t4_2.fit

eda技术的相关资料

-- MAX+plus II Compiler Fit File      
-- Version 9.3 7/23/1999              
-- Compiled: 01/10/2000 17:19:22      

-- Copyright (C) 1988-1999 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "t4_2"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "CLK"                          : INPUT_PIN  = 43     ;
    "RESET"                        : INPUT_PIN  = 42     ;
    "A"                            : OUTPUT_PIN = 71     ;
    "B"                            : OUTPUT_PIN = 7      ;
    "C"                            : OUTPUT_PIN = 69     ;
    "D"                            : OUTPUT_PIN = 70     ;
    "E"                            : OUTPUT_PIN = 72     ;
    "F"                            : OUTPUT_PIN = 73     ;
    "G"                            : OUTPUT_PIN = 19     ;
    "SEL0"                         : OUTPUT_PIN = 17     ;
    "SEL1"                         : OUTPUT_PIN = 16     ;
    "SEL2"                         : OUTPUT_PIN = 18     ;
    "|DELED:8|:132"                : LOCATION   = LC2_A2 ;
    "|DELED:8|:227"                : LOCATION   = LC1_A3 ;
    "|DELED:8|:229"                : LOCATION   = LC8_A5 ;
    "|DELED:8|:245"                : LOCATION   = LC5_A6 ;
    "|DELED:8|~245~1"              : LOCATION   = LC5_A2 ;
    "|DELED:8|:260"                : LOCATION   = LC3_A2 ;
    "|DELED:8|~260~1"              : LOCATION   = LC1_A2 ;
    "|DELED:8|:262"                : LOCATION   = LC2_A4 ;
    "|DELED:8|:264"                : LOCATION   = LC1_A1 ;
    "|DELED:8|:266"                : LOCATION   = LC7_A1 ;
    "|DELED:8|~266~1"              : LOCATION   = LC4_A2 ;
    "|74161:3|f74161:sub|:9"       : LOCATION   = LC3_A1 ;  -- |74161:3|f74161:sub|QA
    "|74161:3|f74161:sub|:87"      : LOCATION   = LC1_A8 ;  -- |74161:3|f74161:sub|QB
    "|74161:3|f74161:sub|:99"      : LOCATION   = LC5_A7 ;  -- |74161:3|f74161:sub|QC
    "|74161:3|f74161:sub|:110"     : LOCATION   = LC1_A9 ;  -- |74161:3|f74161:sub|QD

END;

INTERNAL_INFO "t4_2"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD5P43  : LORAX = "1:FB5->LC3_A1,->LC1_A8,->LC5_A7,->LC1_A9|";
    LC1_A3  : LORAX = "1:MSW0R0C2,V0C2->OV0C2P7|";
    LC8_A5  : LORAX = "1:MSW7R0C4,G75R0->OH7R0P69|";
    LC5_A6  : LORAX = "1:MSW4R0C5,G77R0->OH4R0P70|";
    LC3_A2  : LORAX = "1:MSW3R0C0,G21R0->OH3R0P71|";
    LC2_A4  : LORAX = "1:MSW2R0C2,G14R0->OH2R0P72|";
    LC1_A1  : LORAX = "1:MSW0R0C0,G39R0->OH0R0P73|";
    LC7_A1  : LORAX = "1:MSW6R0C0,HHL29R0->OH14R0P19|";
    OD3P42  : LORAX = "1:FB3->LC3_A1,->LC1_A8,->LC5_A7,->LC1_A9|";
    LC3_A1  : LORAX = "1:MSW2R0C0,HHL3R0->OH10R0P17|2:PA19R0C6->LC5_A7|,2:PA19R0C7->LC1_A8|,2:PA19R0C8->LC1_A9|,2:PA19R0C1->LC2_A2,->LC5_A2,->LC1_A2,->LC4_A2|,2:PA19R0C2->LC1_A3|,2:PA19R0C3->LC2_A4|,2:PA19R0C4->LC8_A5|,2:PA19R0C5->LC5_A6||";
    LC1_A8  : LORAX = "1:MSW0R0C7,HHL23R0->OH8R0P16,2:PA1R0C6->LC5_A7|,2:PA1R0C8->LC1_A9|,2:PA1R0C0->LC1_A1,->LC7_A1|,2:PA1R0C1->LC2_A2,->LC5_A2,->LC1_A2,->LC4_A2|,2:PA1R0C2->LC1_A3|,2:PA1R0C3->LC2_A4|,2:PA1R0C4->LC8_A5|,2:PA1R0C5->LC5_A6||";
    LC5_A7  : LORAX = "1:MSW4R0C6,HHL41R0->OH12R0P18|2:PA8R0C8->LC1_A9|,2:PA8R0C0->LC1_A1,->LC7_A1|,2:PA8R0C1->LC2_A2,->LC5_A2,->LC1_A2,->LC4_A2|,2:PA8R0C2->LC1_A3|,2:PA8R0C3->LC2_A4|,2:PA8R0C4->LC8_A5|,2:PA8R0C5->LC5_A6||";
    LC1_A9  : LORAX = "1:MSW0R0C8,HHL21R0|2:PA15R0C0->LC1_A1,->LC7_A1|,2:PA15R0C1->LC2_A2,->LC5_A2,->LC1_A2,->LC4_A2|,2:PA15R0C2->LC1_A3|,2:PA15R0C3->LC2_A4|,2:PA15R0C4->LC8_A5|,2:PA15R0C5->LC5_A6||";
	LC2_A2  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC1_A3  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC8_A5  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC5_A2  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC5_A6  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC1_A2  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC3_A2  : LORAX2 = "LC2_A2, LC4_A2, LC1_A2, LC5_A2";
	LC2_A4  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC1_A1  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC4_A2  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC7_A1  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
	LC3_A1  : LORAX2 = "X, X, X, LC3_A1";
	LC1_A8  : LORAX2 = "X, X, LC1_A8, LC3_A1";
	LC5_A7  : LORAX2 = "X, LC1_A8, LC5_A7, LC3_A1";
	LC1_A9  : LORAX2 = "LC1_A8, LC1_A9, LC5_A7, LC3_A1";
END;