readme.txt

NE-STR750各部分的程序

/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 03/10/2006
* Description        : Description of the TB Example.
********************************************************************************
* History:
* 06/20/2007 : V1.1
* The document is modified by New-Embed Co.Ltd(http://wwww.2embed.com) to fit the NE-STR750F board.
* 07/17/2006 : V1.0
* 03/10/2006 : V0.1 
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
This example show how to configure the TB peripheral in Timing mode to generate
a time base equal to 2 ms.

The CK_TIM frequency is set to 60 MHz, the TB is running at 250 KHz and the
Update period is equal to 2 ms.

On each Update event, an interrupt is generated and the leds connected to P0.08,
P0.12 and P0.09 pins are toggled with different frequencies respectively equal
to 10 Hz, 1 Hz and 2 Hz.


Directory contents
==================
75x_conf.h  Library Configuration file
75x_it.c    Interrupt handlers
main.c      Main program


Hardware environment
====================
 - Connect three leds to pins P0.08, P0.12 and P0.09(respectively LD4, LD2 and
   LD3 on NE-STR750F board).


How to use it
=============
In order to make the program work, you must do the following :
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 75x_lib.c
  + 75x_tb.c
  + 75x_gpio.c
  + 75x_mrcc.c
  + 75x_eic.c
  + 75x_cfg.c

- Link all compiled files and load your image into either RAM or Flash
- Run the example


******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE******