gapm11.inc

AMI 主板的BIOS源码

;	Input : (BH) device #					;
;		(BL) unit #					;
;		(DS) PM BIOS data segment			;
;		(AL) APM_CONNECTION_INFO			;
;	Output: (CY) 00 for no error				;
;		(CY) 01 for error & error code in (AH) updated	;
;				    in stack.			;
;	Register destroyed : (AH) for error			;
;---------------------------------------------------------------;

check_apm_dev	proc	near

	test	al,[ebp+off_bp_apm]		; is proper APM connection done ?
	jz	short check_apm_dev_00		; no...

;---------------------------------------------------------------;
;			CHECK_APM_DEV_FN0C			;
;---------------------------------------------------------------;
;	Input : (BH) device #					;
;		(BL) unit #					;
;		(DS) PM BIOS data segment			;
;		(AL) APM_CONNECTION_INFO			;
;	Output: (CY) 00 for no error				;
;		(CY) 01 for error & (ah) has error code		;
;	Register destroyed : (AH) for error			;
;---------------------------------------------------------------;

check_apm_dev_fn0c	proc	near

	test	al,apm_bios_power_management_disabled; APM BIOS power management disabled ?
	jnz	short check_apm_dev_01		; yes...
	test	al,apm_bios_active_ver_above_v10; active APM v1.0 ?
	jnz	short check_apm_dev_10		; no...v1.1
	cmp	bh,serial_port_device_id	; valid device ID ?

check_apm_dev_11:
	ja	short check_apm_dev_03		; no...

check_apm_dev_02:
	clc					; set (CY) = 00 for no error
	ret

check_apm_dev_10:
	cmp	bh,pcmcia_socket_device_id	; valid device ID ?
	jmp	short check_apm_dev_11		;

;-----------------------------------------------;

check_apm_dev_00::
	jmp	apm_err_code_03			; interface not connected

check_apm_dev_fn0c	endp
check_apm_dev	endp

;---------------------------------------------------------------;
;			UPDATE_APM_GLOBAL			;
;---------------------------------------------------------------;
;	Input : (DI) pointer to info for the dev		;
;		(DL) to be ANDed to dev state			;
;		(DH) to be ORed to dev state			;
;		(BH) device #					;
;		(BL) unit #, 0ffh means all units		;
;		(CL) # of units for each device			;
;		(CH) APM fn#					;
;	Output: NONE						;
;	Register destroyed : NONE except (AL),(BX),(DI)		;
;---------------------------------------------------------------;

update_apm_global	proc	near

	cmp	bh,system_device_id		; system ?
	jnz	short update_apm_global_00	; no...

	mov	al,no_of_total_dev_v11		; total # of device supported
update_apm_global_01:
	call	cntrl_dev_class			; handle current device
	add	di,no_of_units_for_each_dev	; points to next device
	dec	al				;
	jnz	short update_apm_global_01	;
	ret

update_apm_global_00:
	cmp	bl,0ffh				; all units of the class ?
	jz	short update_apm_global_02	; yes...
	xor	bh,bh				; (bx) = unit #
	and	[di+bx],dl			; clear the required bits
	or	[di+bx],dh			; update required bits
	ret

update_apm_global_02:
	call	cntrl_dev_class			; handle all units for the device
	ret

update_apm_global	endp

;---------------------------------------------------------------;
;			CNTRL_DEV_CLASS				;
;---------------------------------------------------------------;
;	Input : (DI) pointer to info for the dev		;
;		(DL) to be ANDed to dev state			;
;		(DH) to be ORed to dev state			;
;		(CL) # of units for each device			;
;		(CH) APM fn#					;
;	Output: NONE						;
;	Register destroyed : NONE except (BX)			;
;---------------------------------------------------------------;

cntrl_dev_class	proc	near

	push	cx				;
	xor	bx,bx				; start with unit# 00
cntrl_dev_class_06:
	test	byte ptr [di+bx],apm_dev	; APM device ?
	jz	short cntrl_dev_class_04	; no...
	cmp	ch,apm_func_08			; enable/disable power mgt func ?
	jz	short cntrl_dev_class_11	; yes...
	cmp	ch,apm_func_0d			; enable/disable dev power mgt func ?
	jz	short cntrl_dev_class_11	; yes...

;-----------------------------------------------;
;     FOR CHICAGO 'pm_enabled_by_apm' CHECK	;
;	   HAS BEEN REMOVED FOR FN# 0Fh		;
;-----------------------------------------------;
;						;
;	cmp	ch,apm_func_0f			; engage/disengage power mgt ?
;	jz	short cntrl_dev_class_05	; yes...
;	test	byte ptr [di+bx],pm_enabled_by_apm; power mgt enabled by APM for this dev ?
;	jz	short cntrl_dev_class_04	; no...
;						;
;-----------------------------------------------;
;      'pm_enabled_by_apm' CHECK IS BROUGHT	;
;	BACK ON 122895 TO SUPPORT HCT TEST	;
;	FOR APM v1.2 & APPARENTLY IT SEEMS	;
;	WINDOWS 95 HAS CORRECTED THE BUG	;
;-----------------------------------------------;

	test	byte ptr [di+bx],pm_enabled_by_apm; power mgt enabled by APM for this dev ?
	jz	short cntrl_dev_class_04	; no...
	cmp	ch,apm_func_0f			; engage/disengage power mgt ?
	jz	short cntrl_dev_class_05	; yes...

;-----------------------------------------------;

cntrl_dev_class_11:
	test	byte ptr ds:apm_connection_info,apm_bios_active_ver_above_v10; APM v1.0 ?
	jz	short cntrl_dev_class_05	; yes...
	test	byte ptr [di+bx],pm_engaged_by_apm; power mgt engaged ?
	jz	short cntrl_dev_class_04	;
cntrl_dev_class_05:
	and	[di+bx],dl			; clear the required bits
	or	[di+bx],dh			; engage/disengage power management for the unit
cntrl_dev_class_04:
	inc	bx				; next unit#
	dec	cl				; decrement # of units
	jnz	short cntrl_dev_class_06	;
	pop	cx				;
	ret

cntrl_dev_class	endp

;---------------------------------------------------------------;
;			ADD_DEL_V11_APM_DEV			;
;---------------------------------------------------------------;
;	Input : NONE						;
;	Output: NONE						;
;	Register destroyed : (AX),(CX),(DI)			;
;---------------------------------------------------------------;

add_del_v11_apm_dev	proc	near

	mov	di,apm_state			;
	add	di,apm_net_adapter_state	; (di) = pointer to network adapter state
	mov	cx,(no_of_total_dev_v11 - no_of_total_dev_v10) * no_of_units_for_each_dev

	test	byte ptr ds:apm_connection_info,apm_bios_active_ver_above_v10; APM v1.0 ?
	jz	short del_v11_apm_dev		; yes...

;-----------------------------------------------;

	test	byte ptr [di],apm_dev		; is network adapter & pcmcia socket already apm device ?
	jnz	short add_v11_apm_dev_00	; yes...exit

	mov	al,notify_add_v11_apm_dev	; notify chipset specific module for new APM device
	call	css_entry_std			;

add_v11_apm_dev_01:
	or	byte ptr [di],apm_dev or pm_enabled_by_apm or pm_engaged_by_apm
	inc	di				; points to next device/unit
	loop	add_v11_apm_dev_01		;

add_v11_apm_dev_00:
	ret

;-----------------------------------------------;

del_v11_apm_dev:
	test	byte ptr [di],apm_dev		; is network adapter & pcmcia socket already apm device ?
	jz	short del_v11_apm_dev_00	; no...exit

	mov	al,notify_del_v11_apm_dev	; notify chipset specific module for deleting v1.1 APM device
	call	css_entry_std			;

del_v11_apm_dev_01:
	and	byte ptr [di],not (apm_dev or pm_enabled_by_apm or pm_engaged_by_apm)
	inc	di				; points to next device/unit
	loop	del_v11_apm_dev_01		;

del_v11_apm_dev_00:
	ret

add_del_v11_apm_dev	endp

;---------------------------------------------------------------;
;			CSS_ENTRY_STD				;
;---------------------------------------------------------------;
;	Input : (AL) func# to execute				;
;		(DS) PM bios data segment			;
;		(DI) pointer to dev state for some functions	;
;		(DH) device# for some functions			;
;		(DL) unit# for some functions,0ffh for all units;
;		(CL) # of units for each device for some funcs	;
;		(BX) PM event code posted for some function	;
;	Output: (CY) 00 for no error				;
;		(CY) 01 for error				;
;	Register destroyed : NONE except (EAX)			;
;---------------------------------------------------------------;

css_entry_std	proc	near

	pushad					;
	mov	ch,[ebp+off_bp_apm]		; (ch) = info about func called in real/16/32 mode
	call	apm_css_entry			; CHIPSET HOOK HOOK HOOK...execute in APM chipset specific module
	call	get_ebp_for_stack_usage		; (ebp) = current stack pointer
	mov	[ebp+28],eax			; put returned (eax) on stack
	popad					;
	ret

css_entry_std	endp

;---------------------------------------------------------------;
;		   GET_APM_BIOS_PM_STATUS			;
;---------------------------------------------------------------;
;	Input : (DS) PM BIOS data segment			;
;		STACK PRESENT					;
;	Output: (CY) 00 for APM BIOS power management enabled	;
;		(CY) 01 for APM BIOS power management disabled	;
;	Register destroyed : NONE				;
;---------------------------------------------------------------;

get_apm_bios_pm_status	proc	near

;-----------------------------------------------;
;   FOLLOWING PIECE OF CODE HAS BEEN REMOVED	;
;   AND REPLACED BY 'CLC' & 'RET' AS WE ARE	;
;   EXECUTING APM ONLY IF SMI/IRQ BASED POWER	;
;   MANAGEMENT IS ACTIVE, WHICH MEANS IT WILL	;
;   ALWAYS RETURN POWER MANAGEMENT ENABLED.	;
;-----------------------------------------------;

;;	push	ds				;
;;	push	ax				;
;;	push	bios_data_seg			;
;;	pop	ds				; (ds) = bios standard data segment (40H)
;;	mov	al,sys_info			;
;;	and	al,00110000b			; consider bits 5 & 4 only
;;	jz	short get_apm_bios_pm_status_01	; power management disabled
;;	cmp	al,00100000b			; hardware auto power management ?
;;get_apm_bios_pm_status_01:
;;	pop	ax				;
;;	pop	ds				;
;;	stc					; (CY) = 01 for APM BIOS power management disabled
;;	jz	short get_apm_bios_pm_status_00	;
;;	clc					; (CY) = 00 for APM BIOS power management enabled
;;get_apm_bios_pm_status_00:
;;	ret

;-----------------------------------------------;

	clc					; (CY) = 00 for APM BIOS power management enabled
	ret

get_apm_bios_pm_status	endp

;---------------------------------------------------------------;
;			  APM_POST				;
;---------------------------------------------------------------;
;	Input : (DS) PM BIOS data segment			;
;	Output: NONE						;
;	Register destroyed : (AL),(DI)				;
;---------------------------------------------------------------;

apm_post	proc	near

	mov	word ptr ds:apm_bios_ver_no,0101h; set to v1.1

	mov	byte ptr ds:apm_connection_info,00000000b; no APM connection
						; APM BIOS active version set to v1.0

	mov	word ptr ds:pending_apm_event,0000h

;---------------------------------------------------------------;
;			  SET_DEV_STATE				;
;---------------------------------------------------------------;
;	Input : NONE						;
;	Output: NONE						;
;	Register destroyed : (AL),(DI)				;
;---------------------------------------------------------------;

set_dev_state	proc	near

	push	cx				;
	mov	cx,no_of_total_dev_v10 * no_of_units_for_each_dev; (cx) = total # of device info bytes
	mov	di,apm_state			; (di) = APM device state pointer
	mov	al,apm_dev or pm_engaged_by_apm or pm_enabled_by_apm
set_dev_state_00:
	mov	[di],al				; set the device/unit state
	inc	di				; points to next device/unit
	loop	set_dev_state_00		;

	mov	cx,(no_of_total_dev_v11 - no_of_total_dev_v10) * no_of_units_for_each_dev
	test	byte ptr ds:apm_connection_info,apm_bios_active_ver_above_v10; APM v1.0 ?
	jnz	short set_dev_state_01		; no...
	xor	al,al				; clear device state
set_dev_state_01:
	mov	[di],al				; set the device/unit state
	inc	di				; points to next device/unit
	loop	set_dev_state_01		;
	pop	cx				;
	ret
	
set_dev_state	endp
apm_post	endp

;---------------------------------------------------------------;
;*****************************************************************;
;*****************************************************************;
;**								**;
;**	(C)Copyright 1985-1996, American Megatrends Inc.	**;
;**								**;
;**			All Rights Reserved.			**;
;**								**;
;**		6145-F, Northbelt Parkway, Norcross,		**;
;**								**;
;**		Georgia - 30071, USA. Phone-(770)-246-8600.	**;
;**								**;
;*****************************************************************;
;*****************************************************************;
;---------------------------------------------------------------;