📄 lcd.c

📁 2410得测试程序
💻 C
📖 第 1 页 / 共 3 页
字号:
上一页 1 23
	Glib_Line(0+320,0,319+320,239,255);		
	Glib_Line(0+320,239,319+320,0,255);

	// 00
	// #0
	Glib_Rectangle(0,0+240,319,239+240,255);
	Glib_Line(0,0+240,319,239+240,255);		
	Glib_Line(0,239+240,319,0+240,255);

	// 00
	// 0#
	Glib_Rectangle(0+320,0+240,319+320,239+240,255);
	Glib_Line(0+320,0+240,319+320,239+240,255);	
	Glib_Line(0+320,239+240,319+320,0+240,255);
	Glib_Rectangle(50+320,50+240,269+320,189+240,255);

	Uart_Printf("TFT 256 color mode test 4. Press any key!\n");
	Uart_Getch();	
	
	Glib_ClearScr(0, MODE_TFT_8BIT_640480);
	k=0;
	for(i=320;i<960;i+=40){
		for(j=240;j<720;j+=30)
		{
			Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
			k++;
		}
	}
	// #0			
	// 00			
	Glib_Rectangle(0,0,639,479,255);	
	Glib_Line(0,0,639,479,255);		
	Glib_Line(0,479,639,0,255);

	// 0#
	// 00
	Glib_Rectangle(0+640,0,639+640,479,255);	
	Glib_Line(0+640,0,639+640,479,255);		
	Glib_Line(0+640,479,639+640,0,255);

	// 00
	// #0
	Glib_Rectangle(0,0+480,639,479+480,255);	
	Glib_Line(0,0+480,639,479+480,255);		
	Glib_Line(0,479+480,639,0+480,255);

	// 00
	// 0#
	Glib_Rectangle(0+640,0+480,639+640,479+480,255);	
	Glib_Line(0+640,0+480,639+640,479+480,255);		
	Glib_Line(0+640,479+480,639+640,0+480,255);
	Glib_Rectangle(50+640,50+480,639+640-50,479+480-50,255);	

	Uart_Printf("Virtual Screen Test(TFT 256 color). Press any key[ijkm\\r]!\n");
	MoveViewPort(MODE_TFT_8BIT_640480);
	Lcd_MoveViewPort(0,0,MODE_TFT_8BIT_640480);
	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}

void Test_Lcd_Tft_8Bit_640480_Palette(void)
{
	int i,j,k;
	unsigned char cdata, p_red, p_green, p_blue;
	U32 *palette;

	Lcd_Palette8Bit_Init();
	Lcd_Port_Init();
	Lcd_Init(MODE_TFT_8BIT_640480);
	Glib_Init(MODE_TFT_8BIT_640480);
	Uart_Printf("[TFT 256 COLOR(8bit/1pixel) Palette TEST]\n");
	Glib_ClearScr(0, MODE_TFT_8BIT_640480);
	rTPAL = (1<<24)|((0xff)<<0); // Enable Temporary Palette : Blue
	Lcd_PowerEnable(0, 1);
	Lcd_EnvidOnOff(1);
	Uart_Printf("Temporary palette test. Press any key!\n");	
	Uart_Getch();	

	k=0;
	for(i=0;i<640;i+=40){
		for(j=0;j<480;j+=30)
		{ 
			Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
			k++;
		}
	}
	rTPAL = 0;
	Uart_Printf("Press any key to test writing palette during non-active.\n");

	palette=(U32 *)PALETTE;
	for(cdata=0;cdata<255;cdata++)
	{
		p_red=(cdata | 0xe0);
		p_green=(cdata | 0x1c);
		p_blue=(cdata | 0x03);

		while((rLCDCON5>>19)==2);
		*palette++=((U32)((p_red<<8)|(p_green<<6)|(p_blue<<3)));
		Uart_Printf("VSTATUS=%x\n",(rLCDCON5>>19));
		Uart_Printf("cdata=%d\n",(int)cdata);
	}
	*palette=0x0;	
	Uart_Getch();
	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}

void Test_Lcd_Tft_8Bit_640480_Bswp(void)
{
	int k;
	Lcd_Palette8Bit_Init();
	Lcd_Port_Init();
	Lcd_Init(MODE_TFT_8BIT_640480);
	Glib_Init(MODE_TFT_8BIT_640480);
	Lcd_EnvidOnOff(1);
	Lcd_PowerEnable(0, 1);
	rLCDCON5 &= 0x1ffffd;	//BSWP Disable
	Uart_Printf("[TFT 256 COLOR(16bit/1pixel) BSWP TEST]\n");

	Glib_ClearScr(0, MODE_TFT_8BIT_640480);
	Glib_Rectangle(0,0,639,479,0xff);
	Glib_Rectangle(1,1,638,478,0x03);
	Glib_Rectangle(0+100,0+100,639-100,479-100,0xff);
	Glib_Rectangle(1+100,1+100,638-100,478-100,0x03);
	Glib_Line(0,0,639,479,0xe0);	
	Glib_Line(639,0,0,479,0x1c);
	Uart_Printf("TFT 256 color BSWP test. Press any key excet return!\n");

	while(Uart_Getch()!='\r')
	{
		rLCDCON5 &= 0x1ffffd;	//BSWP Disable
		rLCDCON5 |= ((k%2)<<1);	//BSWP Enable
		k++;
	}

	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}

void Test_Lcd_Tft_16Bit_640480(void)
{
	int i,j,k;
	Lcd_Port_Init();
	Lcd_Init(MODE_TFT_16BIT_640480);
	Glib_Init(MODE_TFT_16BIT_640480);
	Lcd_PowerEnable(0, 1);
	Lcd_EnvidOnOff(1);
	Uart_Printf("[TFT 64K COLOR(16bit/1pixel) LCD TEST]\n");

	Glib_ClearScr(0, MODE_TFT_16BIT_640480);
	Glib_FilledRectangle(0,0,639,479,0xf800);	
	Uart_Printf("TFT 64K color mode test 1. Press any key!\n");
	Uart_Getch();	

	Glib_ClearScr(0, MODE_TFT_16BIT_640480);
	Glib_Rectangle(0,0,639,479,0x07e0);	
	Glib_FilledRectangle(0,0,20,20,65535);	
	Glib_Rectangle(620,460,639,479,65535);	
	Glib_Line(0,0,639,479,0x1f);		
	Glib_Line(639,0,0,479,0xf800);
	Uart_Printf("TFT 64K color mode test 2. Press any key!\n");
	Uart_Getch();	

	Glib_ClearScr(0, MODE_TFT_16BIT_640480);
	k=0;
	for(i=160;i<480;i+=20){
		for(j=120;j<360;j+=15)
		{
			while((rLCDCON5>>19)==2);
			Glib_FilledRectangle(i,j,i+19,j+14,k);
			k+=500;
		}
	}
	// #0			
	// 00			
	Glib_Rectangle(0,0,319,239,65535);	
	Glib_Line(0,0,319,239,65535);		
	Glib_Line(0,239,319,0,65535);

	// 0#
	// 00
	Glib_Rectangle(0+320,0,319+320,239,255);
	Glib_Line(0+320,0,319+320,239,255);		
	Glib_Line(0+320,239,319+320,0,255);

	// 00
	// #0
	Glib_Rectangle(0,0+240,319,239+240,255);
	Glib_Line(0,0+240,319,239+240,255);		
	Glib_Line(0,239+240,319,0+240,255);

	// 00
	// 0#
	Glib_Rectangle(0+320,0+240,319+320,239+240,255);
	Glib_Line(0+320,0+240,319+320,239+240,255);	
	Glib_Line(0+320,239+240,319+320,0+240,255);
	Glib_Rectangle(50+320,50+240,269+320,189+240,255);

	Uart_Printf("TFT 64K color mode test 3. Press any key!\n");
	Uart_Getch();	

	Glib_ClearScr(0, MODE_TFT_16BIT_640480);
	k=0;
	for(i=320;i<960;i+=40){
		for(j=240;j<720;j+=30)
		{
			Glib_FilledRectangle(i,j,i+39,j+29,k);
			k+=500;
		}
	}
	// #0			
	// 00			
	Glib_Rectangle(0,0,639,479,65535);	
	Glib_Line(0,0,639,479,65535);		
	Glib_Line(0,479,639,0,65535);

	// 0#
	// 00
	Glib_Rectangle(0+640,0,639+640,479,65535);	
	Glib_Line(0+640,0,639+640,479,65535);		
	Glib_Line(0+640,479,639+640,0,65535);

	// 00
	// #0
	Glib_Rectangle(0,0+480,639,479+480,65535);	
	Glib_Line(0,0+480,639,479+480,65535);		
	Glib_Line(0,479+480,639,0+480,65535);

	// 00
	// 0#
	Glib_Rectangle(0+640,0+480,639+640,479+480,65535);	
	Glib_Line(0+640,0+480,639+640,479+480,65535);		
	Glib_Line(0+640,479+480,639+640,0+480,65535);
	Glib_Rectangle(50+640,50+480,639+640-50,479+480-50,65535);	

	Uart_Printf("Virtual Screen Test(TFT 64K color). Press any key[ijkm\\r]!\n");
	MoveViewPort(MODE_TFT_16BIT_640480);
	Lcd_MoveViewPort(0,0,MODE_TFT_16BIT_640480);
	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}

void Test_Lcd_Tft_16Bit_640480_Hwswp(void)
{
	int k;
	Lcd_Port_Init();
	Lcd_Init(MODE_TFT_16BIT_640480);
	Glib_Init(MODE_TFT_16BIT_640480);
	Lcd_PowerEnable(0, 1);
	Lcd_EnvidOnOff(1);
	rLCDCON5 &= 0x1ffffe;	//HWSWP Disable
	Uart_Printf("[TFT 64K COLOR(16bit/1pixel) HWSWP TEST]\n");

	Glib_ClearScr(0, MODE_TFT_16BIT_640480);
	Glib_Rectangle(0,0,639,479,0xffff);
	Glib_Rectangle(1,1,638,478,0xf800);
	Glib_Rectangle(0+100,0+100,639-100,479-100,0xffff);
	Glib_Rectangle(1+100,1+100,638-100,478-100,0xf800);
	Glib_Line(0,0,639,479,0x7e0);	
	Glib_Line(639,0,0,479,0x1f);
	Uart_Printf("TFT 64K color HWSWP test. Press any key excet return!\n");

	while(Uart_Getch()!='\r')
	{
		rLCDCON5 &= 0x1ffffe;	//HWSWP Disable
		rLCDCON5 |= (k%2);		//HWSWP Enable
		k++;
	}

	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}

void Test_Lcd_Tft_1Bit_800600(void)
{
//	int i,j;
	Lcd_Port_Init();
	Lcd_Palette1Bit_Init(); 
	Lcd_Init(MODE_TFT_1BIT_800600);
	Glib_Init(MODE_TFT_1BIT_800600);
	Uart_Printf("[TFT Mono(1bit/1pixel) LCD TEST]\n");

	rTPAL = (1<<24)|((0xff)<<0); // Enable Temporary Palette : Blue
//--------LCD FIFO interrupt test---------------------------------------------------START
	Lcd_EnvidOnOff(1); // Enable ENVID	
	//The content of GPG4 is changed to OUTPUT('01'). 
	//We will check the frame interrupt with using Logic Analyzer. 
	rGPGUP=rGPGUP&(~(1<<4))|(1<<4); // Pull-up disable
	rGPGDAT=rGPGDAT&(~(1<<4))|(1<<4); // GPG4=High
	rGPGCON=rGPGCON&(~(3<<8))|(1<<8); // GPG4=Output

	pISR_LCD=(unsigned)Lcd_Int_Fifo_640480;
	rINTMSK=~(BIT_LCD);
	rLCDINTMSK=(0<<2)|(1<<1)|(0); // 4Words Trigger Level,Mask Frame int,Unmask Fifo int
//	rLCDINTMSK=(1<<2)|(1<<1)|(0); // 8Words Trigger Level,Mask Frame int,Unmask Fifo int	
//	Lcd_EnvidOnOff(1); // Enable ENVID		
//--------LCD FIFO interrupt test-----------------------------------------------------END
	Uart_Printf("TFT Mono mode test 1. Press any key!\n");
	Uart_Getch();	

	rTPAL = 0; // Disable TPAL
	Glib_FilledRectangle(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);
	Uart_Printf("TFT Mono mode test 2. Press any key!\n");
	Uart_Getch();	

	Glib_FilledRectangle(200,200,LCD_XSIZE_TFT_800600-201,LCD_YSIZE_TFT_800600-201,0);	
	Uart_Printf("TFT Mono mode test 3. Press any key!\n");
	Uart_Getch();	

	Glib_ClearScr(0, MODE_TFT_1BIT_800600);
	Glib_Rectangle(200,200,SCR_XSIZE_TFT_800600-201,SCR_YSIZE_TFT_800600-201,1);
	
	// #0			
	// 00			
	Glib_Rectangle(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);	
	Glib_Line(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);		
	Glib_Line(0,LCD_YSIZE_TFT_800600-1,LCD_XSIZE_TFT_800600-1,0,1);

	// 0#
	// 00
	Glib_Rectangle(LCD_XSIZE_TFT_800600,0,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);	
	Glib_Rectangle(LCD_XSIZE_TFT_800600+100,100,SCR_XSIZE_TFT_800600-101,LCD_YSIZE_TFT_800600-101,1);	
	
	// 00
	// #0
	Glib_Rectangle(0,LCD_YSIZE_TFT_800600,LCD_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,1);	
	Glib_Rectangle(200,LCD_YSIZE_TFT_800600+200,LCD_XSIZE_TFT_800600-201,SCR_YSIZE_TFT_800600-201,1);	

	// 00
	// 0#
	Glib_Rectangle(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,1);	
	Glib_Line(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,1);		
	Glib_Line(LCD_XSIZE_TFT_800600,SCR_YSIZE_TFT_800600-1,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600,1);

	Uart_Printf("Virtual Screen Test(Mono). Press any key[ijkm\\r]!\n");
	MoveViewPort(MODE_TFT_1BIT_800600);
	Lcd_MoveViewPort(0,0,MODE_TFT_1BIT_800600);
//--------LCD FIFO interrupt test---------------------------------------------------START
	rLCDINTMSK|=3; // Mask LCD SUB Interrupt
	rINTMSK|=(BIT_LCD); // Mask LCD INT
//--------LCD FIFO interrupt test-----------------------------------------------------END	
	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}

void Test_Lcd_Tft_8Bit_800600(void)
{
	int i,j,k;
	Lcd_Port_Init();
	Lcd_Palette8Bit_Init();
	Lcd_Init(MODE_TFT_8BIT_800600);
	Glib_Init(MODE_TFT_8BIT_800600);
	Uart_Printf("[TFT 256 COLOR(8bit/1pixel) LCD TEST]\n");

	rTPAL = (1<<24)|((0xff)<<0); // Enable Temporary Palette : Blue
//--------LCD FIFO interrupt test---------------------------------------------------START
	Lcd_EnvidOnOff(1); // Enable ENVID	
	//The content of GPG4 is changed to OUTPUT('01'). 
	//We will check the frame interrupt with using Logic Analyzer. 
	rGPGUP=rGPGUP&(~(1<<4))|(1<<4); // Pull-up disable
	rGPGDAT=rGPGDAT&(~(1<<4))|(1<<4); // GPG4=High
	rGPGCON=rGPGCON&(~(3<<8))|(1<<8); // GPG4=Output

	pISR_LCD=(unsigned)Lcd_Int_Fifo_640480;
	rINTMSK=~(BIT_LCD);
	rLCDINTMSK=(0<<2)|(1<<1)|(0); // 4Words Trigger Level,Mask Frame int,Unmask Fifo int
//		rLCDINTMSK=(1<<2)|(1<<1)|(0); // 8Words Trigger Level,Mask Frame int,Unmask Fifo int	
//		Lcd_EnvidOnOff(1); // Enable ENVID		
//--------LCD FIFO interrupt test-----------------------------------------------------END
	Uart_Printf("TFT 256 color mode test 1. Press any key!\n");
	Uart_Getch();	

	Glib_ClearScr(0, MODE_TFT_8BIT_800600);
	rTPAL = 0;
	k=0;
	for(i=0;i<LCD_XSIZE_TFT_800600;i+=40){
		for(j=0;j<LCD_YSIZE_TFT_800600;j+=30)
		{ 
			Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
			k++;
		}
	}
	Uart_Printf("TFT 256 color mode test 2. Press any key!\n");
	Uart_Getch();	

	Glib_ClearScr(0xff, MODE_TFT_8BIT_800600);
	Uart_Printf("TFT 256 color mode test 3. Press any key!\n");
	Uart_Getch();

	Glib_ClearScr(0, MODE_TFT_8BIT_800600);
	k=0;
	for(i=(SCR_XSIZE_TFT_800600/4);i<(SCR_XSIZE_TFT_800600*(3/4));i+=40){
		for(j=SCR_YSIZE_TFT_800600/4;j<(SCR_YSIZE_TFT_800600*(3/4));j+=30)
		{
			Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
			k++;
		}
	}
	// #0			
	// 00			
	Glib_Rectangle(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,0xff);	
	Glib_Line(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,0xff);		
	Glib_Line(0,LCD_YSIZE_TFT_800600-1,LCD_XSIZE_TFT_800600-1,0,0xff);

	// 0#
	// 00
	Glib_Rectangle(LCD_XSIZE_TFT_800600,0,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,0xf0);	
	Glib_Rectangle(LCD_XSIZE_TFT_800600+100,100,SCR_XSIZE_TFT_800600-101,LCD_YSIZE_TFT_800600-101,0xf0);	
	
	// 00
	// #0
	Glib_Rectangle(0,LCD_YSIZE_TFT_800600,LCD_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,0x0f);	
	Glib_Rectangle(200,LCD_YSIZE_TFT_800600+200,LCD_XSIZE_TFT_800600-201,SCR_YSIZE_TFT_800600-201,0x0f);	

	// 00
	// 0#
	Glib_Rectangle(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,0xff);	
	Glib_Line(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,0xff);		
	Glib_Line(LCD_XSIZE_TFT_800600,SCR_YSIZE_TFT_800600-1,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600,0xff);

	Uart_Printf("Virtual Screen Test(TFT 256 color). Press any key[ijkm\\r]!\n");
	MoveViewPort(MODE_TFT_8BIT_800600);
	Lcd_MoveViewPort(0,0,MODE_TFT_8BIT_800600);
//--------LCD FIFO interrupt test---------------------------------------------------START
	rLCDINTMSK|=3; // Mask LCD SUB Interrupt
	rINTMSK|=(BIT_LCD); // Mask LCD INT
//--------LCD FIFO interrupt test-----------------------------------------------------END
	Lcd_EnvidOnOff(0);
	Lcd_Port_Return();
}
上一页 1 23
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -