hw_config.c

STM32下做的usb转RS232程序

/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : hw_config.c
* Author             : MCD Application Team
* Version            : V1.0
* Date               : 10/08/2007
* Description        : Hardware Configuration & Setup
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_it.h"
#include "usb_lib.h"
#include "usb_prop.h"
#include "usb_desc.h"
#include "hw_config.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
USART_InitTypeDef USART_InitStructure;
ErrorStatus HSEStartUpStatus;

/* Extern variables ----------------------------------------------------------*/
u8 buffer_in[VIRTUAL_COM_PORT_DATA_SIZE];
extern u32 count_in;
extern LINE_CODING linecoding;

/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name  : Set_System
* Description    : Configures Main system clocks & power
* Input          : None.
* Return         : None.
*******************************************************************************/
void Set_System(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration -----------------------------*/   
  /* RCC system reset(for debug purpose) */
  RCC_DeInit();

   RCC_HSEConfig(RCC_HSE_OFF);
RCC_HSICmd(ENABLE);

    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1);    //Configures the AHB clock(HCLK).
  
    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1); //Configures the High Speed APB clock (PCLK2).

    /* PCLK1 = HCLK/4 */
    RCC_PCLK1Config(RCC_HCLK_Div4);     //Configures the Low Speed APB clock (PCLK1).

    /* Flash 2 wait state */
    FLASH_SetLatency(FLASH_Latency_2);
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);

    /* PLLCLK = 8MHz /2* 12 = 48 MHz */
   
    RCC_PLLConfig(RCC_PLLSource_HSI_Div2, RCC_PLLMul_12);
    /* Enable PLL */ 
    RCC_PLLCmd(ENABLE);

    /* Wait till PLL is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
    {
    }

    /* Select PLL as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);

    /* Wait till PLL is used as system clock source */
    while(RCC_GetSYSCLKSource() != 0x08)
    {
    }


  /* Enable GPIOA, GPIOD and USART1 clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOD 
                        | RCC_APB2Periph_USART1, ENABLE);

  /* PD.2 used as USB pull-up */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
  
  /* Configure USART1 Rx (PA.10) as input floating */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIOA, &GPIO_InitStructure);

  /* Configure USART1 Tx (PA.09) as alternate function push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_Init(GPIOA, &GPIO_InitStructure);
}

/*******************************************************************************
* Function Name  : Set_USBClock
* Description    : Configures USB Clock input (48MHz)
* Input          : None.
* Return         : None.
*******************************************************************************/
void Set_USBClock(void)
{
   /* Select USBCLK source PLL/1=48MHz*/
  RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1);

  /* Enable USB clock */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE);
}

/*******************************************************************************
* Function Name  : Enter_LowPowerMode
* Description    : Power-off system clocks and power while entering suspend mode
* Input          : None.
* Return         : None.
*******************************************************************************/
void Enter_LowPowerMode(void)
{
}

/*******************************************************************************
* Function Name  : Leave_LowPowerMode
* Description    : Restores system clocks and power while exiting suspend mode
* Input          : None.
* Return         : None.
*******************************************************************************/
void Leave_LowPowerMode(void)
{
}

/*******************************************************************************
* Function Name  : USB_Interrupts_Config
* Description    : Configures the USB interrupts
* Input          : None.
* Return         : None.
*******************************************************************************/
void USB_Interrupts_Config(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;

#ifdef  VECT_TAB_RAM
  /* Set the Vector Table base location at 0x20000000 */
  NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#else  /* VECT_TAB_FLASH */
  /* Set the Vector Table base location at 0x08000000 */
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
#endif

  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);

  NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN_RX0_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  /* Enable USART1 Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_Init(&NVIC_InitStructure);
}

/*******************************************************************************
* Function Name  : USB_Cable_Config
* Description    : Software Connection/Disconnection of USB Cable
* Input          : None.
* Return         : Status
*******************************************************************************/
void USB_Cable_Config (FunctionalState NewState)
{
  if (NewState != DISABLE)
  {
    GPIO_ResetBits(GPIOD, GPIO_Pin_2);
  }
  else
  {
    GPIO_SetBits(GPIOD, GPIO_Pin_2);
  }
}

/*******************************************************************************
* Function Name  :  UART0_Config_Default.
* Description    :  configure the UART 0 with default values.
* Input          :  None.
* Return         :  None.
*******************************************************************************/
void USART_Config_Default(void)
{
  /* USART1 default configuration */
  /* USART1 configured as follow:
        - BaudRate = 9600 baud  
        - Word Length = 8 Bits
        - One Stop Bit
        - Parity Odd
        - Hardware flow control desabled
        - Receive and transmit enabled
        - USART Clock disabled
        - USART CPOL: Clock is active low
        - USART CPHA: Data is captured on the second edge 
        - USART LastBit: The clock pulse of the last data bit is not output to 
                         the SCLK pin
  */
  USART_InitStructure.USART_BaudRate = 9600;
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;
  USART_InitStructure.USART_StopBits = USART_StopBits_1;
  USART_InitStructure.USART_Parity = USART_Parity_Odd;
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
  USART_InitStructure.USART_Clock = USART_Clock_Disable;
  USART_InitStructure.USART_CPOL = USART_CPOL_Low;
  USART_InitStructure.USART_CPHA = USART_CPHA_2Edge;
  USART_InitStructure.USART_LastBit = USART_LastBit_Disable;

  /* Configure the USART1 */
  USART_Init(USART1, &USART_InitStructure);

  /* Enable the USART Receive interrupt */
  USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
}

/*******************************************************************************
* Function Name  :  UART0_Config.
* Description    :  Configure the UART 0 according to the linecoding structure.
* Input          :  None.
* Return         :  Configuration status
                    TRUE : configuration done with success
                    FALSE : configuration aborted.
*******************************************************************************/
bool USART_Config(void)
{
  /* set the bit rate*/
  if ((linecoding.bitrate > 115200) || (linecoding.bitrate < 1200) )
  {
    USART_Config_Default();
    return (FALSE);
  }

  /* set the Stop bit*/
  switch (linecoding.format)
  {
    case 0:
      USART_InitStructure.USART_StopBits = USART_StopBits_1;
      break;
    case 1:
      USART_InitStructure.USART_StopBits = USART_StopBits_1_5;
      break;
    case 2:
      USART_InitStructure.USART_StopBits = USART_StopBits_2;
      break;
    default :
    {
      USART_Config_Default();
      return (FALSE);
    }
  }

  /* set the parity bit*/
  switch (linecoding.paritytype)
  {
    case 0:
      USART_InitStructure.USART_Parity = USART_Parity_No;
      break;
    case 1:
      USART_InitStructure.USART_Parity = USART_Parity_Even;
      break;
    case 2:
      USART_InitStructure.USART_Parity = USART_Parity_Odd;
      break;
    default :
    {
      USART_Config_Default();
      return (FALSE);
    }
  }

  /*set the data type : only 8bits and 9bits is supported */
  switch (linecoding.datatype)
  {
    case 0x07:
      USART_InitStructure.USART_WordLength = USART_WordLength_8b;
      break;
    case 0x08:
      USART_InitStructure.USART_WordLength = USART_WordLength_9b;
      break;
    default :
    {
      USART_Config_Default();
      return (FALSE);
    }
  }

  USART_InitStructure.USART_BaudRate = linecoding.bitrate;
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
  USART_Init(USART1, &USART_InitStructure);
  USART_Cmd(USART1, ENABLE);
  return (TRUE);
}

/*******************************************************************************
* Function Name  : USB_To_UART_Send_Data.
* Description    : send the received data from USB to the UART 0.
* Input          : data_buffer: data address.
                   Nb_bytes: number of bytes to send.
* Return         : none.
*******************************************************************************/
void USB_To_USART_Send_Data(u8* data_buffer, u8 Nb_bytes)
{
  u32 i;

  for (i = 0; i < Nb_bytes; i++)
  {
    USART_SendData(USART1, *(data_buffer + i));
    while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);/* ADD */
  }
}

/*******************************************************************************
* Function Name  : UART_To_USB_Send_Data.
* Description    : send the received data from UART 0 to USB.
* Input          : None.
* Return         : none.
*******************************************************************************/
void USART_To_USB_Send_Data(void)
{
  if (USART_InitStructure.USART_WordLength == USART_WordLength_8b)
  {
    buffer_in[count_in] = USART_ReceiveData(USART1) & 0x7F;
  }
  else if (USART_InitStructure.USART_WordLength == USART_WordLength_9b)
  {
    buffer_in[count_in] = USART_ReceiveData(USART1);
  }
  count_in++;
  UserToPMABufferCopy(buffer_in, ENDP1_TXADDR, count_in);
  SetEPTxCount(ENDP1, count_in);
  SetEPTxValid(ENDP1);
}

/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/