readme.txt

str73系列 三洋LC75010 控制代码

/******************** (C) COPYRIGHT 2005 STMicroelectronics **********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 09/27/2005 :  V1.0
* Description        : Description of the GPIO example
**********************************************************************************
* History:
* 09/27/2005 :  V1.0
*********************************************************************************
 THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
 CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
 AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
 OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
 OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
 CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
**********************************************************************************

Example description
===================
This example guides the user to :
- configure GPIO4 as output push-pull
- write on the GPIO4 port

It is made of 3 steps :
1) GPIO4 configuration in output push-pull mode to use STR73x-Eval board's leds

2) Drive leds connected to the GPIO4 pins:
    - Set led connected to PIN0
    - Reset led connected to PIN0
    - Set GPIO4 LSB
    - Set GPIO4 MSB
    - Reset all GPIO4 pins
    - Set all GPIO4 pins

3) Make a loop on all GPIO4 connected leds
   - Set  GPIO4 pins one by one in a sequence. 

Directory contents
==================
73x_conf.h  Library Configuration file
73x_it.c    Interrupt handlers
main.c      Main program

How to use it
=============
In order to make the program work, you must do the following :
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 73x_lib.c
  + 73x_cfg.c
  + 73x_gpio.c
- Link all compiled files and load your image into either RAM or Flash
- Run the example
- Check the toggling of GPIO4 pins.

******************* (C) COPYRIGHT 2005 STMicroelectronics *****END OF FILE****