abstract.txt

来自「这是单片机C51典型应用设计代码」· 文本 代码 · 共 30 行

Analog to Digital Converter Example Program
===========================================
This example program shows how to configure and use the A/D Converter
of the following microcontrollers:

   * Analog Devices ADuC831
   * Analog Devices ADuC832

After configuring the A/D, the program reads all of the A/D Converter
channels and outputs the converted values using the serial port.

To run this program...

1. Select the target for your chip
2. Build the project (Project Menu, Build Target)
3. Start the debugger (Debug Menu, Start/Stop Debug Session)
4. View the Serial Window (View Menu, Serial Window #1)
5. View the A/D converter peripheral (Peripheral Menu, A/D Converter)
6. Run the program (Debug Menu, Go)
7. Click on the Toolbox buttons to change input voltages

A debug script (debug.ini) creates buttons that set different 
analog values in A/D channels.  As the program runs, you 
will see the A/D input and output change.

Other buttons create signals that generate sine wave 
or sawtooth patterns as analog inputs.  礦ision3 users may 
enable the built-in Logic Analyzer to view, measure and compare
these input signals graphically.