5045.h

来自「x5045三线制总线读写程序,通过keil C验证OK!」· C头文件 代码 · 共 42 行

#include <reg51.h>

sbit SPI_SO=	P1^3;
sbit SPI_SI=	P1^2;
sbit SPI_SCK=	P1^1;
sbit SPI_CS=	P1^0;


//sbit SO=	P1^3;
//sbit SI=	P1^2;
//sbit SK=	P1^1;
//sbit CS=	P1^0;

//25045可编程看门狗监控EEPROM指令集
#define WREN 0x06 	// 00000110 //设置写使能锁存器（允许写操作)
#define WRDI 0x04 	// 00000100 //复位写使能锁存器（禁止写操作）
#define RDSR 0x05 	// 00000101 //读状态寄存器
#define WRSR 0x01	// 00000001 //写状态寄存器（块锁定）
#define READ 0x03	// 00000011 //从开始于所选地址的存储器列阵中读出数据
#define WRTE 0x02	// 00000010 //把数据写入开始于所选地址的存储器阵列中（1至4字节）

void delay (unsigned char n);
void in_byte(unsigned char BYT);
unsigned char out_byte(void);
unsigned char rdsr_dog(void);
void wrsr_dog(unsigned char status_reg);
unsigned char wip_poll(void);
void wrdi_dog(void);
void rest_dog(void);
void wren_dog(void);
unsigned char byte_read(unsigned char H,unsigned char L);
void byte_write(unsigned char H,unsigned char L,unsigned char D);
//void page_read(unsigned char H,unsigned char L,unsigned char D);
//void page_write(unsigned char H,unsigned char L,unsigned char D);

/*void Write1B(unsigned char cData,unsigned char cAddress,bit bRegion);
unsigned char Read1B(unsigned char cAddress,bit bRegion);
unsigned char ReadSR();
unsigned char WriteSR(unsigned char cData);
void Write8(unsigned char cData);
unsigned char Read8();