cout.pin

步进电机8细分CPLD相序及外部DA输出 实际细分数可达64细分 使用Atmel maxplus2 V10.1软件

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.



N.C. = No Connect. This pin has no internal connection to the device.
VCC = Dedicated power pin, which MUST be connected to VCC.
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.

----------------------------------------------------------------------------

CHIP "cout" ASSIGNED TO AN EPM7064STC44-10
TDI                              : 1
bchange                          : 2
achange                          : 3
GND                              : 4
blclk                            : 5
blch                             : 6
TMS                              : 7
dat11                            : 8
VCC                              : 9
dat10                            : 10
dat9                             : 11
dat8                             : 12
dat7                             : 13
dat6                             : 14
dat5                             : 15
GND                              : 16
VCC                              : 17
dat4                             : 18
dat3                             : 19
dat2                             : 20
dat1                             : 21
dat0                             : 22
ADD3                             : 23
GND                              : 24
ADD2                             : 25
TCK                              : 26
ADD1                             : 27
ADD0                             : 28
VCC                              : 29
sel2                             : 30
sel1                             : 31
TDO                              : 32
sel0                             : 33
en                               : 34
dir                              : 35
GND                              : 36
clk                              : 37
GND                              : 38
GND                              : 39
change                           : 40
VCC                              : 41
RESERVED                         : 42
blcf                             : 43
RESERVED                         : 44