makefile.in

MPI stands for the Message Passing Interface. Written by the MPI Forum (a large committee comprising

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

ompi_config.h: stamp-h3
	@if test ! -f $@; then \
	  rm -f stamp-h3; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h3; \
	else :; fi

stamp-h3: $(srcdir)/ompi_config.h.in $(top_builddir)/config.status
	@rm -f stamp-h3
	cd $(top_builddir) && $(SHELL) ./config.status ompi/include/ompi_config.h
$(srcdir)/ompi_config.h.in:  $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h3
	touch $@

mpi.h: stamp-h4
	@if test ! -f $@; then \
	  rm -f stamp-h4; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h4; \
	else :; fi

stamp-h4: $(srcdir)/mpi.h.in $(top_builddir)/config.status
	@rm -f stamp-h4
	cd $(top_builddir) && $(SHELL) ./config.status ompi/include/mpi.h

distclean-hdr:
	-rm -f ompi_config.h stamp-h3 mpi.h stamp-h4
mpif.h: $(top_builddir)/config.status $(srcdir)/mpif.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mpif-config.h: $(top_builddir)/config.status $(srcdir)/mpif-config.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
	@list='$(include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
	done
install-nobase_dist_ompiHEADERS: $(nobase_dist_ompi_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(ompidir)" || $(MKDIR_P) "$(DESTDIR)$(ompidir)"
	@$(am__vpath_adj_setup) \
	list='$(nobase_dist_ompi_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__vpath_adj) \
	  echo " $(nobase_dist_ompiHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(ompidir)/$$f'"; \
	  $(nobase_dist_ompiHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(ompidir)/$$f"; \
	done

uninstall-nobase_dist_ompiHEADERS:
	@$(NORMAL_UNINSTALL)
	@$(am__vpath_adj_setup) \
	list='$(nobase_dist_ompi_HEADERS)'; for p in $$list; do \
	  $(am__vpath_adj) \
	  echo " rm -f '$(DESTDIR)$(ompidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(ompidir)/$$f"; \
	done
install-nobase_nodist_ompiHEADERS: $(nobase_nodist_ompi_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(ompidir)" || $(MKDIR_P) "$(DESTDIR)$(ompidir)"
	@$(am__vpath_adj_setup) \
	list='$(nobase_nodist_ompi_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__vpath_adj) \
	  echo " $(nobase_nodist_ompiHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(ompidir)/$$f'"; \
	  $(nobase_nodist_ompiHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(ompidir)/$$f"; \
	done

uninstall-nobase_nodist_ompiHEADERS:
	@$(NORMAL_UNINSTALL)
	@$(am__vpath_adj_setup) \
	list='$(nobase_nodist_ompi_HEADERS)'; for p in $$list; do \
	  $(am__vpath_adj) \
	  echo " rm -f '$(DESTDIR)$(ompidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(ompidir)/$$f"; \
	done
install-nodist_includeHEADERS: $(nodist_include_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
	@list='$(nodist_include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
	  $(nodist_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
	done

uninstall-nodist_includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_include_HEADERS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES) ompi_config.h.in mpi.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS) ompi_config.h.in mpi.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES) ompi_config.h.in mpi.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS) ompi_config.h.in mpi.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(HEADERS) ompi_config.h mpi.h
installdirs:
	for dir in "$(DESTDIR)$(includedir)" "$(DESTDIR)$(ompidir)" "$(DESTDIR)$(ompidir)" "$(DESTDIR)$(includedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-includeHEADERS \
	install-nobase_dist_ompiHEADERS \
	install-nobase_nodist_ompiHEADERS \
	install-nodist_includeHEADERS

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-includeHEADERS \
	uninstall-nobase_dist_ompiHEADERS \
	uninstall-nobase_nodist_ompiHEADERS \
	uninstall-nodist_includeHEADERS

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-libtool ctags distclean distclean-generic distclean-hdr \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am \
	install-includeHEADERS install-info install-info-am \
	install-man install-nobase_dist_ompiHEADERS \
	install-nobase_nodist_ompiHEADERS \
	install-nodist_includeHEADERS install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
	uninstall-am uninstall-includeHEADERS \
	uninstall-nobase_dist_ompiHEADERS \
	uninstall-nobase_nodist_ompiHEADERS \
	uninstall-nodist_includeHEADERS

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: