📄 cout.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.12 09/21/2001
-- Compiled: 09/09/2008 08:40:45
-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "cout"
BEGIN
DEVICE = "EPM7064STC44-10";
"achange" : INPUT_PIN = 3 ; -- LC4
"bchange" : INPUT_PIN = 2 ; -- LC5
"blch" : INPUT_PIN = 6 ; -- LC1
"blclk" : INPUT_PIN = 5 ; -- LC3
"change" : INPUT_PIN = 40 ;
"clk" : INPUT_PIN = 37 ;
"dir" : INPUT_PIN = 35 ; -- LC64
"en" : INPUT_PIN = 34 ; -- LC62
"sel0" : INPUT_PIN = 33 ; -- LC57
"sel1" : INPUT_PIN = 31 ; -- LC53
"sel2" : INPUT_PIN = 30 ; -- LC52
"ADD0" : OUTPUT_PIN = 28 ; -- LC51
"ADD1" : OUTPUT_PIN = 27 ; -- LC49
"ADD2" : OUTPUT_PIN = 25 ; -- LC46
"ADD3" : OUTPUT_PIN = 23 ; -- LC41
"blcf" : OUTPUT_PIN = 43 ; -- LC14
"dat0" : OUTPUT_PIN = 22 ; -- LC40
"dat1" : OUTPUT_PIN = 21 ; -- LC37
"dat2" : OUTPUT_PIN = 20 ; -- LC36
"dat3" : OUTPUT_PIN = 19 ; -- LC35
"dat4" : OUTPUT_PIN = 18 ; -- LC33
"dat5" : OUTPUT_PIN = 15 ; -- LC17
"dat6" : OUTPUT_PIN = 14 ; -- LC19
"dat7" : OUTPUT_PIN = 13 ; -- LC20
"dat8" : OUTPUT_PIN = 12 ; -- LC21
"dat9" : OUTPUT_PIN = 11 ; -- LC24
"dat10" : OUTPUT_PIN = 10 ; -- LC25
"dat11" : OUTPUT_PIN = 8 ; -- LC30
"|BL:222|:3" : LOCATION = LC3 ; -- PIN 5
"|COUT40:322|LPM_ADD_SUB:120|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC44 ;
"|COUT40:322|LPM_ADD_SUB:120|addcore:adder|addcore:adder0|result_node2" : LOCATION = LC42 ;
"|COUT40:322|LPM_ADD_SUB:120|addcore:adder|addcore:adder0|result_node3" : LOCATION = LC45 ;
"|COUT40:322|LPM_ADD_SUB:147|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC56 ; -- PIN 32
"|COUT40:322|LPM_ADD_SUB:147|addcore:adder|addcore:adder0|result_node2" : LOCATION = LC61 ;
"|COUT40:322|LPM_ADD_SUB:186|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC38 ;
"|COUT40:322|LPM_ADD_SUB:186|addcore:adder|addcore:adder0|result_node2" : LOCATION = LC39 ;
"|COUT40:322|LPM_ADD_SUB:186|addcore:adder|addcore:adder0|result_node3" : LOCATION = LC47 ;
"|COUT40:322|LPM_ADD_SUB:213|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC62 ; -- PIN 34
"|COUT40:322|LPM_ADD_SUB:213|addcore:adder|addcore:adder0|result_node2" : LOCATION = LC55 ;
"|COUT40:322|:6" : LOCATION = LC53 ; -- PIN 31
"|COUT40:322|:8" : LOCATION = LC43 ;
"|COUT40:322|:10" : LOCATION = LC60 ;
"|COUT40:322|:12" : LOCATION = LC9 ;
"|COUT40:322|:14" : LOCATION = LC57 ; -- PIN 33
"|COUT40:322|:16" : LOCATION = LC59 ;
"|COUT40:322|:18" : LOCATION = LC50 ;
"|COUT40:322|:23" : LOCATION = LC2 ; -- |COUT40:322|addr_temp3
"|COUT40:322|:24" : LOCATION = LC63 ; -- |COUT40:322|addr_temp2
"|COUT40:322|:25" : LOCATION = LC58 ; -- |COUT40:322|addr_temp1
"|COUT40:322|:26" : LOCATION = LC52 ; -- PIN 30 -- |COUT40:322|addr_temp0
"|COUT40:322|:27" : LOCATION = LC54 ; -- |COUT40:322|add_temp2
"|COUT40:322|:28" : LOCATION = LC34 ; -- |COUT40:322|add_temp1
"|COUT40:322|:29" : LOCATION = LC64 ; -- PIN 35 -- |COUT40:322|add_temp0
"|XXOUT:228|:2" : LOCATION = LC4 ; -- PIN 3
"|XXOUT:228|:4" : LOCATION = LC1 ; -- PIN 6 -- |XXOUT:228|first
":177" : LOCATION = LC11 ; -- PIN 44 -- Qa
":178" : LOCATION = LC13 ; -- Qb
":220" : LOCATION = LC15 ; -- reset
":244" : LOCATION = LC8 ; -- PIN 1 -- en2
END;
INTERNAL_INFO "cout"
BEGIN
DEVICE = EPM7064STC44-10;
LC30 : LORAX = "G71R0";
LC25 : LORAX = "G103R0";
LC24 : LORAX = "G24R0";
LC21 : LORAX = "G21R0";
LC20 : LORAX = "G57R0";
LC19 : LORAX = "G56R0";
LC17 : LORAX = "G54R0";
LC33 : LORAX = "G58R0";
LC35 : LORAX = "G60R0";
LC36 : LORAX = "G61R0";
LC37 : LORAX = "G25R0";
LC40 : LORAX = "G28R0";
LC41 : LORAX = "G107R0";
LC46 : LORAX = "G75R0";
LC49 : LORAX = "G29R0";
LC51 : LORAX = "G31R0";
LC14 : LORAX = "G100R0";
LC9 : LORAX = "G66R0,PA19R0C1,PA19R0C2";
OH63R0P35 : LORAX = "G48R0,PA10R0C0,PA9R0C3,PA9R0C2";
LC45 : LORAX = "G74R0,PA26R0C0";
LC2 : LORAX = "G18R0,PA0R0C2";
LC47 : LORAX = "G76R0,PA19R0C0";
LC58 : LORAX = "G79R0,PA26R0C3,PA26R0C2";
LC52 : LORAX = "G32R0,PA1R0C2,PA1R0C3";
OH64R0P37 : LORAX = "G115R0,PA35R0C0,PA33R0C2,PA33R0C3";
LC8 : LORAX = "G53R0,PA15R0C0,PA11R0C3,PA11R0C2";
OH61R0P34 : LORAX = "G46R0,PA12R0C0";
LC4 : LORAX = "G20R0,PA6R0C0,PA2R0C2,PA2R0C3";
LC1 : LORAX = "G17R0,PA5R0C0";
OH2R0P5 : LORAX = "G85R0,PA21R0C0";
LC38 : LORAX = "G26R0,PA6R0C2,PA6R0C3";
LC63 : LORAX = "G113R0,PA34R0C2";
LC42 : LORAX = "G108R0,PA32R0C2,PA32R0C3";
LC39 : LORAX = "G27R0,PA3R0C3,PA3R0C2";
LC57 : LORAX = "G78R0,PA24R0C2,PA24R0C1";
LC59 : LORAX = "G80R0,PA18R0C1,PA18R0C2";
LC50 : LORAX = "G30R0,PA5R0C2,PA5R0C1";
LC13 : LORAX = "G99R0,PA29R0C2";
OH4R0P2 : LORAX = "G116R0,PA28R0C0";
LC53 : LORAX = "G62R0,PA17R0C3,PA17R0C2";
LC54 : LORAX = "G63R0,PA15R0C3";
LC55 : LORAX = "G64R0,PA12R0C3";
LC64 : LORAX = "G114R0,PA31R0C3";
LC44 : LORAX = "G110R0,PA34R0C3,PA31R0C2";
LC34 : LORAX = "G59R0,PA10R0C3,PA15R0C2";
LC62 : LORAX = "G112R0,PA30R0C2";
LC56 : LORAX = "G65R0,PA10R0C2";
LC61 : LORAX = "G111R0,PA29R0C3";
LC43 : LORAX = "G109R0,PA28R0C3,PA28R0C2";
LC60 : LORAX = "G81R0,PA22R0C3,PA22R0C2";
LC11 : LORAX = "G68R0,PA24R0C3";
OH3R0P3 : LORAX = "G86R0,PA22R0C0";
OH0R0P6 : LORAX = "G83R0,PA18R0C0";
LC3 : LORAX = "G19R0,PA3R0C0";
LC15 : LORAX = "G101R0,PA33R0C0";
END;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -