⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 net1080.c

📁 omap3 linux 2.6 用nocc去除了冗余代码
💻 C
字号:
/* * Net1080 based USB host-to-host cables * Copyright (C) 2000-2005 by David Brownell * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */// #define	DEBUG			// error path messages, extra info// #define	VERBOSE			// more; success messages#include <linux/module.h>#include <linux/init.h>#include <linux/netdevice.h>#include <linux/etherdevice.h>#include <linux/ethtool.h>#include <linux/workqueue.h>#include <linux/mii.h>#include <linux/usb.h>#include <asm/unaligned.h>#include "usbnet.h"/* * Netchip 1080 driver ... http://www.netchip.com * (Sept 2004:  End-of-life announcement has been sent.) * Used in (some) LapLink cables */#define frame_errors	data[1]/* * NetChip framing of ethernet packets, supporting additional error * checks for links that may drop bulk packets from inside messages. * Odd USB length == always short read for last usb packet. *	- nc_header *	- Ethernet header (14 bytes) *	- payload *	- (optional padding byte, if needed so length becomes odd) *	- nc_trailer * * This framing is to be avoided for non-NetChip devices. */struct nc_header {		// packed:	__le16	hdr_len;		// sizeof nc_header (LE, all)	__le16	packet_len;		// payload size (including ethhdr)	__le16	packet_id;		// detects dropped packets#define MIN_HEADER	6	// all else is optional, and must start with:	// __le16	vendorId;	// from usb-if	// __le16	productId;} __attribute__((__packed__));#define	PAD_BYTE	((unsigned char)0xAC)struct nc_trailer {	__le16	packet_id;} __attribute__((__packed__));// packets may use FLAG_FRAMING_NC and optional pad#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \				+ sizeof (struct ethhdr) \				+ (mtu) \				+ 1 \				+ sizeof (struct nc_trailer))#define MIN_FRAMED	FRAMED_SIZE(0)/* packets _could_ be up to 64KB... */#define NC_MAX_PACKET	32767/* * Zero means no timeout; else, how long a 64 byte bulk packet may be queued * before the hardware drops it.  If that's done, the driver will need to * frame network packets to guard against the dropped USB packets.  The win32 * driver sets this for both sides of the link. */#define	NC_READ_TTL_MS	((u8)255)	// ms/* * We ignore most registers and EEPROM contents. */#define	REG_USBCTL	((u8)0x04)#define REG_TTL		((u8)0x10)#define REG_STATUS	((u8)0x11)/* * Vendor specific requests to read/write data */#define	REQUEST_REGISTER	((u8)0x10)#define	REQUEST_EEPROM		((u8)0x11)static intnc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr){	int status = usb_control_msg(dev->udev,		usb_rcvctrlpipe(dev->udev, 0),		req,		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,		0, regnum,		retval_ptr, sizeof *retval_ptr,		USB_CTRL_GET_TIMEOUT);	if (status > 0)		status = 0;	if (!status)		le16_to_cpus(retval_ptr);	return status;}static inline intnc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr){	return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);}// no retval ... can become async, usable in_interrupt()static voidnc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value){	usb_control_msg(dev->udev,		usb_sndctrlpipe(dev->udev, 0),		req,		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,		value, regnum,		NULL, 0,			// data is in setup packet		USB_CTRL_SET_TIMEOUT);}static inline voidnc_register_write(struct usbnet *dev, u8 regnum, u16 value){	nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);}/*-------------------------------------------------------------------------*//* * Control register */#define	USBCTL_WRITABLE_MASK	0x1f0f// bits 15-13 reserved, r/o#define	USBCTL_ENABLE_LANG	(1 << 12)#define	USBCTL_ENABLE_MFGR	(1 << 11)#define	USBCTL_ENABLE_PROD	(1 << 10)#define	USBCTL_ENABLE_SERIAL	(1 << 9)#define	USBCTL_ENABLE_DEFAULTS	(1 << 8)// bits 7-4 reserved, r/o#define	USBCTL_FLUSH_OTHER	(1 << 3)#define	USBCTL_FLUSH_THIS	(1 << 2)#define	USBCTL_DISCONN_OTHER	(1 << 1)#define	USBCTL_DISCONN_THIS	(1 << 0)static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl){	if (!netif_msg_link(dev))		return;	devdbg(dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"			" this%s%s;"			" other%s%s; r/o 0x%x",		dev->udev->bus->bus_name, dev->udev->devpath,		usbctl,		(usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",		(usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",		(usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",		(usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",		(usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",		(usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",		(usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",		(usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",		(usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",		usbctl & ~USBCTL_WRITABLE_MASK		);}/*-------------------------------------------------------------------------*//* * Status register */#define	STATUS_PORT_A		(1 << 15)#define	STATUS_CONN_OTHER	(1 << 14)#define	STATUS_SUSPEND_OTHER	(1 << 13)#define	STATUS_MAILBOX_OTHER	(1 << 12)#define	STATUS_PACKETS_OTHER(n)	(((n) >> 8) & 0x03)#define	STATUS_CONN_THIS	(1 << 6)#define	STATUS_SUSPEND_THIS	(1 << 5)#define	STATUS_MAILBOX_THIS	(1 << 4)#define	STATUS_PACKETS_THIS(n)	(((n) >> 0) & 0x03)#define	STATUS_UNSPEC_MASK	0x0c8c#define	STATUS_NOISE_MASK 	((u16)~(0x0303|STATUS_UNSPEC_MASK))static inline void nc_dump_status(struct usbnet *dev, u16 status){	if (!netif_msg_link(dev))		return;	devdbg(dev, "net1080 %s-%s status 0x%x:"			" this (%c) PKT=%d%s%s%s;"			" other PKT=%d%s%s%s; unspec 0x%x",		dev->udev->bus->bus_name, dev->udev->devpath,		status,		// XXX the packet counts don't seem right		// (1 at reset, not 0); maybe UNSPEC too		(status & STATUS_PORT_A) ? 'A' : 'B',		STATUS_PACKETS_THIS(status),		(status & STATUS_CONN_THIS) ? " CON" : "",		(status & STATUS_SUSPEND_THIS) ? " SUS" : "",		(status & STATUS_MAILBOX_THIS) ? " MBOX" : "",		STATUS_PACKETS_OTHER(status),		(status & STATUS_CONN_OTHER) ? " CON" : "",		(status & STATUS_SUSPEND_OTHER) ? " SUS" : "",		(status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",		status & STATUS_UNSPEC_MASK		);}/*-------------------------------------------------------------------------*//* * TTL register */#define	TTL_THIS(ttl)	(0x00ff & ttl)#define	TTL_OTHER(ttl)	(0x00ff & (ttl >> 8))#define MK_TTL(this,other)	((u16)(((other)<<8)|(0x00ff&(this))))static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl){	if (netif_msg_link(dev))		devdbg(dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",			dev->udev->bus->bus_name, dev->udev->devpath,			ttl, TTL_THIS(ttl), TTL_OTHER(ttl));}/*-------------------------------------------------------------------------*/static int net1080_reset(struct usbnet *dev){	u16		usbctl, status, ttl;	u16		*vp = kmalloc(sizeof (u16), GFP_KERNEL);	int		retval;	if (!vp)		return -ENOMEM;	// nc_dump_registers(dev);	if ((retval = nc_register_read(dev, REG_STATUS, vp)) < 0) {		dbg("can't read %s-%s status: %d",			dev->udev->bus->bus_name, dev->udev->devpath, retval);		goto done;	}	status = *vp;	nc_dump_status(dev, status);	if ((retval = nc_register_read(dev, REG_USBCTL, vp)) < 0) {		dbg("can't read USBCTL, %d", retval);		goto done;	}	usbctl = *vp;	nc_dump_usbctl(dev, usbctl);	nc_register_write(dev, REG_USBCTL,			USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);	if ((retval = nc_register_read(dev, REG_TTL, vp)) < 0) {		dbg("can't read TTL, %d", retval);		goto done;	}	ttl = *vp;	// nc_dump_ttl(dev, ttl);	nc_register_write(dev, REG_TTL,			MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );	dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);	if (netif_msg_link(dev))		devinfo(dev, "port %c, peer %sconnected",			(status & STATUS_PORT_A) ? 'A' : 'B',			(status & STATUS_CONN_OTHER) ? "" : "dis"			);	retval = 0;done:	kfree(vp);	return retval;}static int net1080_check_connect(struct usbnet *dev){	int			retval;	u16			status;	u16			*vp = kmalloc(sizeof (u16), GFP_KERNEL);	if (!vp)		return -ENOMEM;	retval = nc_register_read(dev, REG_STATUS, vp);	status = *vp;	kfree(vp);	if (retval != 0) {		dbg("%s net1080_check_conn read - %d", dev->net->name, retval);		return retval;	}	if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)		return -ENOLINK;	return 0;}static void nc_flush_complete(struct urb *urb){	kfree(urb->context);	usb_free_urb(urb);}static void nc_ensure_sync(struct usbnet *dev){	dev->frame_errors++;	if (dev->frame_errors > 5) {		struct urb		*urb;		struct usb_ctrlrequest	*req;		int			status;		/* Send a flush */		urb = usb_alloc_urb(0, GFP_ATOMIC);		if (!urb)			return;		req = kmalloc(sizeof *req, GFP_ATOMIC);		if (!req) {			usb_free_urb(urb);			return;		}		req->bRequestType = USB_DIR_OUT			| USB_TYPE_VENDOR			| USB_RECIP_DEVICE;		req->bRequest = REQUEST_REGISTER;		req->wValue = cpu_to_le16(USBCTL_FLUSH_THIS				| USBCTL_FLUSH_OTHER);		req->wIndex = cpu_to_le16(REG_USBCTL);		req->wLength = cpu_to_le16(0);		/* queue an async control request, we don't need		 * to do anything when it finishes except clean up.		 */		usb_fill_control_urb(urb, dev->udev,			usb_sndctrlpipe(dev->udev, 0),			(unsigned char *) req,			NULL, 0,			nc_flush_complete, req);		status = usb_submit_urb(urb, GFP_ATOMIC);		if (status) {			kfree(req);			usb_free_urb(urb);			return;		}		if (netif_msg_rx_err(dev))			devdbg(dev, "flush net1080; too many framing errors");		dev->frame_errors = 0;	}}static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb){	struct nc_header	*header;	struct nc_trailer	*trailer;	u16			hdr_len, packet_len;	if (!(skb->len & 0x01)) {		dev->stats.rx_frame_errors++;		nc_ensure_sync(dev);		return 0;	}	header = (struct nc_header *) skb->data;	hdr_len = le16_to_cpup(&header->hdr_len);	packet_len = le16_to_cpup(&header->packet_len);	if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {		dev->stats.rx_frame_errors++;		dbg("packet too big, %d", packet_len);		nc_ensure_sync(dev);		return 0;	} else if (hdr_len < MIN_HEADER) {		dev->stats.rx_frame_errors++;		dbg("header too short, %d", hdr_len);		nc_ensure_sync(dev);		return 0;	} else if (hdr_len > MIN_HEADER) {		// out of band data for us?		dbg("header OOB, %d bytes", hdr_len - MIN_HEADER);		nc_ensure_sync(dev);		// switch (vendor/product ids) { ... }	}	skb_pull(skb, hdr_len);	trailer = (struct nc_trailer *)		(skb->data + skb->len - sizeof *trailer);	skb_trim(skb, skb->len - sizeof *trailer);	if ((packet_len & 0x01) == 0) {		if (skb->data [packet_len] != PAD_BYTE) {			dev->stats.rx_frame_errors++;			dbg("bad pad");			return 0;		}		skb_trim(skb, skb->len - 1);	}	if (skb->len != packet_len) {		dev->stats.rx_frame_errors++;		dbg("bad packet len %d (expected %d)",			skb->len, packet_len);		nc_ensure_sync(dev);		return 0;	}	if (header->packet_id != get_unaligned(&trailer->packet_id)) {		dev->stats.rx_fifo_errors++;		dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",			le16_to_cpu(header->packet_id),			le16_to_cpu(trailer->packet_id));		return 0;	}	dev->frame_errors = 0;	return 1;}static struct sk_buff *net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags){	struct sk_buff		*skb2;	struct nc_header	*header = NULL;	struct nc_trailer	*trailer = NULL;	int			padlen = sizeof (struct nc_trailer);	int			len = skb->len;	if (!((len + padlen + sizeof (struct nc_header)) & 0x01))		padlen++;	if (!skb_cloned(skb)) {		int	headroom = skb_headroom(skb);		int	tailroom = skb_tailroom(skb);		if (padlen <= tailroom &&		    sizeof(struct nc_header) <= headroom)			/* There's enough head and tail room */			goto encapsulate;		if ((sizeof (struct nc_header) + padlen) <				(headroom + tailroom)) {			/* There's enough total room, so just readjust */			skb->data = memmove(skb->head						+ sizeof (struct nc_header),					    skb->data, skb->len);			skb_set_tail_pointer(skb, len);			goto encapsulate;		}	}	/* Create a new skb to use with the correct size */	skb2 = skb_copy_expand(skb,				sizeof (struct nc_header),				padlen,				flags);	dev_kfree_skb_any(skb);	if (!skb2)		return skb2;	skb = skb2;encapsulate:	/* header first */	header = (struct nc_header *) skb_push(skb, sizeof *header);	header->hdr_len = cpu_to_le16(sizeof (*header));	header->packet_len = cpu_to_le16(len);	header->packet_id = cpu_to_le16((u16)dev->xid++);	/* maybe pad; then trailer */	if (!((skb->len + sizeof *trailer) & 0x01))		*skb_put(skb, 1) = PAD_BYTE;	trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);	put_unaligned(header->packet_id, &trailer->packet_id);	return skb;}static int net1080_bind(struct usbnet *dev, struct usb_interface *intf){	unsigned	extra = sizeof (struct nc_header)				+ 1				+ sizeof (struct nc_trailer);	dev->net->hard_header_len += extra;	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;	dev->hard_mtu = NC_MAX_PACKET;	return usbnet_get_endpoints (dev, intf);}static const struct driver_info	net1080_info = {	.description =	"NetChip TurboCONNECT",	.flags =	FLAG_FRAMING_NC,	.bind =		net1080_bind,	.reset =	net1080_reset,	.check_connect = net1080_check_connect,	.rx_fixup =	net1080_rx_fixup,	.tx_fixup =	net1080_tx_fixup,};static const struct usb_device_id	products [] = {{	USB_DEVICE(0x0525, 0x1080),	// NetChip ref design	.driver_info =	(unsigned long) &net1080_info,}, {	USB_DEVICE(0x06D0, 0x0622),	// Laplink Gold	.driver_info =	(unsigned long) &net1080_info,},	{ },		// END};MODULE_DEVICE_TABLE(usb, products);static struct usb_driver net1080_driver = {	.name =		"net1080",	.id_table =	products,	.probe =	usbnet_probe,	.disconnect =	usbnet_disconnect,	.suspend =	usbnet_suspend,	.resume =	usbnet_resume,};static int __init net1080_init(void){ 	return usb_register(&net1080_driver);}module_init(net1080_init);static void __exit net1080_exit(void){ 	usb_deregister(&net1080_driver);}module_exit(net1080_exit);MODULE_AUTHOR("David Brownell");MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");MODULE_LICENSE("GPL");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -