vliss2.mms

一个雷达系统的模拟程序！比较逼真的展示雷达的工作过程1

; Manoeuvreing and Mooring Simulator
; exercise file

VERSION=3.02

GROUP=FILES

 ship_file=92040.SHB
 chart_file=VLISS.CRT
 routes_file=VLISS2.TGT
 tests_file=

GROUP=CHART

 scale=1:150000
 advance=6.2500                  ; mile
 transfer=-1.5563                ; mile
 isobat_visible=1
 depth_visible=1
 lighhouse_visible=1
 bouy_visible=1
 separation_line_visible=1
 water_flow_visible=1
 water_level_visible=1
 text_visible=1
 routes_visible=1
 gridlines_visible=1
 triangulation_visible=0

GROUP=TRAJECTORY

 ring_buffer_step=12             ; second
 own_trace=0
 own_contour=0
 own_contour_step=60             ; second
 target_trace=0
 target_contour=0
 target_contour_step=60          ; second
 test_trace=0
 test_contour=0
 test_contour_step=60            ; second

GROUP=ENVIRONMENT

 wind_speed=15.00                ; meter per second
 wind_direction=225.00           ; degree
 flow_use_chart=0
 flow_factor=1.0
 flow_speed=2.00                 ; knot
 flow_direction=45.0             ; degree
 depth_use_chart=0
 depth_factor=0.0                ; meter
 depth_speed=100.00              ; knot
 wave_height=0.00                ; meter

GROUP=SIMULATION

 init_time=00.00:00
 current_time=00.00:00
 update_period=1                 ; second
 time_scale=1
 check_mooring=1
 check_grounding=1
 check_exercise=0
 exercise_advance=0.0000         ; mile
 exercise_transfer=0.0000        ; mile
 location_unit=0                 ; 0=lat/lon, 1=mile, 2=kilometer, 3=meter
 speed_unit=0                    ; 0=knot, 1=km/h, 2=m/s
 time_unit=0                     ; 0=hh.mm:ss, 1=sssss
 throttle=0.00
 engine_rpm_pitch=0.000
 speed_surge=12.00               ; knot
 speed_sway=0.00                 ; knot
 rate_of_turn=0.0                ; degree per minute
 advance=9.350                   ; mile
 transfer=-3.579                 ; mile
 heading=150.0                   ; degree
 rudder_setting=0.0              ; degree
 rudder=0.0                      ; degree
 autopilot_mode=1                ; 0=manual, 1=heading, 2=trace
 autopilot_course=150.0          ; degree

; End Of File