msp430xg46x.h

基于MSP430FG4618MCU的铭正同创LCD驱动程序。

#define FSSEL_0             (0x0000)  /* Flash clock select: 0 - ACLK */
#define FSSEL_1             (0x0040)  /* Flash clock select: 1 - MCLK */
#define FSSEL_2             (0x0080)  /* Flash clock select: 2 - SMCLK */
#define FSSEL_3             (0x00C0)  /* Flash clock select: 3 - SMCLK */

#define BUSY                (0x0001)  /* Flash busy: 1 */
#define KEYV                (0x0002)  /* Flash Key violation flag */
#define ACCVIFG             (0x0004)  /* Flash Access violation flag */
#define WAIT                (0x0008)  /* Wait flag for segment write */
#define LOCK                (0x0010)  /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX                (0x0020)  /* Flash Emergency Exit */

/************************************************************
* SYSTEM CLOCK, FLL+
************************************************************/
#define __MSP430_HAS_FLLPLUS__        /* Definition to show that Module is available */

#define SCFI0_              (0x0050)  /* System Clock Frequency Integrator 0 */
DEFC(   SCFI0             , SCFI0_)
#define FN_2                (0x04)    /* fDCOCLK =   1.4-12MHz*/
#define FN_3                (0x08)    /* fDCOCLK =   2.2-17Mhz*/
#define FN_4                (0x10)    /* fDCOCLK =   3.2-25Mhz*/
#define FN_8                (0x20)    /* fDCOCLK =     5-40Mhz*/
#define FLLD0               (0x40)    /* Loop Divider Bit : 0 */
#define FLLD1               (0x80)    /* Loop Divider Bit : 1 */

#define FLLD_1              (0x00)    /* Multiply Selected Loop Freq. By 1 */
#define FLLD_2              (0x40)    /* Multiply Selected Loop Freq. By 2 */
#define FLLD_4              (0x80)    /* Multiply Selected Loop Freq. By 4 */
#define FLLD_8              (0xC0)    /* Multiply Selected Loop Freq. By 8 */

#define SCFI1_              (0x0051)  /* System Clock Frequency Integrator 1 */
DEFC(   SCFI1             , SCFI1_)
#define SCFQCTL_            (0x0052)  /* System Clock Frequency Control */
DEFC(   SCFQCTL           , SCFQCTL_)
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K            0x00                        fMCLK=1*fACLK       only a range from */
#define SCFQ_64K            (0x01)                     /* fMCLK=2*fACLK          1+1 to 127+1 is possible */
#define SCFQ_128K           (0x03)                     /* fMCLK=4*fACLK */
#define SCFQ_256K           (0x07)                     /* fMCLK=8*fACLK */
#define SCFQ_512K           (0x0F)                     /* fMCLK=16*fACLK */
#define SCFQ_1M             (0x1F)                     /* fMCLK=32*fACLK */
#define SCFQ_2M             (0x3F)                     /* fMCLK=64*fACLK */
#define SCFQ_4M             (0x7F)                     /* fMCLK=128*fACLK */
#define SCFQ_M              (0x80)                     /* Modulation Disable */

#define FLL_CTL0_           (0x0053)  /* FLL+ Control 0 */
DEFC(   FLL_CTL0          , FLL_CTL0_)
#define DCOF                (0x01)                     /* DCO Fault Flag */
#define LFOF                (0x02)                     /* Low Frequency Oscillator Fault Flag */
#define XT1OF               (0x04)                     /* High Frequency Oscillator 1 Fault Flag */
#define XT2OF               (0x08)                     /* High Frequency Oscillator 2 Fault Flag */
#define OSCCAP0             (0x10)                     /* XIN/XOUT Cap 0 */
#define OSCCAP1             (0x20)                     /* XIN/XOUT Cap 1 */
#define XTS_FLL             (0x40)                     /* 1: Selects high-freq. oscillator */
#define DCOPLUS             (0x80)                     /* DCO+ Enable */

#define XCAP0PF             (0x00)                     /* XIN Cap = XOUT Cap = 0pf */
#define XCAP10PF            (0x10)                     /* XIN Cap = XOUT Cap = 10pf */
#define XCAP14PF            (0x20)                     /* XIN Cap = XOUT Cap = 14pf */
#define XCAP18PF            (0x30)                     /* XIN Cap = XOUT Cap = 18pf */
#define OSCCAP_0            (0x00)                     /* XIN Cap = XOUT Cap = 0pf */
#define OSCCAP_1            (0x10)                     /* XIN Cap = XOUT Cap = 10pf */
#define OSCCAP_2            (0x20)                     /* XIN Cap = XOUT Cap = 14pf */
#define OSCCAP_3            (0x30)                     /* XIN Cap = XOUT Cap = 18pf */

#define FLL_CTL1_           (0x0054)  /* FLL+ Control 1 */
DEFC(   FLL_CTL1          , FLL_CTL1_)
#define FLL_DIV0            (0x01)                     /* FLL+ Divide Px.x/ACLK 0 */
#define FLL_DIV1            (0x02)                     /* FLL+ Divide Px.x/ACLK 1 */
#define SELS                (0x04)                     /* Peripheral Module Clock Source (0: DCO, 1: XT2) */
#define SELM0               (0x08)                     /* MCLK Source Select 0 */
#define SELM1               (0x10)                     /* MCLK Source Select 1 */
#define XT2OFF              (0x20)                     /* High Frequency Oscillator 2 (XT2) disable */
#define SMCLKOFF            (0x40)                     /* Peripheral Module Clock (SMCLK) disable */
#define LFXT1DIG            (0x80)                     /* Enable Digital input for LF clock */

#define FLL_DIV_1           (0x00)                     /* FLL+ Divide Px.x/ACLK By 1 */
#define FLL_DIV_2           (0x01)                     /* FLL+ Divide Px.x/ACLK By 2 */
#define FLL_DIV_4           (0x02)                     /* FLL+ Divide Px.x/ACLK By 4 */
#define FLL_DIV_8           (0x03)                     /* FLL+ Divide Px.x/ACLK By 8 */

#define SELM_DCO            (0x00)                     /* Select DCO for CPU MCLK */
#define SELM_XT2            (0x10)                     /* Select XT2 for CPU MCLK */
#define SELM_A              (0x18)                     /* Select A (from LFXT1) for CPU MCLK */

/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG               0x02 */
/* #define OFIE                0x02 */

/************************************************************
* LCD_A
************************************************************/
#define __MSP430_HAS_LCD_A__          /* Definition to show that Module is available */

#define LCDACTL_            (0x0090)  /* LCD_A Control Register */
DEFC(   LCDACTL           , LCDACTL_)
#define LCDON               (0x01)
#define LCDSON              (0x04)
#define LCDMX0              (0x08)
#define LCDMX1              (0x10)
#define LCDFREQ0            (0x20)
#define LCDFREQ1            (0x40)
#define LCDFREQ2            (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC           (LCDSON)
#define LCD2MUX             (LCDMX0+LCDSON)
#define LCD3MUX             (LCDMX1+LCDSON)
#define LCD4MUX             (LCDMX1+LCDMX0+LCDSON)
/* Frequency select code with Bits 5-7 */
#define LCDFREQ_32          (0x00)    /* LCD Freq: ACLK divided by 32 */
#define LCDFREQ_64          (0x20)    /* LCD Freq: ACLK divided by 64 */
#define LCDFREQ_96          (0x40)    /* LCD Freq: ACLK divided by 96 */
#define LCDFREQ_128         (0x60)    /* LCD Freq: ACLK divided by 128 */
#define LCDFREQ_192         (0x80)    /* LCD Freq: ACLK divided by 192 */
#define LCDFREQ_256         (0xA0)    /* LCD Freq: ACLK divided by 256 */
#define LCDFREQ_384         (0xC0)    /* LCD Freq: ACLK divided by 384 */
#define LCDFREQ_512         (0xE0)    /* LCD Freq: ACLK divided by 512 */

#define LCDAPCTL0_          (0x00AC)  /* LCD_A Port Control Register 0 */
DEFC(   LCDAPCTL0         , LCDAPCTL0_)
#define LCDS0               (0x01)    /* LCD Segment  0 to  3 Enable. */
#define LCDS4               (0x02)    /* LCD Segment  4 to  7 Enable. */
#define LCDS8               (0x04)    /* LCD Segment  8 to 11 Enable. */
#define LCDS12              (0x08)    /* LCD Segment 12 to 15 Enable. */
#define LCDS16              (0x10)    /* LCD Segment 16 to 19 Enable. */
#define LCDS20              (0x20)    /* LCD Segment 20 to 23 Enable. */
#define LCDS24              (0x40)    /* LCD Segment 24 to 27 Enable. */
#define LCDS28              (0x80)    /* LCD Segment 28 to 31 Enable. */

#define LCDAPCTL1_          (0x00AD)  /* LCD_A Port Control Register 1 */
DEFC(   LCDAPCTL1         , LCDAPCTL1_)
#define LCDS32              (0x01)    /* LCD Segment 32 to 35 Enable. */
#define LCDS36              (0x02)    /* LCD Segment 36 to 39 Enable. */

#define LCDAVCTL0_          (0x00AE)  /* LCD_A Voltage Control Register 0 */
DEFC(   LCDAVCTL0         , LCDAVCTL0_)
#define LCD2B               (0x01)    /* Selects 1/2 bias. */
#define VLCDREF0            (0x02)    /* Selects reference voltage for regulated charge pump: 0 */
#define VLCDREF1            (0x04)    /* Selects reference voltage for regulated charge pump: 1 */
#define LCDCPEN             (0x08)    /* LCD Voltage Charge Pump Enable. */
#define VLCDEXT             (0x10)    /* Select external source for VLCD. */
#define LCDREXT             (0x20)    /* Selects external connections for LCD mid voltages. */
#define LCDR03EXT           (0x40)    /* Selects external connection for lowest LCD voltage. */

/* Reference voltage source select for the regulated charge pump */
#define VLCDREF_0           (0<<1)    /* Internal */
#define VLCDREF_1           (1<<1)    /* External */
#define VLCDREF_2           (2<<1)    /* Reserved */
#define VLCDREF_3           (3<<1)    /* Reserved */

#define LCDAVCTL1_          (0x00AF)  /* LCD_A Voltage Control Register 1 */
DEFC(   LCDAVCTL1         , LCDAVCTL1_)
#define VLCD0               (0x02)    /* VLCD select: 0 */
#define VLCD1               (0x04)    /* VLCD select: 1 */
#define VLCD2               (0x08)    /* VLCD select: 2 */
#define VLCD3               (0x10)    /* VLCD select: 3 */

/* Charge pump voltage selections */
#define VLCD_0              (0<<1)    /* Charge pump disabled */
#define VLCD_1              (1<<1)    /* VLCD = 2.60V */
#define VLCD_2              (2<<1)    /* VLCD = 2.66V */
#define VLCD_3              (3<<1)    /* VLCD = 2.72V */
#define VLCD_4              (4<<1)    /* VLCD = 2.78V */
#define VLCD_5              (5<<1)    /* VLCD = 2.84V */
#define VLCD_6              (6<<1)    /* VLCD = 2.90V */
#define VLCD_7              (7<<1)    /* VLCD = 2.96V */
#define VLCD_8              (8<<1)    /* VLCD = 3.02V */
#define VLCD_9              (9<<1)    /* VLCD = 3.08V */
#define VLCD_10             (10<<1)   /* VLCD = 3.14V */
#define VLCD_11             (11<<1)   /* VLCD = 3.20V */
#define VLCD_12             (12<<1)   /* VLCD = 3.26V */
#define VLCD_13             (12<<1)   /* VLCD = 3.32V */
#define VLCD_14             (13<<1)   /* VLCD = 3.38V */
#define VLCD_15             (15<<1)   /* VLCD = 3.44V */

#define VLCD_DISABLED       (0<<1)    /* Charge pump disabled */
#define VLCD_2_60           (1<<1)    /* VLCD = 2.60V */
#define VLCD_2_66           (2<<1)    /* VLCD = 2.66V */
#define VLCD_2_72           (3<<1)    /* VLCD = 2.72V */
#define VLCD_2_78           (4<<1)    /* VLCD = 2.78V */
#define VLCD_2_84           (5<<1)    /* VLCD = 2.84V */
#define VLCD_2_90           (6<<1)    /* VLCD = 2.90V */
#define VLCD_2_96           (7<<1)    /* VLCD = 2.96V */
#define VLCD_3_02           (8<<1)    /* VLCD = 3.02V */
#define VLCD_3_08           (9<<1)    /* VLCD = 3.08V */
#define VLCD_3_14           (10<<1)   /* VLCD = 3.14V */
#define VLCD_3_20           (11<<1)   /* VLCD = 3.20V */
#define VLCD_3_26           (12<<1)   /* VLCD = 3.26V */
#define VLCD_3_32           (12<<1)   /* VLCD = 3.32V */
#define VLCD_3_38           (13<<1)   /* VLCD = 3.38V */
#define VLCD_3_44           (15<<1)   /* VLCD = 3.44V */

#define LCDMEM_             (0x0091)  /* LCD Memory */
#ifndef __IAR_SYSTEMS_ICC
#define LCDMEM              (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM              ((char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_              (0x0091)  /* LCD Memory 1 */
DEFC(   LCDM1             , LCDM1_)
#define LCDM2_              (0x0092)  /* LCD Memory 2 */
DEFC(   LCDM2             , LCDM2_)
#define LCDM3_              (0x0093)  /* LCD Memory 3 */
DEFC(   LCDM3             , LCDM3_)
#define LCDM4_              (0x0094)  /* LCD Memory 4 */
DEFC(   LCDM4             , LCDM4_)
#define LCDM5_              (0x0095)  /* LCD Memory 5 */
DEFC(   LCDM5             , LCDM5_)
#define LCDM6_              (0x0096)  /* LCD Memory 6 */
DEFC(   LCDM6             , LCDM6_)
#define LCDM7_              (0x0097)  /* LCD Memory 7 */
DEFC(   LCDM7             , LCDM7_)
#define LCDM8_              (0x0098)  /* LCD Memory 8 */
DEFC(   LCDM8             , LCDM8_)
#define LCDM9_              (0x0099)  /* LCD Memory 9 */
DEFC(   LCDM9             , LCDM9_)
#define LCDM10_             (0x009A)  /* LCD Memory 10 */
DEFC(   LCDM10            , LCDM10_)
#define LCDM11_             (0x009B)  /* LCD Memory 11 */
DEFC(   LCDM11            , LCDM11_)
#define LCDM12_             (0x009C)  /* LCD Memory 12 */
DEFC(   LCDM12            , LCDM12_)
#define LCDM13_             (0x009D)  /* LCD Memory 13 */
DEFC(   LCDM13            , LCDM13_)
#define LCDM14_             (0x009E)  /* LCD Memory 14 */
DEFC(   LCDM14            , LCDM14_)
#define LCDM15_             (0x009F)  /* LCD Memory 15 */
DEFC(   LCDM15            , LCDM15_)
#define LCDM16_             (0x00A0)  /* LCD Memory 16 */
DEFC(   LCDM16            , LCDM16_)
#define LCDM17_             (0x00A1)  /* LCD Memory 17 */
DEFC(   LCDM17            , LCDM17_)
#define LCDM18_             (0x00A2)  /* LCD Memory 18 */
DEFC(   LCDM18            , LCDM18_)
#define LCDM19_             (0x00A3)  /* LCD Memory 19 */
DEFC(   LCDM19            , LCDM19_)
#define LCDM20_             (0x00A4)  /* LCD Memory 20 */
DEFC(   LCDM20            , LCDM20_)

#define LCDMA               (LCDM10)  /* LCD Memory A */
#define LCDMB               (LCDM11)  /* LCD Memory B */
#define LCDMC               (LCDM12)  /* LCD Memory C */
#define LCDMD               (LCDM13)  /* LCD Memory D */
#define LCDME               (LCDM14)  /* LCD Memory E */
#define LCDMF               (LCDM15)  /* LCD Memory F */

/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
#define __MSP430_HAS_MPY__            /* Definition to show that Module is available */

#define MPY_                (0x0130)  /* Multiply Unsigned/Operand 1 */
DEFW(   MPY               , MPY_)
#define MPYS_               (0x0132)  /* Multiply Signed/Operand 1 */
DEFW(   MPYS              , MPYS_)
#define MAC_                (0x0134)  /* Multiply Unsigned and Accumulate/Operand 1 */
DEFW(   MAC               , MAC_)
#define MACS_               (0x0136)  /* Multiply Signed and Accumulate/Operand 1 */
DEFW(   MACS              , MACS_)
#define OP2_                (0x0138)  /* Operand 2 */
DEFW(   OP2               , OP2_)
#define RESLO_