kconfig

V4l driver for DVB HD

	select VIDEO_SAA7146_VV
	select VIDEO_TUNER
	---help---
	  This is a video4linux driver for the 'Multimedia eXtension Board'
	  TV card by Siemens-Nixdorf.

	  To compile this driver as a module, choose M here: the
	  module will be called mxb.

config VIDEO_DPC
	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
	depends on PCI && VIDEO_V4L1
	select VIDEO_SAA7146_VV
	select VIDEO_V4L2
	---help---
	  This is a video4linux driver for the 'dpc7146 demonstration
	  board' by Philips-Semiconductors. It's the reference design
	  for SAA7146 bases boards, so if you have some unsupported
	  saa7146 based, analog video card, chances are good that it
	  will work with this skeleton driver.

	  To compile this driver as a module, choose M here: the
	  module will be called dpc7146.

config VIDEO_HEXIUM_ORION
	tristate "Hexium HV-PCI6 and Orion frame grabber"
	depends on PCI && VIDEO_V4L1
	select VIDEO_SAA7146_VV
	select VIDEO_V4L2
	---help---
	  This is a video4linux driver for the Hexium HV-PCI6 and
	  Orion frame grabber cards by Hexium.

	  To compile this driver as a module, choose M here: the
	  module will be called hexium_orion.

config VIDEO_HEXIUM_GEMINI
	tristate "Hexium Gemini frame grabber"
	depends on PCI && VIDEO_V4L1
	select VIDEO_SAA7146_VV
	select VIDEO_V4L2
	---help---
	  This is a video4linux driver for the Hexium Gemini frame
	  grabber card by Hexium. Please note that the Gemini Dual
	  card is *not* fully supported.

	  To compile this driver as a module, choose M here: the
	  module will be called hexium_gemini.

source "drivers/media/video/cx88/Kconfig"

config VIDEO_OVCAMCHIP
	tristate "OmniVision Camera Chip support"
	depends on I2C && VIDEO_V4L1
	---help---
	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
	  This driver is intended to be used with the ov511 and w9968cf USB
	  camera drivers.

	  To compile this driver as a module, choose M here: the
	  module will be called ovcamchip.

config VIDEO_M32R_AR
	tristate "AR devices"
	depends on M32R && VIDEO_V4L1
	---help---
	  This is a video4linux driver for the Renesas AR (Artificial Retina)
	  camera module.

config VIDEO_M32R_AR_M64278
	tristate "Use Colour AR module M64278(VGA)"
	depends on VIDEO_M32R_AR && PLAT_M32700UT
	---help---
	  Say Y here to use the Renesas M64278E-800 camera module,
	  which supports VGA(640x480 pixcels) size of images.

#
# Encoder / Decoder module configuration
#

menu "Encoders and Decoders"
	depends on VIDEO_DEV

config VIDEO_MSP3400
	tristate "Micronas MSP34xx audio decoders"
	depends on VIDEO_DEV && I2C
	---help---
	  Support for the Micronas MSP34xx series of audio decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called msp3400.

config VIDEO_CS53L32A
	tristate "Cirrus Logic CS53L32A audio ADC"
	depends on VIDEO_DEV && I2C && EXPERIMENTAL
	---help---
	  Support for the Cirrus Logic CS53L32A low voltage
	  stereo A/D converter.

	  To compile this driver as a module, choose M here: the
	  module will be called cs53l32a.

config VIDEO_WM8775
	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
	depends on VIDEO_DEV && I2C && EXPERIMENTAL
	---help---
	  Support for the Wolfson Microelectronics WM8775 high
	  performance stereo A/D Converter with a 4 channel input mixer.

	  To compile this driver as a module, choose M here: the
	  module will be called wm8775.

config VIDEO_WM8739
	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
	depends on VIDEO_DEV && I2C && EXPERIMENTAL
	---help---
	  Support for the Wolfson Microelectronics WM8739
	  stereo A/D Converter.

	  To compile this driver as a module, choose M here: the
	  module will be called wm8739.

source "drivers/media/video/cx25840/Kconfig"

config VIDEO_SAA711X
	tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
	depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
	---help---
	  Old support for the Philips SAA7113/4 video decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called saa7115.

config VIDEO_SAA7127
	tristate "Philips SAA7127/9 digital video encoders"
	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
	---help---
	  Support for the Philips SAA7127/9 digital video encoders.

	  To compile this driver as a module, choose M here: the
	  module will be called saa7127.

config VIDEO_UPD64031A
	tristate "NEC Electronics uPD64031A Ghost Reduction"
	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
	---help---
	  Support for the NEC Electronics uPD64031A Ghost Reduction
	  video chip. It is most often found in NTSC TV cards made for
	  Japan and is used to reduce the 'ghosting' effect that can
	  be present in analog TV broadcasts.

	  To compile this driver as a module, choose M here: the
	  module will be called upd64031a.

config VIDEO_UPD64083
	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
	---help---
	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
	  separation video chip. It is used to improve the quality of
	  the colors of a composite signal.

	  To compile this driver as a module, choose M here: the
	  module will be called upd64083.

endmenu # encoder / decoder chips

#
# USB Multimedia device configuration
#

menu "V4L USB devices"
	depends on USB && VIDEO_DEV

source "drivers/media/video/pvrusb2/Kconfig"

source "drivers/media/video/em28xx/Kconfig"

config USB_DSBR
	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called dsbr100.

source "drivers/media/video/usbvideo/Kconfig"

source "drivers/media/video/et61x251/Kconfig"

config USB_OV511
	tristate "USB OV511 Camera support"
	depends on USB && VIDEO_V4L1
	---help---
	  Say Y here if you want to connect this type of camera to your
	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
	  for more information and for a list of supported cameras.

	  To compile this driver as a module, choose M here: the
	  module will be called ov511.

config USB_SE401
	tristate "USB SE401 Camera support"
	depends on USB && VIDEO_V4L1
	---help---
	  Say Y here if you want to connect this type of camera to your
	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
	  for more information and for a list of supported cameras.

	  To compile this driver as a module, choose M here: the
	  module will be called se401.

source "drivers/media/video/sn9c102/Kconfig"

config USB_STV680
	tristate "USB STV680 (Pencam) Camera support"
	depends on USB && VIDEO_V4L1
	---help---
	  Say Y here if you want to connect this type of camera to your
	  computer's USB port. This includes the Pencam line of cameras.
	  See <file:Documentation/video4linux/stv680.txt> for more information
	  and for a list of supported cameras.

	  To compile this driver as a module, choose M here: the
	  module will be called stv680.

config USB_W9968CF
	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
	depends on USB && VIDEO_V4L1 && I2C
	select VIDEO_OVCAMCHIP
	---help---
	  Say Y here if you want support for cameras based on OV681 or
	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.

	  This driver has an optional plugin, which is distributed as a
	  separate module only (released under GPL). It allows to use higher
	  resolutions and framerates, but cannot be included in the official
	  Linux kernel for performance purposes.

	  See <file:Documentation/video4linux/w9968cf.txt> for more info.

	  To compile this driver as a module, choose M here: the
	  module will be called w9968cf.

source "drivers/media/video/zc0301/Kconfig"

source "drivers/media/video/pwc/Kconfig"

endmenu # V4L USB devices

endmenu