call.lisp

开源跨平台Lisp编译器

                      (store-stack-tn (cdr def) null-tn)))
                  (inst b defaulting-done)
                  (trace-table-entry trace-table-normal))))))

        (inst compute-code-from-lra code-tn code-tn lra-label temp)))
  (values))


;;;; Unknown values receiving:

;;;    Emit code needed at the return point for an unknown-values call for an
;;; arbitrary number of values.
;;;
;;;    We do the single and non-single cases with no shared code: there doesn't
;;; seem to be any potential overlap, and receiving a single value is more
;;; important efficiency-wise.
;;;
;;;    When there is a single value, we just push it on the stack, returning
;;; the old SP and 1.
;;;
;;;    When there is a variable number of values, we move all of the argument
;;; registers onto the stack, and return Args and Nargs.
;;;
;;;    Args and Nargs are TNs wired to the named locations.  We must
;;; explicitly allocate these TNs, since their lifetimes overlap with the
;;; results Start and Count (also, it's nice to be able to target them).
(defun receive-unknown-values (args nargs start count lra-label temp)
  (declare (type tn args nargs start count temp))
  (let ((variable-values (gen-label))
        (done (gen-label)))
    (sb!assem:without-scheduling ()
      (inst b variable-values)
      (inst nop))

    (inst compute-code-from-lra code-tn code-tn lra-label temp)
    (inst addi csp-tn csp-tn 4)
    (storew (first *register-arg-tns*) csp-tn -1)
    (inst subi start csp-tn 4)
    (inst li count (fixnumize 1))

    (emit-label done)

    (assemble (*elsewhere*)
      (trace-table-entry trace-table-fun-prologue)
      (emit-label variable-values)
      (inst compute-code-from-lra code-tn code-tn lra-label temp)
      (do ((arg *register-arg-tns* (rest arg))
           (i 0 (1+ i)))
          ((null arg))
        (storew (first arg) args i))
      (move start args)
      (move count nargs)
      (inst b done)
      (trace-table-entry trace-table-normal)))
  (values))


;;; VOP that can be inherited by unknown values receivers.  The main
;;; thing this handles is allocation of the result temporaries.
(define-vop (unknown-values-receiver)
  (:results
   (start :scs (any-reg))
   (count :scs (any-reg)))
  (:temporary (:sc descriptor-reg :offset ocfp-offset
                   :from :eval :to (:result 0))
              values-start)
  (:temporary (:sc any-reg :offset nargs-offset
               :from :eval :to (:result 1))
              nvals)
  (:temporary (:scs (non-descriptor-reg)) temp))



;;;; Local call with unknown values convention return:

;;; Non-TR local call for a fixed number of values passed according to the
;;; unknown values convention.
;;;
;;; Args are the argument passing locations, which are specified only to
;;; terminate their lifetimes in the caller.
;;;
;;; Values are the return value locations (wired to the standard passing
;;; locations).
;;;
;;; Save is the save info, which we can ignore since saving has been done.
;;; Return-PC is the TN that the return PC should be passed in.
;;; Target is a continuation pointing to the start of the called function.
;;; Nvals is the number of values received.
;;;
;;; Note: we can't use normal load-tn allocation for the fixed args, since all
;;; registers may be tied up by the more operand.  Instead, we use
;;; MAYBE-LOAD-STACK-TN.
(define-vop (call-local)
  (:args (fp)
         (nfp)
         (args :more t))
  (:results (values :more t))
  (:save-p t)
  (:move-args :local-call)
  (:info arg-locs callee target nvals)
  (:vop-var vop)
  (:temporary (:scs (descriptor-reg) :from (:eval 0)) move-temp)
  (:temporary (:scs (non-descriptor-reg)) temp)
  (:temporary (:sc control-stack :offset nfp-save-offset) nfp-save)
  (:temporary (:sc any-reg :offset ocfp-offset :from (:eval 0)) ocfp)
  (:ignore arg-locs args ocfp)
  (:generator 5
    (trace-table-entry trace-table-call-site)
    (let ((label (gen-label))
          (cur-nfp (current-nfp-tn vop)))
      (when cur-nfp
        (store-stack-tn nfp-save cur-nfp))
      (let ((callee-nfp (callee-nfp-tn callee)))
        (when callee-nfp
          (maybe-load-stack-tn callee-nfp nfp)))
      (maybe-load-stack-tn cfp-tn fp)
      (inst compute-lra-from-code
            (callee-return-pc-tn callee) code-tn label temp)
      (note-this-location vop :call-site)
      (inst b target)
      (emit-return-pc label)
      (default-unknown-values vop values nvals move-temp temp label)
      ;; alpha uses (maybe-load-stack-nfp-tn cur-nfp nfp-save temp)
      ;; instead of the clause below
      (when cur-nfp
        (load-stack-tn cur-nfp nfp-save)))
    (trace-table-entry trace-table-normal)))


;;; Non-TR local call for a variable number of return values passed according
;;; to the unknown values convention.  The results are the start of the values
;;; glob and the number of values received.
;;;
;;; Note: we can't use normal load-tn allocation for the fixed args, since all
;;; registers may be tied up by the more operand.  Instead, we use
;;; MAYBE-LOAD-STACK-TN.
(define-vop (multiple-call-local unknown-values-receiver)
  (:args (fp)
         (nfp)
         (args :more t))
  (:save-p t)
  (:move-args :local-call)
  (:info save callee target)
  (:ignore args save)
  (:vop-var vop)
  (:temporary (:sc control-stack :offset nfp-save-offset) nfp-save)
  (:temporary (:scs (non-descriptor-reg)) temp)
  (:generator 20
    (trace-table-entry trace-table-call-site)
    (let ((label (gen-label))
          (cur-nfp (current-nfp-tn vop)))
      (when cur-nfp
        (store-stack-tn nfp-save cur-nfp))
      (let ((callee-nfp (callee-nfp-tn callee)))
        ;; alpha doesn't test this before the maybe-load
        (when callee-nfp
          (maybe-load-stack-tn callee-nfp nfp)))
      (maybe-load-stack-tn cfp-tn fp)
      (inst compute-lra-from-code
            (callee-return-pc-tn callee) code-tn label temp)
      (note-this-location vop :call-site)
      (inst b target)
      (emit-return-pc label)
      (note-this-location vop :unknown-return)
      (receive-unknown-values values-start nvals start count label temp)
      (when cur-nfp
        (load-stack-tn cur-nfp nfp-save)))
    (trace-table-entry trace-table-normal)))


;;;; Local call with known values return:

;;; Non-TR local call with known return locations.  Known-value return works
;;; just like argument passing in local call.
;;;
;;; Note: we can't use normal load-tn allocation for the fixed args, since all
;;; registers may be tied up by the more operand.  Instead, we use
;;; MAYBE-LOAD-STACK-TN.
(define-vop (known-call-local)
  (:args (fp)
         (nfp)
         (args :more t))
  (:results (res :more t))
  (:move-args :local-call)
  (:save-p t)
  (:info save callee target)
  (:ignore args res save)
  (:vop-var vop)
  (:temporary (:sc control-stack :offset nfp-save-offset) nfp-save)
  (:temporary (:scs (non-descriptor-reg)) temp)
  (:generator 5
    (trace-table-entry trace-table-call-site)
    (let ((label (gen-label))
          (cur-nfp (current-nfp-tn vop)))
      (when cur-nfp
        (store-stack-tn nfp-save cur-nfp))
      (let ((callee-nfp (callee-nfp-tn callee)))
        (when callee-nfp
          (maybe-load-stack-tn callee-nfp nfp)))
      (maybe-load-stack-tn cfp-tn fp)
      (inst compute-lra-from-code
            (callee-return-pc-tn callee) code-tn label temp)
      (note-this-location vop :call-site)
      (inst b target)
      (emit-return-pc label)
      (note-this-location vop :known-return)
      (when cur-nfp
        (load-stack-tn cur-nfp nfp-save)))
    (trace-table-entry trace-table-normal)))

;;; Return from known values call.  We receive the return locations as
;;; arguments to terminate their lifetimes in the returning function.  We
;;; restore FP and CSP and jump to the Return-PC.
;;;
;;; Note: we can't use normal load-tn allocation for the fixed args, since all
;;; registers may be tied up by the more operand.  Instead, we use
;;; MAYBE-LOAD-STACK-TN.
(define-vop (known-return)
  (:args (old-fp :target old-fp-temp)
         (return-pc :target return-pc-temp)
         (vals :more t))
  (:temporary (:sc any-reg :from (:argument 0)) old-fp-temp)
  (:temporary (:sc descriptor-reg :from (:argument 1)) return-pc-temp)
  (:move-args :known-return)
  (:info val-locs)
  (:ignore val-locs vals)
  (:vop-var vop)
  (:generator 6
    (trace-table-entry trace-table-fun-epilogue)
    (maybe-load-stack-tn old-fp-temp old-fp)
    (maybe-load-stack-tn return-pc-temp return-pc)
    (move csp-tn cfp-tn)
    (let ((cur-nfp (current-nfp-tn vop)))
      (when cur-nfp
        (inst addi nsp-tn cur-nfp
              (- (bytes-needed-for-non-descriptor-stack-frame)
                 number-stack-displacement))))
    (move cfp-tn old-fp-temp)
    (inst j return-pc-temp (- n-word-bytes other-pointer-lowtag))
    (trace-table-entry trace-table-normal)))


;;;; Full call:
;;;
;;;    There is something of a cross-product effect with full calls.  Different
;;; versions are used depending on whether we know the number of arguments or
;;; the name of the called function, and whether we want fixed values, unknown
;;; values, or a tail call.
;;;
;;; In full call, the arguments are passed creating a partial frame on the
;;; stack top and storing stack arguments into that frame.  On entry to the
;;; callee, this partial frame is pointed to by FP.  If there are no stack
;;; arguments, we don't bother allocating a partial frame, and instead set FP
;;; to SP just before the call.

;;;    This macro helps in the definition of full call VOPs by avoiding code
;;; replication in defining the cross-product VOPs.
;;;
;;; NAME is the name of the VOP to define.
;;;
;;; NAMED is true if the first argument is a symbol whose global function
;;; definition is to be called.
;;;
;;; RETURN is either :FIXED, :UNKNOWN or :TAIL:
;;; -- If :FIXED, then the call is for a fixed number of values, returned in
;;;    the standard passing locations (passed as result operands).
;;; -- If :UNKNOWN, then the result values are pushed on the stack, and the
;;;    result values are specified by the Start and Count as in the
;;;    unknown-values continuation representation.
;;; -- If :TAIL, then do a tail-recursive call.  No values are returned.
;;;    The Old-Fp and Return-PC are passed as the second and third arguments.
;;;
;;; In non-tail calls, the pointer to the stack arguments is passed as the last
;;; fixed argument.  If VARIABLE is false, then the passing locations are
;;; passed as a more arg.  VARIABLE is true if there are a variable number of
;;; arguments passed on the stack.  VARIABLE cannot be specified with :TAIL
;;; return.  TR variable argument call is implemented separately.
;;;
;;; In tail call with fixed arguments, the passing locations are passed as a
;;; more arg, but there is no new-FP, since the arguments have been set up in
;;; the current frame.
(defmacro define-full-call (name named return variable)
  (aver (not (and variable (eq return :tail))))
  `(define-vop (,name
                ,@(when (eq return :unknown)
                    '(unknown-values-receiver)))
     (:args
      ,@(unless (eq return :tail)
          '((new-fp :scs (any-reg) :to :eval)))

      ,(if named
           '(name :target name-pass)
           '(arg-fun :target lexenv))

      ,@(when (eq return :tail)
          '((old-fp :target old-fp-pass)
            (return-pc :target return-pc-pass)))

      ,@(unless variable '((args :more t :scs (descriptor-reg)))))

     ,@(when (eq return :fixed)
         '((:results (values :more t))))

     (:save-p ,(if (eq return :tail) :compute-only t))

     ,@(unless (or (eq return :tail) variable)
         '((:move-args :full-call)))

    (:vop-var vop)
    (:info ,@(unless (or variable (eq return :tail)) '(arg-locs))
           ,@(unless variable '(nargs))
           ,@(when (eq return :fixed) '(nvals))