exgcor.c

一个用来实现偏微分方程中网格的计算库

/*
 * Copyright (c) 2005 Sandia Corporation. Under the terms of Contract
 * DE-AC04-94AL85000 with Sandia Corporation, the U.S. Governement
 * retains certain rights in this software.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 * 
 *     * Redistributions in binary form must reproduce the above
 *       copyright notice, this list of conditions and the following
 *       disclaimer in the documentation and/or other materials provided
 *       with the distribution.  
 * 
 *     * Neither the name of Sandia Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */
/*****************************************************************************
*
* exgcor - ex_get_coord
*
* entry conditions - 
*   input parameters:
*       int     exoid                   exodus file id
*
* exit conditions - 
*       float*  x_coord                 X coord array
*       float*  y_coord                 y coord array
*       float*  z_coord                 z coord array
*
* revision history - 
*
*  $Id: exgcor.c 2928 2008-07-11 17:45:07Z friedmud $
*
*****************************************************************************/

#include "exodusII.h"
#include "exodusII_int.h"

/*!
 * reads the coordinates of the nodes.
 * Memory must be allocated for the coordinate arrays (x_coor, y_coor,
 * and z_coor) before this call is made. The length of each of these
 * arrays is the number of nodes in the mesh.  Because the coordinates
 * are floating point values, the application code must declare the
 * arrays passed to be the appropriate type "float" or "double"
 * to match the compute word size passed in ex_create() or ex_open()
 * \param      exoid  exodus file id
 * \param[out] x_coor Returned X coordinates of the nodes. These are
 *                    returned only if x_coor is non-NULL.
 * \param[out] y_coor Returned Y coordinates of the nodes. These are
 *                    returned only if y_coor is non-NULL.
 * \param[out] z_coor Returned Z coordinates of the nodes. These are
 *                    returned only if z_coor is non-NULL.
 */

int ex_get_coord (int exoid,
                  void *x_coor,
                  void *y_coor,
                  void *z_coor)
{
  int status;
  int coordid;
  int coordidx, coordidy, coordidz;

  int numnoddim, ndimdim, i;
  size_t num_nod, num_dim, start[2], count[2];
  char errmsg[MAX_ERR_LENGTH];

  exerrval = 0;

  /* inquire id's of previously defined dimensions  */

  if (nc_inq_dimid (exoid, DIM_NUM_NODES, &numnoddim) != NC_NOERR)
    {
      /* If not found, then this file is storing 0 nodes.
         Return immediately */
      return (EX_NOERR);
    }

  if ((status = nc_inq_dimlen(exoid, numnoddim, &num_nod)) != NC_NOERR)
    {
      exerrval = status;
      sprintf(errmsg,
              "Error: failed to get number of nodes in file id %d",
              exoid);
      ex_err("ex_get_coord",errmsg,exerrval);
      return (EX_FATAL);
    }

  if (ex_get_dimension(exoid, DIM_NUM_DIM, "dimensions",
		       &num_dim, &ndimdim, "ex_get_coord") != NC_NOERR) {
    return(EX_FATAL);
  }
      
  /* read in the coordinates  */
  if (ex_large_model(exoid) == 0) {
    if ((status = nc_inq_varid (exoid, VAR_COORD, &coordid)) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
              "Error: failed to locate nodal coordinates in file id %d", exoid);
      ex_err("ex_get_coord",errmsg,exerrval);
      return (EX_FATAL);
    } 

    for (i=0; i<num_dim; i++) {
      char *which;
      start[0] = i;
      start[1] = 0;

      count[0] = 1;
      count[1] = num_nod;

      if (i == 0 && x_coor != NULL) {
	which = "X";
	if (ex_comp_ws(exoid) == 4) {
	  status = nc_get_vara_float(exoid, coordid, start, count, x_coor);
	} else {
	  status = nc_get_vara_double(exoid, coordid, start, count, x_coor);
	}
      } 
      else if (i == 1 && y_coor != NULL) {
	which = "Y";
	if (ex_comp_ws(exoid) == 4) {
	  status = nc_get_vara_float(exoid, coordid, start, count, y_coor);
	} else {
	  status = nc_get_vara_double(exoid, coordid, start, count, y_coor);
	}
      } 
      else if (i == 2 && z_coor != NULL) {
	which = "Z";
	if (ex_comp_ws(exoid) == 4) {
	  status = nc_get_vara_float(exoid, coordid, start, count, z_coor);
	} else {
	  status = nc_get_vara_double(exoid, coordid, start, count, z_coor);
	}
      }

      if (status != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to get %s coord array in file id %d", which, exoid);
	ex_err("ex_get_coord",errmsg,exerrval);
	return (EX_FATAL);
      }
    }

  } else {
    if ((status = nc_inq_varid (exoid, VAR_COORD_X, &coordidx)) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
	      "Error: failed to locate x nodal coordinates in file id %d", exoid);
      ex_err("ex_get_coord",errmsg,exerrval);
      return (EX_FATAL);
    }

    if (num_dim > 1) {
      if ((status = nc_inq_varid (exoid, VAR_COORD_Y, &coordidy)) != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate y nodal coordinates in file id %d", exoid);
	ex_err("ex_get_coord",errmsg,exerrval);
	return (EX_FATAL);
      }
    } else {
      coordidy = 0;
    }

    if (num_dim > 2) {
      if ((status = nc_inq_varid (exoid, VAR_COORD_Z, &coordidz)) != NC_NOERR) {
	exerrval = status;
	sprintf(errmsg,
		"Error: failed to locate z nodal coordinates in file id %d", exoid);
	ex_err("ex_get_coord",errmsg,exerrval);
	return (EX_FATAL);
      }
    } else {
      coordidz = 0;
    }

    /* write out the coordinates  */
    for (i=0; i<num_dim; i++)
      {
        void *coor;
        char *which;
        int status;
       
        if (i == 0) {
          coor = x_coor;
          which = "X";
          coordid = coordidx;
        } else if (i == 1) {
          coor = y_coor;
          which = "Y";
          coordid = coordidy;
        } else if (i == 2) {
          coor = z_coor;
          which = "Z";
          coordid = coordidz;
        }

        if (coor != NULL && coordid != 0) {
          if (ex_comp_ws(exoid) == 4) {
            status = nc_get_var_float(exoid, coordid, coor); 
          } else {
            status = nc_get_var_double(exoid, coordid, coor);
          }
          
          if (status != NC_NOERR) {
	    exerrval = status;
	    sprintf(errmsg,
		    "Error: failed to get %s coord array in file id %d", which, exoid);
	    ex_err("ex_put_coord",errmsg,exerrval);
	    return (EX_FATAL);
	  }
        }
      }
  }
  return (EX_NOERR);
}