ad0809.c

34个单片机的设计资料

#include <AT89X52.H> 
unsigned char code dispbitcode[]={0xfe,0xfd,0xfb,0xf7, 0xef,0xdf,0xbf,0x7f}; 
unsigned char code dispcode[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x00}; 
unsigned char dispbuf[8]={10,10,10,10,10,10,10,10};
unsigned char code channel[8]={0x8c,0x9c,0xac,0xbc,0xcc,0xdc,0xec,0xfc};
unsigned char dispcount; 
sbit ST=P3^0; 
sbit OE=P3^1; 
sbit EOC=P3^2; 
//unsigned char channel=0xbc; //1011 1100，ABC＝110选择第三通道同时使ST=0，OE=0输出数据线呈高阻状态，EOC=1。
unsigned char d=3;

unsigned char getdata;   
long int i;
unsigned char f=0;
void main(void) 
{ 
  TMOD=0x11; 
  TH0=(65536-4000)/256; 
  TL0=(65536-4000)%256;
  TH1=(65535-15535)/256;
  TL1=(65536-15535)%256; 
  TR0=1; 
  ET0=1;
  ET1=1;
  TR1=1; 
  EA=1; 
  P3=channel[d]; 
  
  while(1) 
    { 
      ST=0; 
      ST=1; 
      ST=0; 
      while(EOC==0); 
      OE=1; 
      getdata=P0; 
      OE=0; 
i=getdata*196;
dispbuf[5]=i/10000; 
i=i%10000; 
dispbuf[6]=i/1000;
i=i%1000; 
dispbuf[7]=i/100; 
    } 
}   
void t0(void) interrupt 1 using 0 
{ 
  TH0=(65536-6000)/256; 
  TL0=(65536-6000)%256; 
  P2=0xff;
  P1=dispcode[dispbuf[dispcount]]; 
  P2=dispbitcode[dispcount]; 
  if(dispcount==5)
  {
     P1=P1|0x80;
  }	
  dispcount++; 
  if(dispcount==8) 
    { 
      dispcount=0; 
    } 
  if(f==50)f=0;
  else f++;
  if(d==7)d=0;
  d++;
} 
/*void t1() interrupt 3 using 0
{ 
  if(f<50)f=f+1;
  f=0;
  TH1=(65535-15535)/256;
  TL1=(65536-15535)%256;
  if(d<7)d=d+1;
  d=1;
}*/