main.lst

AT91SAM7X256芯片底层驱动源码。在IAR430环境下编译

   \   00000008   00E0               B           ??wait_0
   \                     ??wait_1:
   \   0000000A   401C               ADD         R0,R0,#+0x1
   \                     ??wait_0:
   \   0000000C   ....               LDR         R1,??DataTable1    ;; LedSpeed
   \   0000000E   0968               LDR         R1,[R1, #+0]
   \   00000010   8842               CMP         R0,R1
   \   00000012   FAD3               BCC         ??wait_1
     60          }//* End
   \   00000014   01BC               POP         {R0}
   \   00000016   0047               BX          R0                 ;; return
     61          
     62          
     63          //*--------------------------------------------------------------------------------------
     64          //* Function Name       : Main
     65          //* Object              : Software entry point
     66          //* Input Parameters    : none.
     67          //* Output Parameters   : none.
     68          //*--------------------------------------------------------------------------------------

   \                                 In segment CODE, align 4, keep-with-next
     69          int main()
     70          {//* Begin
   \                     main:
   \   00000000   F0B5               PUSH        {R4-R7,LR}
     71              int i;
     72              // First, enable the clock of the PIO
     73                 AT91F_PMC_EnablePeriphClock ( AT91C_BASE_PMC, 1 << AT91C_ID_PIOB ) ;
   \   00000002   1448               LDR         R0,??main_0        ;; 0xfffffc10
   \   00000004   0821               MOV         R1,#+0x8
   \   00000006   0160               STR         R1,[R0, #+0]
     74          
     75              // then, we configure the PIO Lines corresponding to LED1 to LED4
     76              // to be outputs. No need to set these pins to be driven by the PIO because it is GPIO pins only.
     77                 AT91F_PIO_CfgOutput( AT91D_BASE_PIO_LED, AT91B_LED_MASK ) ;
   \   00000008   F020               MOV         R0,#+0xF0
   \   0000000A   C003               LSL         R0,R0,#+0xF        ;; #+0x780000
   \   0000000C   1249               LDR         R1,??main_0+0x4    ;; 0xfffff600
   \   0000000E   0860               STR         R0,[R1, #+0]
   \   00000010   1249               LDR         R1,??main_0+0x8    ;; 0xfffff610
   \   00000012   0860               STR         R0,[R1, #+0]
   \   00000014   1249               LDR         R1,??main_0+0xC    ;; 0xfffff630
   \   00000016   0860               STR         R0,[R1, #+0]
     78          
     79              // Clear the LED's. On the EB55 we must apply a "1" to turn off LEDs
     80                 AT91F_PIO_SetOutput( AT91D_BASE_PIO_LED, AT91B_LED_MASK ) ;
     81              // Clear the LED's. On the EB55 we must apply a "1" to turn off LEDs
     82                 AT91F_PIO_ClearOutput( AT91D_BASE_PIO_LED, AT91B_LED_MASK ) ;
   \   00000018   124C               LDR         R4,??main_0+0x10   ;; 0xfffff634
   \   0000001A   2060               STR         R0,[R4, #+0]
   \   0000001C   124D               LDR         R5,??main_0+0x14   ;; led_mask
     83              // Loop forever
     84              for (;;)
     85              {
     86          
     87                  // Once a Shot on each led
     88          	for ( i=0 ; i < AT91B_NB_LEB ; i++ )
   \                     ??main_1:
   \   0000001E   0026               MOV         R6,#+0
     89                  {
     90          	    AT91F_PIO_ClearOutput( AT91D_BASE_PIO_LED, led_mask[i]) ;
   \                     ??main_2:
   \   00000020   B000               LSL         R0,R6,#+0x2
   \   00000022   2F58               LDR         R7,[R5, R0]
   \   00000024   2760               STR         R7,[R4, #+0]
     91          	    wait();
   \   00000026   ........           BL          wait
     92          	    AT91F_PIO_SetOutput( AT91D_BASE_PIO_LED, led_mask[i] ) ;
   \   0000002A   0D48               LDR         R0,??main_0+0xC    ;; 0xfffff630
   \   0000002C   0760               STR         R7,[R0, #+0]
     93          	    wait();
   \   0000002E   ........           BL          wait
     94                  }// End for
   \   00000032   761C               ADD         R6,R6,#+0x1
   \   00000034   042E               CMP         R6,#+0x4
   \   00000036   F3DB               BLT         ??main_2
     95                  // Once a Shot on each led
     96                  for ( i=(AT91B_NB_LEB-1) ; i >= 0 ; i-- )
   \   00000038   0326               MOV         R6,#+0x3
     97                  {
     98          	    AT91F_PIO_ClearOutput( AT91D_BASE_PIO_LED, led_mask[i]) ;
   \                     ??main_3:
   \   0000003A   B000               LSL         R0,R6,#+0x2
   \   0000003C   2F58               LDR         R7,[R5, R0]
   \   0000003E   2760               STR         R7,[R4, #+0]
     99          	    wait();
   \   00000040   ........           BL          wait
    100          	    AT91F_PIO_SetOutput( AT91D_BASE_PIO_LED, led_mask[i] ) ;
   \   00000044   0648               LDR         R0,??main_0+0xC    ;; 0xfffff630
   \   00000046   0760               STR         R7,[R0, #+0]
    101          	    wait();
   \   00000048   ........           BL          wait
    102                  }
   \   0000004C   761E               SUB         R6,R6,#+0x1
   \   0000004E   E6D4               BMI         ??main_1
   \   00000050   F3E7               B           ??main_3
   \   00000052   C046               NOP         
   \                     ??main_0:
   \   00000054   10FCFFFF           DC32        0xfffffc10
   \   00000058   00F6FFFF           DC32        0xfffff600
   \   0000005C   10F6FFFF           DC32        0xfffff610
   \   00000060   30F6FFFF           DC32        0xfffff630
   \   00000064   34F6FFFF           DC32        0xfffff634
   \   00000068   ........           DC32        led_mask
    103              }// End for
    104          }//* End

   \                                 In segment CODE, align 4, keep-with-next
   \                     ??DataTable1:
   \   00000000   ........           DC32        LedSpeed

   \                                 In segment DATA_ID, align 4, align-sorted
   \                     `?<Initializer for LedSpeed>`:
   \   00000000   00A00500           DC32 368640

   Maximum stack usage in bytes:

     Function     CSTACK
     --------     ------
     change_speed     4
     main            20
     wait             4


   Segment part sizes:

     Function/Label              Bytes
     --------------              -----
     LedSpeed                       4
     led_mask                      16
     change_speed                  68
     wait                          24
     main                         108
     ??DataTable1                   4
     ?<Initializer for LedSpeed>    4
      Others                       36

 
 228 bytes in segment CODE
  16 bytes in segment DATA_C
   4 bytes in segment DATA_I
   4 bytes in segment DATA_ID
  12 bytes in segment INITTAB
 
 204 bytes of CODE  memory (+ 36 bytes shared)
  20 bytes of CONST memory
   4 bytes of DATA  memory

Errors: none
Warnings: none