fsl_pkg_netlists.net

ADS_FSL_LIBRARY

		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  top_1in_1out:PKG1 n1 n2 n3 _net10 _net20 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n3 n4 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_top_1in_1out
;****************************************************************
define FSL_MET_MODEL_top_2in_1out (n1 n2 n3 n4)
parameters File="test" RTH=-1 TSNK=-1 CTH=-1 \
	Fo=1.0 CGPAD=0.0 CDPAD=0.0 \
	Cpad=0.0 Lpad=0.0 Rpad=0.0 Ccoup=0.0 \
	Lg1=0.0 Qg1=1000 RDCG1=0.0 \
	Ld1=0.0 Qd1=1000 RDCD1=0.0 \
	Lg2=0.0 Qg2=1000 RDCG2=0.0 \
	Lg3=0.0 Qg3=1000 RDCG3=0.0 \
	Ld2=0.0 Qd2=1000 RDCD2=0.0 \
	Cin1=0.0 Cin2=0.0 Cout=0.0 \
	KMUT1=0.0 KMUT2=0.0 Kcoup=0.0 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  top_2in_1out:PKG1 n1 n2 n3 _net10 _net20 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n3 n4 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_top_2in_1out
;****************************************************************
define FSL_MET_MODEL_top_2in_2out (n1 n2 n3 n4)
parameters File="test" RTH=-1 TSNK=-1 CTH=-1 \
	Fo=1.0 CGPAD=0.0 CDPAD=0.0 \
	Cpad=0.0 Lpad=0.0 Rpad=0.0 Ccoup=0.0 \
	Lg1=0.0 Qg1=1000 RDCG1=0.0 \
	Ld1=0.0 Qd1=1000 RDCD1=0.0 \
	Lg2=0.0 Qg2=1000 RDCG2=0.0 \
	Lg3=0.0 Qg3=1000 RDCG3=0.0 \
	Ld2=0.0 Qd2=1000 RDCD2=0.0 \
	Cin1=0.0 Cin2=0.0 Cout=0.0 \
	KMUT1=0.0 KMUT2=0.0 Kcoup=0.0 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  top_2in_2out:PKG1 n1 n2 n3 _net10 _net20 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n3 n4 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_top_2in_2out
;****************************************************************
define FSL_MET_MODEL_top_3in_2out (n1 n2 n3 n4)
parameters File="test" RTH=-1 TSNK=-1 CTH=-1 \
	Fo=1.0 CGPAD=0.0 CDPAD=0.0 \
	Cpad=0.0 Lpad=0.0 Rpad=0.0 Ccoup=0.0 \
	Lg1=0.0 Qg1=1000 RDCG1=0.0 \
	Ld1=0.0 Qd1=1000 RDCD1=0.0 \
	Lg2=0.0 Qg2=1000 RDCG2=0.0 \
	Lg3=0.0 Qg3=1000 RDCG3=0.0 \
	Ld2=0.0 Qd2=1000 RDCD2=0.0 \
	Cin1=0.0 Cin2=0.0 Cout=0.0 \
	KMUT1=0.0 KMUT2=0.0 Kcoup=0.0 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  top_3in_2out:PKG1 n1 n2 n3 _net10 _net20 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n3 n4 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_top_3in_2out
;****************************************************************
define FSL_MET_MODEL_push_pull_185 (n1 n2 n3 n4 n5 n6 n7)
parameters File="test" RTH=-1 TSNK=-1 CTH=-1 \
	Fo=1.0 CGPAD=0.0 CDPAD=0.0 \
	Cpad=0.0 Lpad=0.0 Rpad=0.0 Ccoup=0.0 \
	Lg1=0.0 Qg1=1000 RDCG1=0.0 \
	Ld1=0.0 Qd1=1000 RDCD1=0.0 \
	Lg2=0.0 Qg2=1000 RDCG2=0.0 \
	Lg3=0.0 Qg3=1000 RDCG3=0.0 \
	Ld2=0.0 Qd2=1000 RDCD2=0.0 \
	Cin1=0.0 Cin2=0.0 Cout=0.0 \
	KMUT1=0.0 KMUT2=0.0 Kcoup=0.0 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  push_pull_185:PKG1 n1 n2 n3 n4 n5 _net10 _net20 _net15 _net25 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n5 n6 File=File TSNK=TSNK RTH=RTH CTH=CTH
  METMOS_FSL_ext:MRF2 _net15 _net25 n5 n7 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_push_pull_185
;****************************************************************
define FSL_MET_MODEL_push_pull_9180 (n1 n2 n3 n4 n5 n6 n7)
parameters File="test" RTH=-1 TSNK=-1 CTH=-1 \
	Fo=1.0 CGPAD=0.0 CDPAD=0.0 \
	Cpad=0.0 Lpad=0.0 Rpad=0.0 Ccoup=0.0 \
	Lg1=0.0 Qg1=1000 RDCG1=0.0 \
	Ld1=0.0 Qd1=1000 RDCD1=0.0 \
	Lg2=0.0 Qg2=1000 RDCG2=0.0 \
	Lg3=0.0 Qg3=1000 RDCG3=0.0 \
	Ld2=0.0 Qd2=1000 RDCD2=0.0 \
	Cin1=0.0 Cin2=0.0 Cout=0.0 \
	KMUT1=0.0 KMUT2=0.0 Kcoup=0.0 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  push_pull_9180:PKG1 n1 n2 n3 n4 n5 _net10 _net20 _net15 _net25 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n5 n6 File=File TSNK=TSNK RTH=RTH CTH=CTH
  METMOS_FSL_ext:MRF2 _net15 _net25 n5 n7 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_push_pull_9180
;****************************************************************
define FSL_MET_MODEL_push_pull_120 (n1 n2 n3 n4 n5 n6 n7)
parameters File="test" RTH=-1 TSNK=-1 CTH=-1 \
	Fo=1.0 CGPAD=0.0 CDPAD=0.0 \
	Cpad=0.0 Lpad=0.0 Rpad=0.0 Ccoup=0.0 \
	Lg1=0.0 Qg1=1000 RDCG1=0.0 \
	Ld1=0.0 Qd1=1000 RDCD1=0.0 \
	Lg2=0.0 Qg2=1000 RDCG2=0.0 \
	Lg3=0.0 Qg3=1000 RDCG3=0.0 \
	Ld2=0.0 Qd2=1000 RDCD2=0.0 \
	Cin1=0.0 Cin2=0.0 Cout=0.0 \
	KMUT1=0.0 KMUT2=0.0 Kcoup=0.0 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-8 I_AbsTol=1e-8 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes

  push_pull_120:PKG1 n1 n2 n3 n4 n5 _net10 _net20 _net15 _net25 \
	Fo=Fo CGPAD=CGPAD CDPAD=CDPAD \
	Cpad=Cpad Lpad=Lpad Rpad=Rpad Ccoup=Ccoup \
	Lg1=Lg1 Qg1=Qg1 RDCG1=RDCG1 \
	Ld1=Ld1 Qd1=Qd1 RDCD1=RDCD1 \
	Lg2=Lg2 Qg2=Qg2 RDCG2=RDCG2 \
	Lg3=Lg3 Qg3=Qg3 RDCG3=RDCG3 \
	Ld2=Ld2 Qd2=Qd2 RDCD2=RDCD2 \
	Cin1=Cin1 Cin2=Cin2 Cout=Cout \
	KMUT1=KMUT1 KMUT2=KMUT2 Kcoup=Kcoup 
  METMOS_FSL_ext:MRF1 _net10 _net20 n5 n6 File=File TSNK=TSNK RTH=RTH CTH=CTH
  METMOS_FSL_ext:MRF2 _net15 _net25 n5 n7 File=File TSNK=TSNK RTH=RTH CTH=CTH
;
end FSL_MET_MODEL_push_pull_120
;****************************************************************
;****************************************************************
define FSL_ROOT_MODEL_sparm_s4p (n1 n2 n3)
parameters File="test" Periphery=10 mm Fingers=10 \
	Sparm_File="test.s4p" \
 	Number_of_Die=1 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-7 I_AbsTol=1e-7 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes
sparm_s4p:snp1 n1 n2 _net1001 _net2001  Filename=Sparm_File
Die_Periph = if(Number_of_Die<1) then 1 else (Periphery/Number_of_Die) endif
Die_Fing = if(Number_of_Die<1) then 1 else (Fingers/Number_of_Die) endif

   model HPFETM_X HP_FET File=File
   HPFETM_X:HPFET_1 _net2001  _net1001 n3 Wtot=Die_Periph N=int(Die_Fing)
;
end FSL_ROOT_MODEL_sparm_s4p
;****************************************************************
define FSL_ROOT_MODEL_sparm_s6pS (n1 n2 n3)
parameters File="test" Periphery=10 mm Fingers=10 \
	Sparm_File="test.s4p" \
 	Number_of_Die=1 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-7 I_AbsTol=1e-7 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes
sparm_s6p:snp1 n1 n2 _net1001 _net2001 _net3001 n3 Filename=Sparm_File
Die_Periph = if(Number_of_Die<1) then 1 else (Periphery/Number_of_Die) endif
Die_Fing = if(Number_of_Die<1) then 1 else (Fingers/Number_of_Die) endif

   model HPFETM_X HP_FET File=File
   HPFETM_X:HPFET_1 _net2001  _net1001 _net3001 Wtot=Die_Periph N=int(Die_Fing)
;
end FSL_ROOT_MODEL_sparm_s6pS
;****************************************************************
define FSL_ROOT_MODEL_sparm_s7pS (n1 n2 n3)
parameters File="test" Periphery=10 mm Fingers=10 \
	Sparm_File="test.s4p" \
 	Number_of_Die=1 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-7 I_AbsTol=1e-7 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes
sparm_s7p:snp1 n1 n2 _net1001 _net1002 _net2001 _net2002 _net3001 n3 Filename=Sparm_File
Die_Periph = if(Number_of_Die<2) then 2 else (Periphery/Number_of_Die) endif
Die_Fing = if(Number_of_Die<2) then 2 else (Fingers/Number_of_Die) endif

   model HPFETM_X HP_FET File=File
   HPFETM_X:HPFET_1 _net2001  _net1001 _net3001 Wtot=Die_Periph N=int(Die_Fing)
   HPFETM_X:HPFET_2 _net2002  _net1002 _net3001 Wtot=Die_Periph N=int(Die_Fing)
;
end FSL_ROOT_MODEL_sparm_s7pS
;****************************************************************
define FSL_ROOT_MODEL_sparm_s9pS (n1 n2 n3)
parameters File="test" Periphery=10 mm Fingers=10 \
	Sparm_File="test.s4p" \
 	Number_of_Die=1 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-7 I_AbsTol=1e-7 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes
sparm_s9p:snp1 n1 n2 _net1001 _net1002 _net1003 _net2001 _net2002 _net2003 _net3001 n3 Filename=Sparm_File
Die_Periph = if(Number_of_Die<3) then 3 else (Periphery/Number_of_Die) endif
Die_Fing = if(Number_of_Die<3) then 3 else (Fingers/Number_of_Die) endif

   model HPFETM_X HP_FET File=File
   HPFETM_X:HPFET_1 _net2001  _net1001 _net3001 Wtot=Die_Periph N=int(Die_Fing)
   HPFETM_X:HPFET_2 _net2002  _net1002 _net3001 Wtot=Die_Periph N=int(Die_Fing)
   HPFETM_X:HPFET_3 _net2003  _net1003 _net3001 Wtot=Die_Periph N=int(Die_Fing)
;
end FSL_ROOT_MODEL_sparm_s9pS
;****************************************************************
define FSL_ROOT_MODEL_sparm_s4p_pp (n1 n2 n3 n4 n5)
parameters File="test" Periphery=10 mm Fingers=10 \
	Sparm_File="test.s4p" \
 	Number_of_Die=2 
; options block for easier DC convergence
	Options:Options_MRF1  Temp=25 TopologyCheck=no \
		ForceS_Params=no MaxSpectralSize=512 \
	     	V_RelTol=1e-6 V_AbsTol=1e-6 \
	     	I_RelTol=1e-7 I_AbsTol=1e-7 \
	    	GiveAllWarnings=no MaxWarnings=10 \
	    	ForceM_Params=yes
sparm_s4p_pp:snp1 n1 n2 n3 n4 _net1001 _net1002 _net2001  _net2002  Filename=Sparm_File
Die_Periph = if(Number_of_Die<1) then 1 else (Periphery/Number_of_Die) endif
Die_Fing = if(Number_of_Die<1) then 1 else (Fingers/Number_of_Die) endif

   model HPFETM_X HP_FET File=File
   HPFETM_X:HPFET_1 _net2001  _net1001 n5 Wtot=Die_Periph N=int(Die_Fing)
   HPFETM_X:HPFET_2 _net2002  _net1002 n5 Wtot=Die_Periph N=int(Die_Fing)
;
end FSL_ROOT_MODEL_sparm_s4p_pp
;****************************************************************
define FSL_ROOT_MODEL_sparm_s6p_pp (n1 n2 n3 n4 n5)
parameters File="test" Periphery=10 mm Fingers=10 \
	Sparm_File="test.s6p" \
 	Number_of_Die=4