit7.Clear;
  edit8.clear;
  edit9.Clear;
  edit10.Clear;
  Datetimepicker1.Date;
  Datetimepicker2.Date;
  if Edit2.Enabled=True then
    Edit2.SetFocus;
 end;

procedure Tf_customer.Button1Click(Sender: TObject);
begin

  if ((Edit1.text<>'') and (Edit2.Text<>'') and (Edit3.Text<>'') and (edit4.Text<>'')
       and (edit5.text<>'')and (edit6.Text<>'')and (edit7.text<>'')) then
  begin
    if Change=true then
       if (length(edit3.Text)>22) or (length(edit3.Text)<12) then
         begin
         Application.MessageBox('请输入有效的身份证号','提示',64);
         exit;
         edit3.Clear;
         edit3.SetFocus;
         end
      else
    begin

      mydm.cust1src.DataSet.Delete;
    end;
    with mydm.cust1query do
    begin
      Close;
      with SQL do
      begin
        Clear;
        Add('insert into customer values(:p0,:p1,:p2,:p3,:p4,:p5,:p6,:p7,:p8,:p9,:p10,:p11,:p12,:p13)');
      end;
      Parameters[0].Value:=Trim(edit1.Text);
      Parameters[1].Value:=Trim(combobox1.Text);
      Parameters[2].Value:=Trim(edit4.Text);
      Parameters[3].value:=Trim(edit5.Text);
      Parameters[4].Value:=datetimepicker1.Date;
      Parameters[5].Value:=Trim(combobox2.Text);
      parameters[6].Value:=Trim(edit2.Text);
      Parameters[7].Value:=Trim(edit3.Text);
      Parameters[8].Value:=Trim(edit6.Text);
      Parameters[9].Value:=Trim(edit7.Text);
      Parameters[10].Value:=Trim(edit9.Text);
      Parameters[11].Value:=Trim(edit10.Text);
      Parameters[12].Value:=Trim(edit8.Text);
      Parameters[13].Value:=datetimepicker2.Date;
      Execsql;
    end;
    with mydm.cust1query do
    begin
      Close;
      with SQL do
      begin
        Clear;
        Add('select*from customer');
      end;
      Open;
        Change:=false;
      button4.Click;
    end;
  end
  else
  begin
    Application.MessageBox('输入必要信息。','提示',64);
    exit;
  end;
  Button1.Enabled:=false;
  button4.Enabled:=false;
  Speedbutton1.Enabled:=false;
  Speedbutton2.Enabled:=true;
  Speedbutton3.Enabled:=true;
  Speedbutton5.Enabled:=true;
  edit1.Clear;
  edit2.clear;
  edit3.clear;
  edit4.Clear;
  edit5.clear;
  datetimepicker1.Date;
  edit6.Clear;
  edit7.clear;
  edit8.Clear;
  edit9.Clear;
  edit10.Clear;
  datetimepicker2.Date;
  speedbutton6.Enabled:=True;
end;

procedure Tf_customer.Button2Click(Sender: TObject);
begin
  with mydm.cust1query do
  begin
    Close;
    with SQL do
    begin
      Clear;
      Add('select*from customer where cust_id=:p0');
    end;
    Parameters[0].Value:=Trim(Edit11.Text);//Trim()为去空格函数
    Prepared;
    Open;
    //Button2.Enabled:=False;
  end;
end;

procedure Tf_customer.Button3Click(Sender: TObject);
begin
  with mydm.cust1query do
  begin
    Close;
      with SQL do
      begin
        Clear;
        Add('select*from customer');
        Add('where cust_name=:p');
      end;
    Parameters[0].Value:=trim(edit12.Text);
    Prepared;
    Open;
    //Button3.Enabled:=false;
  end;
end;

procedure Tf_customer.SpeedButton2Click(Sender: TObject);
begin
  if mydm.cust1query.RecordCount=0 then
    Exit;
  Edit1.Clear;
  Edit2.Clear;
  Edit3.Clear;
  Edit4.Clear;
  edit5.Clear;
  edit6.Clear;
  edit7.Clear;
  edit8.Clear;
  edit9.Clear;
  edit10.Clear;
  button1.Enabled:=true;
  button4.Enabled:=true;
  change:=true;
  Button1.Enabled:=true;
  Speedbutton1.Enabled:=false;
  Speedbutton2.Enabled:=false;
  Speedbutton3.Enabled:=false;
  //Speedbutton5.Enabled:=false;
  Edit2.Enabled:=true;
  Edit3.Enabled:=true;
  Edit4.Enabled:=true;
  Edit5.Enabled:=true;
  Datetimepicker1.Enabled:=true;
  Edit6.Enabled:=true;
  Edit7.Enabled:=true;
  edit8.Enabled:=true;
  edit9.Enabled:=true;
  edit10.Enabled:=true;
  Combobox1.Enabled:=true;
  Combobox2.Enabled:=true;
  datetimepicker2.Enabled:=true;

  Edit1.Text:=mydm.cust1src.DataSet.Fields[0].AsString;
  Edit2.Text:=mydm.cust1src.DataSet.Fields[6].AsString;
  Edit3.Text:=mydm.cust1src.DataSet.Fields[7].AsString;
  Combobox1.Text:=mydm.cust1src.DataSet.Fields[1].AsString;
  Edit4.Text:=mydm.cust1src.DataSet.Fields[2].asstring;
  Edit5.Text:=mydm.cust1src.DataSet.Fields[3].asstring;
  Datetimepicker1.Date:=mydm.cust1src.DataSet.Fields[4].AsDateTime;
  Combobox2.Text:=mydm.cust1src.DataSet.Fields[5].AsString;
  Edit6.Text:=mydm.cust1src.DataSet.Fields[8].AsString;
  Edit7.Text:=mydm.cust1src.DataSet.Fields[9].AsString;
  edit8.Text:=mydm.cust1src.DataSet.Fields[12].AsString;
  edit9.Text:=mydm.cust1src.DataSet.Fields[10].AsString;
  edit10.Text:=mydm.cust1src.DataSet.Fields[11].AsString;
  datetimepicker2.Date:=mydm.cust1src.DataSet.Fields[13].AsDateTime;
end;

procedure Tf_customer.SpeedButton3Click(Sender: TObject);
begin
 if Application.MessageBox('是否删除？','提示',mb_yesno)=6 then
  begin
    try
      mydm.cust1src.DataSet.Delete;
    except//如果删除不成功将弹出以下对会框
      Application.MessageBox('删除不成功!','提示',mb_ok);
    end;
  end;

end;





procedure Tf_customer.Button4Click(Sender: TObject);
begin
  edit1.Clear;
  edit2.clear;
  edit3.clear;
  edit4.Clear;
  edit5.clear;
  datetimepicker1.Date;
  edit6.Clear;
  edit7.clear;
  edit8.Clear;
  edit9.Clear;
  edit10.Clear;

  edit1.Enabled:=false;
  edit2.Enabled:=false;
  edit3.Enabled:=false;
  edit4.Enabled:=false;
  edit5.Enabled:=false;
  datetimepicker1.Enabled:=false;
  datetimepicker2.Enabled:=false;
  edit6.Enabled:=false;
  edit7.Enabled:=false;
  edit8.Enabled:=false;
  edit9.Enabled:=false;
  edit10.Enabled:=false;
  combobox1.Enabled:=false;
  combobox2.Enabled:=false;
  button1.Enabled:=false;
  button4.Enabled:=false;
  speedbutton1.Enabled:=true;
  speedbutton2.Enabled:=true;
  speedbutton3.Enabled:=true;
  speedbutton5.Enabled:=true;
  punum:='0';
  change:=False;
end;

procedure Tf_customer.SpeedButton5Click(Sender: TObject);
begin
  button4.Click;
  close;
end;

procedure Tf_customer.SpeedButton6Click(Sender: TObject);
begin
  if (button1.Enabled=true)  then
    application.MessageBox('请提交或取消！','提示',mb_ok)
  else

    close;
    hide;
    f_insurant.Show;

end;

procedure Tf_customer.FormShow(Sender: TObject);
begin
  speedbutton4.Enabled:=False;
  speedbutton6.Enabled:=False;
    button1.Enabled:=false;
    button4.Enabled:=false;
    button2.Enabled:=false;
    button3.Enabled:=false;
    speedbutton1.Enabled:=true;
    speedbutton2.Enabled:=true;
    speedbutton3.Enabled:=true;
    speedbutton5.Enabled:=true;

  if edit2.Enabled=true then
    edit2.SetFocus;
  with mydm.cust1query do
  begin
    close;
    with sql do
    begin
      clear;
      add('select*from customer');
    end;
    open;
  end;
end;


procedure Tf_customer.Edit2KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit3KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);

end;

procedure Tf_customer.ComboBox1KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit4KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit5KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.ComboBox2KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit6KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);

end;

procedure Tf_customer.Edit7KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit1KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.DateTimePicker1KeyDown(Sender: TObject;
  var Key: Word; Shift: TShiftState);
begin
  if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit3KeyPress(Sender: TObject; var Key: Char);
begin
  if not (key in['0'..'9',#8]) then key:=#0;
end;

procedure Tf_customer.Edit6KeyPress(Sender: TObject; var Key: Char);
begin
  if not (key in ['0'..'9','-',#8]) then
    key:=#0;
end;

procedure Tf_customer.Edit7KeyPress(Sender: TObject; var Key: Char);
begin
  if not (key in ['0'..'9','-',#8]) then
    key:=#0;
end;



procedure Tf_customer.Edit8KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
    if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit9KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
      if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit10KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
    if Key=13 then
    selectnext(sender as twincontrol,true,true);
end;

procedure Tf_customer.Edit11Change(Sender: TObject);
begin
    button2.Enabled:=true;
    
end;

procedure Tf_customer.Edit12Change(Sender: TObject);
begin
    button3.Enabled:=true;
end;

end.