makefile.in

www工具包. 这是W3C官方支持的www支撑库. 其中提供通用目的的客户端的WebAPI: complete HTTP/1.1 (with caching, pipelining, PUT, POS

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

webbot$(EXEEXT): $(webbot_OBJECTS) $(webbot_DEPENDENCIES)
	@rm -f webbot$(EXEEXT)
	$(LINK) $(webbot_LDFLAGS) $(webbot_OBJECTS) $(webbot_LDADD) $(LIBS)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = Robot/src

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done

info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am: install-binPROGRAMS
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS
uninstall: uninstall-recursive
all-am: Makefile $(PROGRAMS)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am:  mostlyclean-binPROGRAMS mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-binPROGRAMS clean-compile clean-libtool clean-tags \
		clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-binPROGRAMS distclean-compile distclean-libtool \
		distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean

.html.h:
    ifdef WWW
	$(WWW) -w90 -na -p -to text/x-c $(srcdir)/$(*F).html -o $(srcdir)/$(*F).h
    else
	@echo "**************************************************"
	@echo "Need to regenerate one or more .h files."
	@echo "Attempting to generate them using the"
	@echo "winConfigure.pl script - it may generate a few warnings."
	@echo "**************************************************"
	perl $(top_srcdir)/config/winConfigure.pl $(srcdir)
    endif

inc: $(BUILT_SOURCES)
	@echo Generated built sources

purify: $(webbot_OBJECTS) $(webbot_DEPENDENCIES)
	-rm purify; \
	purify -cache-dir=$(PURIFY_CACHE) \
	$(CC) $(LDFLAGS) -o purify $(webbot_OBJECTS) \
	-lm \
	../../Library/src/.libs/libwww.a \
	../../modules/md5/.libs/libmd5.a \
	../../modules/expat/xmlparse/.libs/libxmlparse.a \
	../../modules/expat/xmltok/.libs/libxmltok.a \
	$(LIBS)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: