main.c

EasyARM615的KEIL下的调试程序,包含IO口,串口,SPI口等

/****************************************Copyright (c)**************************************************
**                               Guangzhou ZHIYUAN electronics Co.,LTD.
**                                     
**                                 http://www.embedtools.com
**
**--------------File Info-------------------------------------------------------------------------------
** File Name:          Main.c
** Last modified Date: 2007-03-24
** Last Version:       1.0
** Description:        Basic experiment of the quadrature encoder 正交编码器的基础实验
** 
**------------------------------------------------------------------------------------------------------
** Created By:         Steven Zhou 周绍刚
** Created date:       2007-04-05
** Version:            1.0
** Descriptions:       The original version 初始版本
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Description:
**
********************************************************************************************************/
#include    "hw_gpio.h"
#include    "hw_types.h"
#include    "hw_memmap.h"
#include    "sysctl.h"
#include    "gpio.h"
#include    "qei.h"


/*********************************************************************************************************
** Function name:			main
**
** Descriptions:			Main function of the project 工程的主函数
**
** Input parameters:		None 无
** Returned value:		None 无
**         
** Used global variables:	None 无
** Calling modules:		SysCtlPeripheralEnable,GPIODirModeSet,QEIConfigure,QEIVelocityConfigure
**                       QEIEnable,QEIVelocityEnable,QEIVelocityGet
**					  
** Created by:				Steven Zhou 周绍刚
** Created Date:			2007-03-24
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
int main(void)
{
	unsigned int i;
			
	SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOC); 			// 使能PC口外设 
	SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD); 			// 使能PD口外设
    SysCtlPeripheralEnable(SYSCTL_PERIPH_QEI);  			// 使能正交编码器外设 
       
 	GPIODirModeSet(GPIO_PORTC_BASE,  						// 选择PC4,PC6硬件功能
	               GPIO_PIN_4 | GPIO_PIN_6,  	
                   GPIO_DIR_MODE_HW);

    GPIODirModeSet(GPIO_PORTD_BASE, 	 					// 选择PD7硬件功能
	               GPIO_PIN_7, 
				   GPIO_DIR_MODE_HW); 	
	       
	QEIConfigure(QEI_BASE, 				 					// 使用A,B通道共4个边沿计算速度
	             (QEI_CONFIG_CAPTURE_A_B | QEI_CONFIG_NO_RESET | 
                  QEI_CONFIG_QUADRATURE | QEI_CONFIG_NO_SWAP),
                 0);
   	QEIVelocityConfigure(QEI_BASE, QEI_VELDIV_1, 60000);	// 设置速度检测周期为 0.01秒

        
    QEIEnable(QEI_BASE);     								// 使能正交编码器 
    QEIVelocityEnable(QEI_BASE);  							// 使能正交编码器的速度检测功能  
       	         
	while(1)
	{
		i = QEIVelocityGet(QEI_BASE);  						// 读出上一个周期的速度计数值
		i = (i*100*60)/(4*512);  							// 转化为 转/分钟
	}
}