lcd.c

UCOS操作系统在C8051F上移植程序代码

/************************************************************************************
*  Copyright (c) 2004,西安铭朗电子科技有限责任公司
*            All rights reserved.
*
* 文件名称： LCDC_Driver.C
* 文件标识： none
* 适用器件： C8051F020 DMC12864
* 
* 摘 要： 本文件是LCD显示子程序；使用外部22.1184MHz晶振,将跳线器JP8短接,R44空闲
* 
* 当前版本：1.1
* 作 者：刘大伟
* 完成日期：2007年2月1日
*
* 历史版本：1.0
* 作 者：卢 阳
* 完成日期：2004年11月14日
*
* 历史版本：0.9 
* 原作者 ： 李林利
* 完成日期：2004年1月1日
*************************************************************************************/

/*******************************引用外部头文件***************************************/
#include  "..\config\common.h"
#include "lcd.h"
#include <INTRINS.H>
#include <math.h>
/************************************************************************************/

/*********************************全局变量*******************************************/
unsigned int  xdata  addr;
unsigned char xdata  *tp;


/*--  文字:  铭  --*/
/*--  楷体_GB231224;  此字体下对应的点阵为：宽x高=32x33   --*/
C_BYTE  WLib_ming_32x32[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xF8,0xF8,0x78,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0xC0,0xFC,0x78,0x38,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0xC0,0xF0,0xF8,0xDE,0xCF,0xC7,0x66,0x66,0x66,0x67,0x02,0x30,
0x38,0x3C,0x7E,0xE7,0xC3,0xC3,0xE3,0xF3,0x7F,0x1F,0x0F,0x07,0x02,0x00,0x00,0x00,
0x00,0x06,0x03,0x11,0x10,0x18,0x18,0x18,0xFF,0xFF,0x1F,0x0C,0x4C,0x6C,0x64,0x30,
0x38,0xFC,0xFC,0x3F,0x37,0x33,0x31,0x30,0x18,0x18,0xF8,0xF8,0x70,0x30,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x3F,0x3F,0x1E,0x0E,0x07,0x03,0x01,0x00,
0x00,0x0F,0x3F,0x1C,0x0C,0x0C,0x0C,0x06,0x06,0x07,0x07,0x07,0x00,0x00,0x00,0x00,
0x54,0x2B,0xDC,0x00,0x54,0x2B,0xDC,0x00,0x20,0x00,0x00,0x00,0x32,0x30,0x30,0x34,
0x2D,0x39,0x2D,0x31,0x30,0x20,0x31,0x36,0x3A,0x34,0x36,0x3A,0x20,0x00,0x00,0x00
};
/*--  文字:  朗  --*/
/*--  楷体_GB231224;  此字体下对应的点阵为：宽x高=32x33   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=39x33  --*/
C_BYTE  WLib_lang_32x32[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x18,0x38,0xF8,0xB0,0x00,0x00,
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x06,0xFE,0xFE,0x36,0x32,0x33,0x33,0xC3,0xFF,0xFF,0x07,
0x00,0x01,0xFF,0xFF,0x61,0x61,0x61,0x21,0x01,0xFF,0xFF,0x01,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xC0,0xFF,0xFF,0xC3,0xC3,0xE3,0x6B,0x3B,0x7B,0x70,0x00,
0xC0,0xF8,0x7F,0x0F,0x0C,0x0C,0x0C,0x04,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x07,0x0F,0x07,0x03,0x01,0x00,0x20,0x20,0x30,0x18,0x0C,0x0F,
0x07,0x01,0x00,0x00,0x00,0x04,0x0C,0x1C,0x7C,0x7F,0x1F,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
/*--  文字:  科  --*/
/*--  楷体_GB231224;  此字体下对应的点阵为：宽x高=32x33   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=39x33  --*/
C_BYTE  WLib_ke_32x32[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,0xE0,0x70,0x78,0x70,0x20,
0x00,0x00,0x00,0x00,0x00,0x04,0x7C,0xFC,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x40,0xC0,0xE0,0xE0,0xE1,0x61,0x61,0xF1,0xF0,0xFF,0xFF,0xB8,0x98,0x98,0x18,
0x00,0x11,0x33,0x73,0x67,0x02,0x00,0xFF,0xFF,0x00,0x00,0x80,0x80,0x80,0x80,0x00,
0x00,0x80,0xC0,0x60,0x70,0x38,0x1C,0x0F,0x07,0x83,0xFF,0xFF,0x01,0x03,0x03,0x0C,
0x0C,0x0C,0x0E,0x06,0x06,0x06,0x06,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x03,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};

/*--  文字:  技  --*/
/*--  楷体_GB231224;  此字体下对应的点阵为：宽x高=32x33   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=39x33  --*/
C_BYTE  WLib_ji_32x32[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0xFC,0xFC,0x18,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x8C,0xFC,0xFC,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x10,0x18,0x18,0x18,0x18,0x18,0xFF,0xFF,0x8C,0x8C,0x0C,0x00,0x0C,0x0C,
0x0C,0x8C,0xFF,0xFF,0x87,0xC7,0xC7,0xC3,0x83,0x03,0x00,0x00,0x00,0x00,0x00,0x00,
0x30,0x70,0x70,0x70,0x38,0x1C,0x0C,0x0E,0xFF,0xFF,0x01,0x00,0x00,0x01,0x0F,0x0F,
0x1B,0xB1,0xF1,0xF1,0xFD,0xDF,0x8F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x04,0x0C,0x1C,0x3E,0x3F,0x0F,0x00,0x08,0x0C,0x0C,0x06,0x06,
0x03,0x03,0x01,0x00,0x00,0x01,0x03,0x07,0x0F,0x1E,0x1E,0x1C,0x1C,0x1C,0x18,0x08,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};

/*--  文字:  W  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=10x8   --*/
C_BYTE  WLib_W_10x8[]={
0x02,0x0e,0x70,0xc2,0x3e,0x32,0xc0,0x72,0x0e,0x02
};
/*--  文字:  M  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=9x8   --*/
C_BYTE  WLib_M_9x8[]={
0x82,0xfe,0x8e,0x70,0x80,0x70,0x8e,0xfe,0x82
};
/*--  文字:  L  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=6x8   --*/
C_BYTE  WLib_L_6x8[]={
0x82,0xfe,0x82,0x80,0xc0,0x00
};
/*--  文字:  A  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=7x8   --*/
C_BYTE  WLib_A_7x8[]={
0x80,0xe0,0xbc,0x22,0x3c,0xe0,0x80
};
/*--  文字:  R  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=7x8   --*/
C_BYTE  WLib_R_7x8[]={

0x82,0xFe,0x92,0x32,0x52,0x8c,0x80
};
/*--  文字:  C  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=7x8   --*/
C_BYTE  WLib_C_7x8[]={
0x00,0x7c,0x82,0x82,0x84,0x46,0x00
};
/*--  文字:  O  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=7x8   --*/
C_BYTE  WLib_O_7x8[]={
0x00,0x7c,0x82,0x82,0x82,0x7c,0x00
};
/*--  文字:  .  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=4x8   --*/
C_BYTE  WLib_dot_4x8[]={
0x00,0xc0,0xc0,0x00
};
/*--  文字:  T  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_T_6x8[]={
0x00,0x06,0x82,0xfe,0x82,0x06
};
/*--  文字:  e  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_e_5x8[]={
0x00,0x70,0xa8,0xa8,0xb0
};
/*--  文字:  l  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_l_4x8[]={
0x00,0x82,0xfe,0x80
};
/*--  文字:  :  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_ddot_3x8[]={
0x00,0x6c,0x6c
};
/*--  文字:  -  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_line_6x8[]={
0x00,0x10,0x10,0x10,0x10,0x10
};
/*--  文字:  1  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=4x8   --*/
C_BYTE  WLib_1_4x8[]={
0x00,0x84,0xFe,0x80
};

/*--  文字:  2  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_2_5x8[]={
0x00,0xc4,0xa2,0x92,0x8c
};

/*--  文字:  3  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_3_5x8[]={
0x00,0x44,0x92,0x92,0x6c
};

/*--  文字:  4  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=6x8   --*/
C_BYTE  WLib_4_6x8[]={
0x00,0x30,0x28,0x24,0xfe,0x20
};

/*--  文字:  5  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_5_5x8[]={
0x00,0x4e,0x8a,0x8a,0x72
};

/*--  文字:  6  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=6x8   --*/
C_BYTE  WLib_6_5x8[]={
0x00,0x7c,0x92,0x92,0x60
};

/*--  文字:  7  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_7_5x8[]={
0x00,0x02,0xf2,0x0a,0x06
};

/*--  文字:  8  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_8_5x8[]={
0x00,0x6c,0x92,0x92,0x6c
};

/*--  文字:  9  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_9_5x8[]={
0x00,0x0c,0x92,0x92,0x7c
};

/*--  文字:  0  --*/
/*--  Times New Roman8;  此字体下对应的点阵为：宽x高=5x8   --*/
C_BYTE  WLib_0_5x8[]={
0x00,0x7c,0x82,0x82,0x7c
};

/***********************************************************************************
* 函数名称：dis_start0;
*
* 函数功能描述：显示开机界面"铭朗科技www.mlarm.com"及电话;
*              
* 输入参数：none;
*
* 返回数据：none；
*
* 注意：    none;
************************************************************************************/

void  dis_start0(void)
{
	LCDC_DispWord (0,   32, WLib_ming_32x32, 4, 32, 1);
	LCDC_DispWord (32,  32, WLib_lang_32x32, 4, 32, 1);
	LCDC_DispWord (64,  32, WLib_ke_32x32,   4, 32, 1);
	LCDC_DispWord (96,  32, WLib_ji_32x32,   4, 32, 1);

	LCDC_DispWord (8,   16, WLib_W_10x8,  1, 10, 1);
	LCDC_DispWord (19,  16, WLib_W_10x8,  1, 10, 1);
	LCDC_DispWord (30,  16, WLib_W_10x8,  1, 10, 1);
	LCDC_DispWord (46,  16, WLib_M_9x8,	  1, 9,  1);
	LCDC_DispWord (57,  16, WLib_L_6x8,   1, 6,  1);
	LCDC_DispWord (63,  16, WLib_A_7x8,   1, 7,  1);
	LCDC_DispWord (71,  16, WLib_R_7x8,   1, 7,  1);
	LCDC_DispWord (79,  16, WLib_M_9x8,   1, 9,  1);
	LCDC_DispWord (90,  16, WLib_dot_4x8, 1, 4,  1);
	LCDC_DispWord (94,  16, WLib_C_7x8,   1, 7,  1);
	LCDC_DispWord (102, 16, WLib_O_7x8,   1, 7,  1);
    LCDC_DispWord (110, 16, WLib_M_9x8,   1, 9,  1);

	LCDC_DispWord (11,  2, WLib_T_6x8,    1, 6,  1);
	LCDC_DispWord (17,  2, WLib_e_5x8,    1, 5,  1);
	LCDC_DispWord (22,  2, WLib_l_4x8,    1, 4,  1);
	LCDC_DispWord (27,  2, WLib_ddot_3x8, 1, 3,  1);

	LCDC_DispWord (34,  2, WLib_0_5x8,    1, 5,  1);
	LCDC_DispWord (39,  2, WLib_2_5x8,    1, 5,  1);
	LCDC_DispWord (44,  2, WLib_9_5x8,    1, 5,  1);
	LCDC_DispWord (49,  2, WLib_line_6x8, 1, 6,  1);
	LCDC_DispWord (55,  2, WLib_8_5x8,    1, 5,  1);
	LCDC_DispWord (60,  2, WLib_8_5x8,    1, 5,  1);
	LCDC_DispWord (65,  2, WLib_2_5x8,    1, 5,  1);
	LCDC_DispWord (70,  2, WLib_2_5x8,    1, 5,  1);
	LCDC_DispWord (75,  2, WLib_3_5x8,    1, 5,  1);
	LCDC_DispWord (80,  2, WLib_5_5x8,    1, 5,  1);
	LCDC_DispWord (85,  2, WLib_9_5x8,    1, 5,  1);
	LCDC_DispWord (90,  2, WLib_7_5x8,    1, 5,  1);
	LCDC_DispWord (95,  2, WLib_line_6x8, 1, 6,  1);
	LCDC_DispWord (101, 2, WLib_8_5x8,    1, 5,  1);
	LCDC_DispWord (106, 2, WLib_0_5x8,    1, 5,  1);
	LCDC_DispWord (111, 2, WLib_2_5x8,    1, 5,  1);
}

/***********************************************************************************
* 函数名称：LCDC_Init;
*
* 函数功能描述：lcd_init;
*              
* 输入参数：none;
*
* 返回数据：none；
*
* 注意：    具体Lcd操作请参考DMC12864.PDF;
************************************************************************************/
void LCDC_Init (void)                                           
  {
	DISABLE_INTERRUPTS;		//关中断
	addr = Lcd_Cs     | 
		   Lcd_CsChip | 
		   Lcd_WrCmd;		//写命令 （参考Lcd_Driver.h文件宏定义）
	LCDC_WrCmd (Lcd_Dsl);	//Display start line
	LCDC_WrCmd (St_Addr);	//COLOUM ADDRESS
	LCDC_WrCmd (St_Page);	//ROW ADDRESS
	LCDC_WrCmd (Dis_ON );	//Display ON