gas2.m

元胞自动机的matlab程序。 元胞自动机（CA）是一种用来仿真局部规则和局部联系的方法。典型的元胞自动机是定义在网格上的

%CA driver
%HPP-gas

clear all
clf

nx=52; %must be divisible by 4
ny=100;

z=zeros(nx,ny);
o=ones(nx,ny);
sand = z ;
sandNew = z;
gnd = z ;
diag1 = z;
diag2 = z;
and12 = z;
or12 = z;
sums = z;
orsum = z;

gnd(1:nx,ny-3)=1 ; % right ground line
gnd(1:nx,3)=1 ; % left ground line
gnd(nx/4:nx/2-2,ny/2)=1; %the hole line
gnd(nx/2+2:nx,ny/2)=1; %the hole line
gnd(nx/4, 1:ny) = 1; %top line
gnd(3*nx/4, 1:ny) = 1 ;%bottom line

%fill the left side
r = rand(nx,ny);
sand(nx/4+1:3*nx/4-1, 4:ny/2-1) = r(nx/4+1:3*nx/4-1, 4:ny/2-1)<0.3;
%sand(nx/4+1:3*nx/4-1, ny*.75:ny-4) = r(nx/4+1:3*nx/4-1, ny*.75:ny-4)<0.75;
%sand(nx/2,ny/2) = 1;
%sand(nx/2+1,ny/2+1) = 1;

imh = image(cat(3,z,sand,gnd));
set(imh, 'erasemode', 'none')
axis equal
axis tight
 

for i=1:1000
    p=mod(i,2); %margolis neighborhood
   
    %upper left cell update
    xind = [1+p:2:nx-2+p];
    yind = [1+p:2:ny-2+p];
    
    %See if exactly one diagonal is ones
    %only (at most) one of the following can be true!
    diag1(xind,yind) = (sand(xind,yind)==1) & (sand(xind+1,yind+1)==1) & ...
        (sand(xind+1,yind)==0) & (sand(xind,yind+1)==0);
    
    diag2(xind,yind) = (sand(xind+1,yind)==1) & (sand(xind,yind+1)==1) & ...
        (sand(xind,yind)==0) & (sand(xind+1,yind+1)==0);
    
    %The diagonals both not occupied by two particles
    and12(xind,yind) = (diag1(xind,yind)==0) & (diag2(xind,yind)==0);
    
    %One diagonal is occupied by two particles
    or12(xind,yind)  = diag1(xind,yind) | diag2(xind,yind);
    
    %for every gas particle see if it near the boundary
    sums(xind,yind) = gnd(xind,yind) | gnd(xind+1,yind) | ...
                        gnd(xind,yind+1) | gnd(xind+1,yind+1) ;
    
    % cell layout:
    % x,y    x+1,y
    % x,y+1  x+1,y+1
    %If (no walls) and (diagonals are both not occupied)  
    %then there is no collision, so move opposite cell to current cell
    %If (no walls) and (only one diagonal is occupied) 
    %then there is a collision so move ccw cell to the current cell
    %If (a wall) 
    %then don't change the cell (causes a reflection)
    sandNew(xind,yind) = ...
        (and12(xind,yind)  & ~sums(xind,yind) & sand(xind+1,yind+1)) + ... 
        (or12(xind,yind) & ~sums(xind,yind) & sand(xind,yind+1)) + ...
        (sums(xind,yind) & sand(xind,yind)); 
        
    sandNew(xind+1,yind) = ...
        (and12(xind,yind)  & ~sums(xind,yind) & sand(xind,yind+1)) + ... 
        (or12(xind,yind) & ~sums(xind,yind) & sand(xind,yind))+ ...
        (sums(xind,yind) & sand(xind+1,yind));  
        
    sandNew(xind,yind+1) = ...    
        (and12(xind,yind)  & ~sums(xind,yind) & sand(xind+1,yind)) + ... 
        (or12(xind,yind) & ~sums(xind,yind) & sand(xind+1,yind+1))+ ...
        (sums(xind,yind) & sand(xind,yind+1)); 
        
     sandNew(xind+1,yind+1) = ...    
        (and12(xind,yind)  & ~sums(xind,yind) & sand(xind,yind)) + ... 
        (or12(xind,yind) & ~sums(xind,yind) & sand(xind+1,yind))+ ...
        (sums(xind,yind) & sand(xind+1,yind+1)); 
    
    sand = sandNew;
    
    set(imh, 'cdata', cat(3,z,sand,gnd) )
    drawnow
end