123.c

汉字点阵16X128源程序,与PC联机代码

#include "REG51.H"
#define FOSC	12				//定义晶振频率
#define	INIT_TH0 0x8C			//定时器T0初始值
#define	INIT_TL0 0xB0
#define	TMOD_T00 0x00			//定义T0为方式0，GATE=0，C/T=0,13位计数器
#define	TMOD_T01 0x01			//定义T0为方式1，GATE=0，C/T=0,16位计数器
#define	TMOD_T02 0x02			//定义T0为方式2，GATE=0,C/T=0,自动装入8位计数器
#define	TMOD_T03 0x03			//定义T0为方式3，GATE=0,C/T=0，定时器0分成两个8位计数器，定时器1停止计数

/*缩定定义*/

#define uchar unsigned char
#define	uint unsigned int

/*P1口位定义*/


/*P2 BIT Define*/


/*P3 bit define*/

/************位定义***************/
sbit STTP = P2^7;


/************函数声明*************/
void	delay(uint c);		        	//延时函数
void	out_rxd( unsigned char*d);				//汉字输出


/************汉字点阵*************/
  char code hanzi[][32]={
             {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},

0x24,0x42,0x14,0x42,0x87,0x44,0x48,0x44,0x11,0x48,0x01,0x50,0x9A,0x60,0x85,0xFF,
0x98,0x60,0xE0,0x50,0x82,0x48,0x81,0x48,0xFE,0x44,0x10,0x46,0x0C,0x44,0x00,0x00,//梁1

0x00,0x04,0x10,0x38,0x12,0x00,0x12,0x00,0x12,0x7C,0x12,0x02,0x12,0x02,0xFE,0x82,
0x12,0x72,0x12,0x22,0x12,0x02,0x12,0x0E,0x12,0x44,0x12,0x38,0x10,0x10,0x00,0x00,//志2

0x00,0x80,0x01,0x02,0x06,0x02,0x78,0x82,0x08,0x82,0x08,0x82,0x08,0x82,0x08,0x82,
0xFF,0xFE,0x48,0x82,0x08,0x82,0x08,0x82,0x19,0x82,0x08,0x86,0x00,0x02,0x00,0x00,//生3

0x00,0x00,0x18,0x94,0x20,0x94,0x28,0xA8,0x29,0x28,0x29,0x52,0xAB,0x91,0x6D,0x22,
0x28,0xFC,0x28,0x60,0x29,0x90,0x20,0x90,0x28,0x08,0x30,0x0C,0x20,0x08,0x00,0x00,//家4

0x00,0x00,0x00,0x00,0x1F,0xF0,0x12,0x20,0x12,0x20,0x12,0x20,0x12,0x20,0xFF,0xFC,
0x12,0x22,0x12,0x22,0x12,0x22,0x12,0x22,0x1F,0xF2,0x00,0x02,0x00,0x0E,0x00,0x00,//电5

0x04,0x44,0x1C,0xC4,0xE5,0x44,0x46,0x48,0x08,0x48,0x04,0x00,0x18,0x00,0xFF,0xFF,
0x52,0x44,0x12,0x44,0x52,0x44,0x3F,0xFC,0x12,0x44,0x12,0x44,0x12,0x44,0x00,0x00,//维6

0x04,0x00,0x08,0x00,0x3F,0xFE,0xE0,0x00,0x4F,0xC0,0x04,0x2A,0x19,0x2A,0xF1,0x52,
0x2A,0xD4,0x25,0xA4,0x24,0xA8,0x2A,0x48,0x33,0x50,0x01,0x90,0x01,0x00,0x00,0x00,//修7


0x00,0x00,0x08,0x41,0x30,0x41,0x20,0x42,0x32,0x42,0x2D,0xC4,0x29,0x48,0xA0,0x50,
0x6F,0xE0,0x20,0x50,0x20,0x48,0x20,0x47,0x28,0x42,0x30,0x40,0x20,0x40,0x00,0x00,//实8



0x02,0x00,0x82,0x00,0x72,0x00,0x23,0xFE,0x00,0x04,0x00,0x09,0x00,0x06,0xFF,0xF8,
0x00,0x00,0x00,0x00,0x7F,0xFE,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,//验9

0x00,0x02,0x08,0x02,0x34,0x12,0x24,0x92,0x25,0x92,0x26,0x92,0xA4,0x92,0x64,0xFE,
0x24,0x92,0x24,0x92,0x25,0x92,0x24,0xD2,0x2C,0x12,0x34,0x02,0x20,0x02,0x00,0x00,//室10

0x08,0x20,0x86,0x20,0x60,0xFF,0x07,0x00,0x18,0x00,0x04,0x00,0x55,0xFF,0x55,0x50,
0x55,0x50,0xFD,0x50,0x55,0x52,0x55,0x51,0x55,0xFE,0x54,0x00,0x00,0x00,0x00,0x00,//清11

0x7F,0xFF,0x40,0x40,0x4C,0x20,0x53,0xC2,0x62,0x04,0x04,0x88,0x0C,0xB2,0x34,0x81,
0xC7,0xFE,0x24,0x80,0x14,0xA0,0x08,0x90,0x04,0x88,0x04,0x0C,0x00,0x00,0x00,0x00,//除12

0x00,0x02,0x7F,0xFC,0x48,0x80,0x48,0x80,0x88,0x81,0x8F,0x82,0x80,0x0C,0x00,0x30,
0x7F,0xC0,0x44,0x00,0x44,0x00,0x84,0x00,0x87,0xFF,0x84,0x00,0x84,0x00,0x00,0x00,//所13

0x00,0x40,0x20,0x80,0x21,0x00,0x22,0x00,0x27,0xFF,0x2C,0x90,0x34,0x90,0xE4,0x90,
0x24,0x94,0x24,0x92,0x24,0x93,0x27,0xFE,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,//有14


0x08,0x42,0x49,0x42,0x2A,0x54,0x1C,0x74,0xFF,0xC8,0x1C,0x58,0x2A,0x64,0x4A,0x40,
0x01,0x02,0x0F,0x04,0xF8,0xC8,0x48,0x30,0x08,0xCC,0x0F,0x06,0x08,0x04,0x00,0x00,//数15

0x10,0x40,0x10,0x42,0x10,0x81,0xFF,0xFE,0x11,0x02,0x02,0x0C,0x7F,0xF0,0x49,0x3F,
0x49,0x22,0x49,0x22,0x4F,0xE2,0x49,0x22,0x49,0x22,0x79,0x3F,0x01,0x00,0x00,0x00,//据16

0x00,0x04,0x00,0x18,0x7F,0xE4,0x40,0x04,0x42,0x04,0x42,0x04,0x42,0x04,0x42,0x04,
0x5F,0xFC,0x42,0x04,0x42,0x84,0x42,0x74,0x46,0x24,0x42,0x04,0x40,0x04,0x00,0x00,//压17


0x04,0x44,0x0C,0xC4,0x35,0x4C,0xE6,0x48,0x44,0x48,0x08,0x80,0x31,0xFE,0x26,0x00,
0x20,0x00,0xA5,0xFE,0x65,0x24,0x27,0x24,0x25,0x24,0x35,0xFE,0x20,0x00,0x00,0x00,//缩18


0x10,0x40,0x11,0x80,0x16,0x00,0xFF,0xFF,0x12,0x00,0x15,0x80,0x08,0x80,0x30,0xFF,
0xE9,0x42,0x25,0x42,0x22,0x42,0x2D,0x42,0x31,0x7F,0x00,0x80,0x00,0x80,0x00,0x00,//格19

0x00,0x00,0x10,0x04,0x11,0x06,0x11,0x0C,0x11,0xF8,0x11,0x08,0x11,0x10,0x10,0x10,
0xFF,0x00,0x10,0xE0,0x90,0x18,0x70,0x04,0x50,0x02,0x10,0x01,0x00,0x0E,0x00,0x00,//式20

0x00,0x02,0x40,0x0C,0x67,0xF0,0x54,0x00,0x4C,0x00,0x44,0x00,0x7C,0x00,0x44,0x00,
0x44,0x00,0x7C,0x00,0x44,0x00,0x4C,0x00,0x74,0x00,0xC4,0x00,0x44,0x00,0x00,0x00,//严21


0x00,0x02,0x40,0x0C,0x67,0xF0,0x54,0x00,0x4C,0x00,0x44,0x00,0x7C,0x00,0x44,0x00,
0x44,0x00,0x7C,0x00,0x44,0x00,0x4C,0x00,0x74,0x00,0xC4,0x00,0x44,0x00,0x00,0x00,//严22

0x00,0x00,0x10,0x04,0x11,0x06,0x11,0x0C,0x11,0xF8,0x11,0x08,0x11,0x10,0x10,0x10,
0xFF,0x00,0x10,0xE0,0x90,0x18,0x70,0x04,0x50,0x02,0x10,0x01,0x00,0x0E,0x00,0x00,//式23

0x10,0x40,0x11,0x80,0x16,0x00,0xFF,0xFF,0x12,0x00,0x15,0x80,0x08,0x80,0x30,0xFF,
0xE9,0x42,0x25,0x42,0x22,0x42,0x2D,0x42,0x31,0x7F,0x00,0x80,0x00,0x80,0x00,0x00,//格24

0x04,0x44,0x0C,0xC4,0x35,0x4C,0xE6,0x48,0x44,0x48,0x08,0x80,0x31,0xFE,0x26,0x00,
0x20,0x00,0xA5,0xFE,0x65,0x24,0x27,0x24,0x25,0x24,0x35,0xFE,0x20,0x00,0x00,0x00,//缩25

0x00,0x02,0x08,0x02,0x34,0x12,0x24,0x92,0x25,0x92,0x26,0x92,0xA4,0x92,0x64,0xFE,
0x24,0x92,0x24,0x92,0x25,0x92,0x24,0xD2,0x2C,0x12,0x34,0x02,0x20,0x02,0x00,0x00,//室26

0x08,0x20,0x86,0x20,0x60,0xFF,0x07,0x00,0x18,0x00,0x04,0x00,0x55,0xFF,0x55,0x50,
0x55,0x50,0xFD,0x50,0x55,0x52,0x55,0x51,0x55,0xFE,0x54,0x00,0x00,0x00,0x00,0x00,//清27

0x7F,0xFF,0x40,0x40,0x4C,0x20,0x53,0xC2,0x62,0x04,0x04,0x88,0x0C,0xB2,0x34,0x81,
0xC7,0xFE,0x24,0x80,0x14,0xA0,0x08,0x90,0x04,0x88,0x04,0x0C,0x00,0x00,0x00,0x00,//除28

0x00,0x02,0x7F,0xFC,0x48,0x80,0x48,0x80,0x88,0x81,0x8F,0x82,0x80,0x0C,0x00,0x30,
0x7F,0xC0,0x44,0x00,0x44,0x00,0x84,0x00,0x87,0xFF,0x84,0x00,0x84,0x00,0x00,0x00,//所29

0x00,0x40,0x20,0x80,0x21,0x00,0x22,0x00,0x27,0xFF,0x2C,0x90,0x34,0x90,0xE4,0x90,
0x24,0x94,0x24,0x92,0x24,0x93,0x27,0xFE,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,//有30


0x08,0x42,0x49,0x42,0x2A,0x54,0x1C,0x74,0xFF,0xC8,0x1C,0x58,0x2A,0x64,0x4A,0x40,
0x01,0x02,0x0F,0x04,0xF8,0xC8,0x48,0x30,0x08,0xCC,0x0F,0x06,0x08,0x04,0x00,0x00,//数31

0x10,0x40,0x10,0x42,0x10,0x81,0xFF,0xFE,0x11,0x02,0x02,0x0C,0x7F,0xF0,0x49,0x3F,
0x49,0x22,0x49,0x22,0x4F,0xE2,0x49,0x22,0x49,0x22,0x79,0x3F,0x01,0x00,0x00,0x00,//据32

0x00,0x04,0x00,0x18,0x7F,0xE4,0x40,0x04,0x42,0x04,0x42,0x04,0x42,0x04,0x42,0x04,
0x5F,0xFC,0x42,0x04,0x42,0x84,0x42,0x74,0x46,0x24,0x42,0x04,0x40,0x04,0x00,0x00,//压33

0x00,0x04,0x00,0x18,0x7F,0xE4,0x40,0x04,0x42,0x04,0x42,0x04,0x42,0x04,0x42,0x04,
0x5F,0xFC,0x42,0x04,0x42,0x84,0x42,0x74,0x46,0x24,0x42,0x04,0x40,0x04,0x00,0x00,//压34


0x04,0x44,0x0C,0xC4,0x35,0x4C,0xE6,0x48,0x44,0x48,0x08,0x80,0x31,0xFE,0x26,0x00,
0x20,0x00,0xA5,0xFE,0x65,0x24,0x27,0x24,0x25,0x24,0x35,0xFE,0x20,0x00,0x00,0x00,//缩35


0x10,0x40,0x11,0x80,0x16,0x00,0xFF,0xFF,0x12,0x00,0x15,0x80,0x08,0x80,0x30,0xFF,
0xE9,0x42,0x25,0x42,0x22,0x42,0x2D,0x42,0x31,0x7F,0x00,0x80,0x00,0x80,0x00,0x00,//格36

0x00,0x00,0x10,0x04,0x11,0x06,0x11,0x0C,0x11,0xF8,0x11,0x08,0x11,0x10,0x10,0x10,
0xFF,0x00,0x10,0xE0,0x90,0x18,0x70,0x04,0x50,0x02,0x10,0x01,0x00,0x0E,0x00,0x00,//式37

0x00,0x02,0x40,0x0C,0x67,0xF0,0x54,0x00,0x4C,0x00,0x44,0x00,0x7C,0x00,0x44,0x00,
0x44,0x00,0x7C,0x00,0x44,0x00,0x4C,0x00,0x74,0x00,0xC4,0x00,0x44,0x00,0x00,0x00,//严38


0x00,0x02,0x40,0x0C,0x67,0xF0,0x54,0x00,0x4C,0x00,0x44,0x00,0x7C,0x00,0x44,0x00,
0x44,0x00,0x7C,0x00,0x44,0x00,0x4C,0x00,0x74,0x00,0xC4,0x00,0x44,0x00,0x00,0x00,//严39


0x04,0x00,0x08,0x00,0x3F,0xFE,0xE0,0x00,0x4F,0xC0,0x04,0x2A,0x19,0x2A,0xF1,0x52,
0x2A,0xD4,0x25,0xA4,0x24,0xA8,0x2A,0x48,0x33,0x50,0x01,0x90,0x01,0x00,0x00,0x00,//修40


0x00,0x00,0x08,0x41,0x30,0x41,0x20,0x42,0x32,0x42,0x2D,0xC4,0x29,0x48,0xA0,0x50,
0x6F,0xE0,0x20,0x50,0x20,0x48,0x20,0x47,0x28,0x42,0x30,0x40,0x20,0x40,0x00,0x00,//实41



0x02,0x00,0x82,0x00,0x72,0x00,0x23,0xFE,0x00,0x04,0x00,0x09,0x00,0x06,0xFF,0xF8,
0x00,0x00,0x00,0x00,0x7F,0xFE,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,//验42

0x00,0x02,0x08,0x02,0x34,0x12,0x24,0x92,0x25,0x92,0x26,0x92,0xA4,0x92,0x64,0xFE,
0x24,0x92,0x24,0x92,0x25,0x92,0x24,0xD2,0x2C,0x12,0x34,0x02,0x20,0x02,0x00,0x00,//室43

0x08,0x20,0x86,0x20,0x60,0xFF,0x07,0x00,0x18,0x00,0x04,0x00,0x55,0xFF,0x55,0x50,
0x55,0x50,0xFD,0x50,0x55,0x52,0x55,0x51,0x55,0xFE,0x54,0x00,0x00,0x00,0x00,0x00,//清44

0x7F,0xFF,0x40,0x40,0x4C,0x20,0x53,0xC2,0x62,0x04,0x04,0x88,0x0C,0xB2,0x34,0x81,
0xC7,0xFE,0x24,0x80,0x14,0xA0,0x08,0x90,0x04,0x88,0x04,0x0C,0x00,0x00,0x00,0x00,//除45

0x00,0x02,0x7F,0xFC,0x48,0x80,0x48,0x80,0x88,0x81,0x8F,0x82,0x80,0x0C,0x00,0x30,
0x7F,0xC0,0x44,0x00,0x44,0x00,0x84,0x00,0x87,0xFF,0x84,0x00,0x84,0x00,0x00,0x00,//所46

0x00,0x40,0x20,0x80,0x21,0x00,0x22,0x00,0x27,0xFF,0x2C,0x90,0x34,0x90,0xE4,0x90,
0x24,0x94,0x24,0x92,0x24,0x93,0x27,0xFE,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,//有47


0x08,0x42,0x49,0x42,0x2A,0x54,0x1C,0x74,0xFF,0xC8,0x1C,0x58,0x2A,0x64,0x4A,0x40,
0x01,0x02,0x0F,0x04,0xF8,0xC8,0x48,0x30,0x08,0xCC,0x0F,0x06,0x08,0x04,0x00,0x00,//数48

0x10,0x40,0x10,0x42,0x10,0x81,0xFF,0xFE,0x11,0x02,0x02,0x0C,0x7F,0xF0,0x49,0x3F,
0x49,0x22,0x49,0x22,0x4F,0xE2,0x49,0x22,0x49,0x22,0x79,0x3F,0x01,0x00,0x00,0x00,//据49

0x00,0x04,0x00,0x18,0x7F,0xE4,0x40,0x04,0x42,0x04,0x42,0x04,0x42,0x04,0x42,0x04,
0x5F,0xFC,0x42,0x04,0x42,0x84,0x42,0x74,0x46,0x24,0x42,0x04,0x40,0x04,0x00,0x00,//压50


0x04,0x44,0x0C,0xC4,0x35,0x4C,0xE6,0x48,0x44,0x48,0x08,0x80,0x31,0xFE,0x26,0x00,
0x20,0x00,0xA5,0xFE,0x65,0x24,0x27,0x24,0x25,0x24,0x35,0xFE,0x20,0x00,0x00,0x00,//缩51


0x10,0x40,0x11,0x80,0x16,0x00,0xFF,0xFF,0x12,0x00,0x15,0x80,0x08,0x80,0x30,0xFF,
0xE9,0x42,0x25,0x42,0x22,0x42,0x2D,0x42,0x31,0x7F,0x00,0x80,0x00,0x80,0x00,0x00,//格52




{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},

{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},


		    {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,    	 //'!'
			 0x00,0x00,0x00,0x00,0x38,0x00,0x7F,0xCC,
			 0x7F,0xCC,0x38,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
		    },
			{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//显示空屏，如果只有一个字或将字全部移出必须设置一个空屏幕
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},

			 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},

			 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,			 
		  	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
			 };

/************主函数***************/
void main()
{
	uchar i,j,k;	//i:每个字的显示循环；j每个字的显示码除以2；k每列刷新次数
 unsigned int b=0;		//显示偏移控制，char类型最多只能显示14个汉字+一个空白位字符
	uchar a;		//控制移动间隔时间
	SCON = 0x00;
	while(1)
	{	
	  j=0;
	  if(a>=0)	//移动间隔时间；取值0--255
		{
		  a=0;
		  b+=2;
		  if(b>=1760)	//显示到最后一个字，回头显示，判断值=字数*32
		   {
		     b=0;
		   }	
		}
  	  for(i=0;i<16;i++)
	   {
	  	 P1=i;
		 for(k=0;k<5;k++)
 	  	  {	
			STTP = 0;
			out_rxd(&hanzi[3][j+b+1]);
			out_rxd(&hanzi[3][j+b]);
			out_rxd(&hanzi[2][j+b+1]);
			out_rxd(&hanzi[2][j+b]);
			out_rxd(&hanzi[1][j+b+1]);
			out_rxd(&hanzi[1][j+b]);
			out_rxd(&hanzi[0][j+b+1]);
			out_rxd(&hanzi[0][j+b]);
			STTP = 1;
			delay(1);
		  }
		 j=j+2;
	   }
	   a++;
   	 }
}

/************子函数**************/

void delay(uint c)
	{
	  int i,j;
	  for(i=0;i<c;i++)
		for(j=0;j<10;j++)
			;
	}

void out_rxd(uchar *d)
{
	SBUF = *d;			//启动串行口传送
	while(TI == 0);		//等待串口传送结束
	TI = 0;				//将串口中断标志位置0
}