1001.pci.patch

sm86xx内核源包括补丁（ GPL ）的

diff -Naur --exclude=CVS --exclude='*.o' --exclude='*.a' --exclude='*.so' --exclude='*.elf' --exclude=System.map --exclude=Makefile.d --exclude='*log' --exclude='*log2' --exclude='*~' --exclude='.*~' --exclude='.#*' --exclude='*.bak' --exclude='*.orig' --exclude='*.rej' --exclude='core.[0-9]*' --exclude=.depend --exclude='.*.o.flags' --exclude='*.gz' --exclude=.depend --exclude='.*.o.flags' --exclude='*.gz' --exclude=vmlinux --exclude=vmlinux.bin --exclude=yamon-02.06-SIGMADESIGNS-01_el.bin linux-2.6.15.ref/arch/mips/configs/tango2_defconfig linux-2.6.15/arch/mips/configs/tango2_defconfig
--- linux-2.6.15.ref/arch/mips/configs/tango2_defconfig	2007-06-20 12:06:10.000000000 -0700
+++ linux-2.6.15/arch/mips/configs/tango2_defconfig	2007-06-20 12:07:42.000000000 -0700
@@ -235,6 +235,9 @@
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -245,6 +248,7 @@
 #
 # PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -353,9 +357,14 @@
 #
 # Block devices
 #
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
@@ -383,6 +392,7 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
@@ -424,7 +434,38 @@
 # SCSI low-level drivers
 #
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -436,14 +477,19 @@
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
+# CONFIG_I2O is not set
 
 #
 # Network device support
@@ -455,6 +501,11 @@
 # CONFIG_TUN is not set
 
 #
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
 # PHY device support
 #
 # CONFIG_PHYLIB is not set
@@ -464,18 +515,45 @@
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -486,8 +564,11 @@
 # Wan interfaces
 #
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -533,6 +614,7 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -550,10 +632,12 @@
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -609,8 +693,9 @@
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -629,6 +714,7 @@
 #
 # InfiniBand support
 #
+# CONFIG_INFINIBAND is not set
 
 #
 # SN Devices
diff -Naur --exclude=CVS --exclude='*.o' --exclude='*.a' --exclude='*.so' --exclude='*.elf' --exclude=System.map --exclude=Makefile.d --exclude='*log' --exclude='*log2' --exclude='*~' --exclude='.*~' --exclude='.#*' --exclude='*.bak' --exclude='*.orig' --exclude='*.rej' --exclude='core.[0-9]*' --exclude=.depend --exclude='.*.o.flags' --exclude='*.gz' --exclude=.depend --exclude='.*.o.flags' --exclude='*.gz' --exclude=vmlinux --exclude=vmlinux.bin --exclude=yamon-02.06-SIGMADESIGNS-01_el.bin linux-2.6.15.ref/arch/mips/configs/tango3_defconfig linux-2.6.15/arch/mips/configs/tango3_defconfig
--- linux-2.6.15.ref/arch/mips/configs/tango3_defconfig	2007-06-20 12:06:10.000000000 -0700
+++ linux-2.6.15/arch/mips/configs/tango3_defconfig	2007-06-20 12:07:42.000000000 -0700
@@ -231,6 +231,9 @@
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -241,6 +244,7 @@
 #
 # PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -349,9 +353,14 @@
 #
 # Block devices
 #
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
@@ -379,6 +388,7 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
@@ -420,7 +430,38 @@
 # SCSI low-level drivers
 #
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -432,14 +473,19 @@
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
+# CONFIG_I2O is not set
 
 #
 # Network device support
@@ -451,6 +497,11 @@
 # CONFIG_TUN is not set
 
 #
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
 # PHY device support
 #
 # CONFIG_PHYLIB is not set
@@ -460,18 +511,45 @@
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -482,8 +560,11 @@
 # Wan interfaces
 #
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -529,6 +610,7 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -546,10 +628,12 @@
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -605,8 +689,9 @@
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -625,6 +710,7 @@
 #
 # InfiniBand support
 #
+# CONFIG_INFINIBAND is not set
 
 #
 # SN Devices
diff -Naur --exclude=CVS --exclude='*.o' --exclude='*.a' --exclude='*.so' --exclude='*.elf' --exclude=System.map --exclude=Makefile.d --exclude='*log' --exclude='*log2' --exclude='*~' --exclude='.*~' --exclude='.#*' --exclude='*.bak' --exclude='*.orig' --exclude='*.rej' --exclude='core.[0-9]*' --exclude=.depend --exclude='.*.o.flags' --exclude='*.gz' --exclude=.depend --exclude='.*.o.flags' --exclude='*.gz' --exclude=vmlinux --exclude=vmlinux.bin --exclude=yamon-02.06-SIGMADESIGNS-01_el.bin linux-2.6.15.ref/arch/mips/Kconfig linux-2.6.15/arch/mips/Kconfig
--- linux-2.6.15.ref/arch/mips/Kconfig	2007-06-20 12:06:10.000000000 -0700
+++ linux-2.6.15/arch/mips/Kconfig	2007-06-20 12:07:42.000000000 -0700
@@ -737,6 +737,7 @@
 	select OWN_DMA
 	select DMA_TANGOX
 	select DMA_NONCOHERENT
+	select HW_HAS_PCI
 	help
 	  Add support for Sigma Designs SMP863x board. Say Y here to
 	  support this machine type.
@@ -754,6 +755,7 @@
 	select OWN_DMA
 	select DMA_TANGOX
 	select DMA_NONCOHERENT
+	select HW_HAS_PCI