events.h

基于Freescale Codewarrior6.2环境下的针对qe8 单片机的LM75A温度传感器的驱动程序,可以直接使用

/** ###################################################################
**     Filename  : Events.H
**     Project   : LM75A
**     Processor : MC9S08QE8CFM
**     Beantype  : Events
**     Version   : Driver 01.02
**     Compiler  : CodeWarrior HCS08 C Compiler
**     Date/Time : 2009-1-13, 15:18
**     Abstract  :
**         This is user's event module.
**         Put your event handler code here.
**     Settings  :
**     Contents  :
**         I2C1_OnReceiveData  - void I2C1_OnReceiveData(void);
**         I2C1_OnTransmitData - void I2C1_OnTransmitData(void);
**
**     (c) Copyright UNIS, spol. s r.o. 1997-2008
**     UNIS, spol. s r.o.
**     Jundrovska 33
**     624 00 Brno
**     Czech Republic
**     http      : www.processorexpert.com
**     mail      : [e-mail]
** ###################################################################*/

#ifndef __Events_H
#define __Events_H
/* MODULE Events */

#include "PE_Types.h"
#include "PE_Error.h"
#include "PE_Const.h"
#include "IO_Map.h"
#include "I2C1.h"

void I2C1_OnReceiveData(void);
/*
** ===================================================================
**     Event       :  I2C1_OnReceiveData (module Events)
**
**     From bean   :  I2C1 [InternalI2C]
**     Description :
**         This event is invoked when I2C finishes the reception of
**         the data successfully. This event is not available for
**         the SLAVE mode and if both RecvChar and RecvBlock are
**         disabled. This event is enabled only if interrupts/events
**         are enabled.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/

void I2C1_OnTransmitData(void);
/*
** ===================================================================
**     Event       :  I2C1_OnTransmitData (module Events)
**
**     From bean   :  I2C1 [InternalI2C]
**     Description :
**         This event is invoked when I2C finishes the transmission
**         of the data successfully. This event is not available for
**         the SLAVE mode and if both SendChar and SendBlock are
**         disabled. This event is enabled only if interrupts/events
**         are enabled.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/


/* END Events */
#endif /* __Events_H*/

/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 3.03 [04.07]
**     for the Freescale HCS08 series of microcontrollers.
**
** ###################################################################
*/