extint_test.c

来自「NXP LPC系列AMR7的开发程序源码（LCD」· C语言 代码 · 共 100 行

/*****************************************************************************
 *   eint_test.c:  main C entry file for NXP LPC29xx Family Microprocessors
 *
 *   Copyright(C) 2007, NXP Semiconductor
 *   All rights reserved.
 *
 *   History
 *   2007.07.19  ver 1.00    Prelimnary version, first Release
 *
******************************************************************************/
#include "LPC29xx.h"                        /* LPC29xx definitions */
#include "type.h"
#include "target.h"
#include "irq.h"
#include "extint.h"
#include <intrinsics.h> /* for interrupts iar */

extern volatile DWORD eint_counter;

#define MIN_LED_POSI		24
#define MAX_LED_POSI		30

#if HITEX_BOARD
/* The order is 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 */
DWORD SevenSegmentTable[11] = { 0x5F, 0x03, 0x3E, 0x2F, 0x63, 0x6D, 
				0x7D, 0x07, 0x7F, 0x67, 0x5F };
#endif

/*****************************************************************************
**   Main Function  main()
******************************************************************************/
int main (void)
{
  DWORD counter=0, led_posi;
   	    		
  /*** The main Function is an endless loop ****/
  EventRouter_Init();

  __enable_interrupt(); // iar
  
#if HITEX_BOARD
  /* GPIO are 7 Seg pins set to output */
  GPIO0_DR = (1<<29)|(1<<30);
  GPIO1_DR = (1<<9)|(1<<24)|(1<<25)|(1<<26)|(1<<27)|(1<<28)|(1<<29)|(1<<30);
#else
  /* GPIO 1.24~29 are LED pins set to output */
  GPIO1_DR = (1<<24)|(1<<25)|(1<<26)|(1<<27)|(1<<28)|(1<<29);
#endif


#if HITEX_BOARD
  GPIO0_OR = 0x60000000;
  GPIO1_OR = 0x00000000;
  GPIO1_OR |= (SevenSegmentTable[counter]<<24);

  while ( 1 )
  {
	if ( eint_counter == counter )
	{
	  GPIO1_OR &= ~0xFF000000;
	  GPIO1_OR |= (SevenSegmentTable[counter]<<24);
	  counter++;

	  if ( counter > 10 )
	  {
		eint_counter = 0;
		counter = 0;
	  }
	}
  }
#else 
  /* Loop forever */
  GPIO1_OR = 0x0000000;
  led_posi = MIN_LED_POSI;
  
  while ( 1 )
  {
	if ( eint_counter == counter )
	{
	  GPIO1_OR = 1 << led_posi;
	  counter++;
	  led_posi++;
	  if ( led_posi > MAX_LED_POSI )
	  {
		led_posi = MIN_LED_POSI;
		eint_counter = 0;
		counter = 0;
		GPIO1_OR = 0x0000000;
	  }
	}
  }
#endif
  
  return 0;
}

/*********************************************************************************
**                            End Of File
*********************************************************************************/