exgconn.c

一个用来实现偏微分方程中网格的计算库

/*
 * Copyright (c) 2006 Sandia Corporation. Under the terms of Contract
 * DE-AC04-94AL85000 with Sandia Corporation, the U.S. Governement
 * retains certain rights in this software.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 * 
 *     * Redistributions in binary form must reproduce the above
 *       copyright notice, this list of conditions and the following
 *       disclaimer in the documentation and/or other materials provided
 *       with the distribution.  
 * 
 *     * Neither the name of Sandia Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */
/*****************************************************************************
*
* exgconn - exodusII read edge/face/element block connectivity
*
* entry conditions - 
*   expelb must be called first to establish element block parameters.
*   input parameters:
*       int     exoid           exodus file id
*       int     blk_type        block type (edge, face, element)
*       int     blk_id          block id
*
* exit conditions - 
*       int*    nodeconn        nodal connectivity array
*       int*    edgeconn        edge connectivity array (where applicable)
*       int*    faceconn        face connectivity array (where applicable)
*
* revision history - 
*
* $Id: exgconn.c 2928 2008-07-11 17:45:07Z friedmud $
*/
#include <stdlib.h>
#include "exodusII.h"
#include "exodusII_int.h"

/*
 * reads the connectivity array for an element block
 */

int ex_get_conn( int   exoid,
                 ex_entity_type blk_type,
                 int   blk_id,
                 int*  nodeconn,
                 int*  edgeconn,
                 int*  faceconn )
{
   int connid, econnid, fconnid, blk_id_ndx, status;
   int numnodperentdim, numedgperentdim, numfacperentdim;
   int iexit = (EX_NOERR); /* exit status */
   size_t num_nodes_per_entry, num_edges_per_entry, num_faces_per_entry;
   char errmsg[MAX_ERR_LENGTH];

   const char* dnumblkent;
   const char* dnumnodent;
   const char* dnumedgent;
   const char* dnumfacent;
   const char* vnodeconn;
   const char* vedgeconn;
   const char* vfaceconn;

   /* Should we warn if edgeconn or faceconn are non-NULL?
    * No, fail silently so the same code can be used to read any type of block info.
    * However, we will warn if edgeconn or faceconn are NULL but num_edges_per_entry
    * or num_faces_per_entry (respectively) are positive.
    */
   exerrval = 0; /* clear error code */

   /* Locate index of element block id in VAR_ID_EL_BLK array */

   blk_id_ndx = ex_id_lkup(exoid,blk_type,blk_id);
   if (exerrval != 0) 
   {
     if (exerrval == EX_NULLENTITY)
     {
       sprintf(errmsg,
              "Warning: no connectivity array for NULL %s %d in file id %d",
               ex_name_of_object(blk_type),blk_id,exoid);
       ex_err("ex_get_conn",errmsg,EX_MSG);
       return (EX_WARN); /* no connectivity array for this element block */
     }
     else
     {
       sprintf(errmsg,
        "Error: failed to locate %s id %d in id array in file id %d",
               ex_name_of_object(blk_type),blk_id,exoid);
       ex_err("ex_get_conn",errmsg,exerrval);
       return (EX_FATAL);
     }
   }

   switch (blk_type) {
   case EX_EDGE_BLOCK:
     dnumblkent = DIM_NUM_ED_IN_EBLK(blk_id_ndx);
     dnumnodent = DIM_NUM_NOD_PER_ED(blk_id_ndx);
     dnumedgent = 0;
     dnumfacent = 0;
     vnodeconn = VAR_EBCONN(blk_id_ndx);
     vedgeconn = 0;
     vfaceconn = 0;
     break;
   case EX_FACE_BLOCK:
     dnumblkent = DIM_NUM_FA_IN_FBLK(blk_id_ndx);
     dnumnodent = DIM_NUM_NOD_PER_FA(blk_id_ndx);
     dnumedgent = 0;
     dnumfacent = 0;
     vnodeconn = VAR_FBCONN(blk_id_ndx);
     vedgeconn = 0;
     vfaceconn = 0;
     break;
   case EX_ELEM_BLOCK:
     dnumblkent = DIM_NUM_EL_IN_BLK(blk_id_ndx);
     dnumnodent = DIM_NUM_NOD_PER_EL(blk_id_ndx);
     dnumedgent = DIM_NUM_EDG_PER_EL(blk_id_ndx);
     dnumfacent = DIM_NUM_FAC_PER_EL(blk_id_ndx);
     vnodeconn = VAR_CONN(blk_id_ndx);
     vedgeconn = VAR_ECONN(blk_id_ndx);
     vfaceconn = VAR_FCONN(blk_id_ndx);
     break;
   }
/* inquire id's of previously defined dimensions  */

   if ((status = nc_inq_dimid (exoid, dnumnodent, &numnodperentdim)) != NC_NOERR)
   {
     exerrval = status;
     sprintf(errmsg,
      "Error: failed to locate number of nodes/entity for %s %d in file id %d",
             ex_name_of_object(blk_type),blk_id,exoid);
     ex_err("ex_get_conn",errmsg,exerrval);
     return(EX_FATAL);
   }

   if (nc_inq_dimlen(exoid, numnodperentdim, &num_nodes_per_entry) != NC_NOERR)
   {
     exerrval = status;
     sprintf(errmsg,
       "Error: failed to get number of nodes/entity for %s %d in file id %d",
             ex_name_of_object(blk_type),blk_id,exoid);
     ex_err("ex_get_conn",errmsg, exerrval);
     return(EX_FATAL);
   }

   if ( dnumedgent ) {
     num_edges_per_entry = 0;
     if ((status = nc_inq_dimid(exoid, dnumedgent, &numedgperentdim)) != NC_NOERR) {
       numedgperentdim = -1;
     } else {
       if ((status = nc_inq_dimlen(exoid, numedgperentdim, &num_edges_per_entry)) != NC_NOERR) {
         exerrval = status;
         sprintf(errmsg,
           "Error: failed to get number of edges/entry for %s %d in file id %d",
		 ex_name_of_object(blk_type),blk_id,exoid);
         ex_err("ex_get_conn",errmsg, exerrval);
         return(EX_FATAL);
       }
     }
   }

   if ( dnumfacent ) {
     num_faces_per_entry = 0;
     if ((status = nc_inq_dimid(exoid, dnumfacent, &numfacperentdim)) != NC_NOERR) {
       numfacperentdim = -1;
     } else {
       if ((status = nc_inq_dimlen(exoid, numfacperentdim, &num_faces_per_entry)) != NC_NOERR) {
         exerrval = status;
         sprintf(errmsg,
           "Error: failed to get number of faces/entry for %s %d in file id %d",
		 ex_name_of_object(blk_type),blk_id,exoid);
         ex_err("ex_get_conn",errmsg, exerrval);
         return(EX_FATAL);
       }
     }
   }


   if ((status = nc_inq_varid(exoid, vnodeconn, &connid)) != NC_NOERR)
   {
     exerrval = status;
     sprintf(errmsg,
        "Error: failed to locate connectivity array for %s %d in file id %d",
             ex_name_of_object(blk_type),blk_id,exoid);
     ex_err("ex_get_conn",errmsg, exerrval);
     return(EX_FATAL);
   }

   status = 0;
   if (edgeconn && (numedgperentdim > 0) &&
       ((status = nc_inq_varid (exoid, vedgeconn, &econnid)) != NC_NOERR))
   {
     exerrval = status;
     sprintf(errmsg,
        "Error: failed to locate edge connectivity array for %s %d in file id %d",
             ex_name_of_object(blk_type),blk_id,exoid);
     ex_err("ex_get_conn",errmsg, exerrval);
     return(EX_FATAL);
   }

   if (faceconn && (numfacperentdim > 0) &&
       ((status = nc_inq_varid (exoid, vfaceconn, &fconnid)) != NC_NOERR))
   {
     exerrval = status;
     sprintf(errmsg,
        "Error: failed to locate face connectivity array for %s %d in file id %d",
             ex_name_of_object(blk_type),blk_id,exoid);
     ex_err("ex_get_conn",errmsg, exerrval);
     return(EX_FATAL);
   }


   /* read in the connectivity array */
   if ( edgeconn && num_edges_per_entry > 0) {
     status = nc_get_var_int(exoid, econnid, edgeconn);

     if (status != NC_NOERR)
       {
       exerrval = status;
       sprintf(errmsg,
         "Error: failed to get edge connectivity array for %s %d in file id %d",
	       ex_name_of_object(blk_type),blk_id,exoid);
       ex_err("ex_get_conn",errmsg, exerrval);
       return(EX_FATAL);
       }
   }

   if ( faceconn && num_faces_per_entry > 0) {
     status = nc_get_var_int(exoid, fconnid, faceconn);
     
     if (status != NC_NOERR)
       {
       exerrval = status;
       sprintf(errmsg,
         "Error: failed to get face connectivity array for %s %d in file id %d",
	       ex_name_of_object(blk_type),blk_id,exoid);
       ex_err("ex_get_conn",errmsg, exerrval);
       return(EX_FATAL);
       }
   }

   if ( nodeconn && num_nodes_per_entry > 0) {
     status = nc_get_var_int(exoid, connid, nodeconn);

     if (status != NC_NOERR)
       {
       exerrval = status;
       sprintf(errmsg,
         "Error: failed to get connectivity array for %s %d in file id %d",
	       ex_name_of_object(blk_type),blk_id,exoid);
       ex_err("ex_get_conn",errmsg, exerrval);
       return(EX_FATAL);
       }
   }

   return iexit;
}