prwaitbar.m

一个强大的统计模式识别工具箱

%PRWAITBAR Report PRTools progress by single waitbar
%
%   H = PRWAITBAR(N,M,TEXT)
%   H = PRWAITBAR(N,TEXT,FLAG)
%   S = PRWAITBAR
%
% INPUT
%   N      Integer, total number of steps in loop
%   M      Integer, progress in number of steps in loop
%   TEXT   Text to be displayed in waitbar
%   FLAG   Flag (0/1)
%
% OUTPUT
%   H      Waitbar handle
%   S      Status PRWAITBAR ('on' or 'off')
%
% DESCRIPTION
% This routine may be used to report progress in PRTools experiments.
% It detects and integrates levels of loops. The following calls are
% supported:
%
% 	PRWAITBAR(N,TEXT)          initialize loop
% 	PRWAITBAR(N,TEXT,FLAG)     initialize loop if FLAG == 1
%   PRWAITBAR(N,M)             update progress
%   PRWAITBAR(N,M,TEXT)        update info
%   PRWAITBAR(0)               closes loop level
%   PRWAITBAR OFF              removes waitbar
%   PRWAITBAR ON               switches waitbar on again
%   PRWAITBAR                  reset prwaitbar
%
% A typical sequence of calls is:
%    .....
%    prtwaitbar(nfolds,'cross validation')
%    for j = 1:nfolds
%        prtwaitbar(nfolds,j,['cross validation, fold ' int2str(j)])
%        ....
%    end
%    prtwairbar(0)
%    .....
% Calls to PRTWAITBAR may be nested and all progress is merged into a single
% waitbar. In this PRWAITBAR differs from Matlab's WAITBAR.
% A typical example can be visualised by:
%
%    crossval({gendatb,gendath},{svc,loglc,fisherc},5,2)
%
% SEE ALSO
% PRPROGRESS

% Copyright: R.P.W. Duin, [e-mail]
% Faculty EWI, Delft University of Technology
% P.O. Box 5031, 2600 GA Delft, The Netherlands

function varargout = prwaitbar(n,m,text)

persistent N                % array, N(DEPTH) is the loop size at level DEPTH
persistent M                % array, M(DEPTH) is the present counter values at level DEPTH
persistent DEPTH            % nesting DEPTH
persistent WHANDLE          % handle of the waitbar
persistent MESS             % cell array with message to be displayed at level DEPTH
persistent STAT             % flag, if STAT = 0, PRWAITBAR is switched off
persistent WPOS             % position of the waitbar on the screen
persistent FNAME            % cell array with names of the calling routine at level DEPTH
persistent DOIT             % flag that may switch off tracking progress at deeper levels
persistent NSKIP            % level at which tracking progress has been switched off
persistent OLDPROG          % previous progress


if isempty(DEPTH)           % initialisation of persistent variables
	DEPTH = 0;
	MESS = cell(1,10);
	FNAME = cell(1,10);
	STAT = 1;
	DOIT = 1;
end

decrease_depth = 0;
if nargin == 0                            % ---- call: prwaitbar ----
	if nargout == 0
		prwaitbar off
		DEPTH = 0;
		STAT = 1;
		DOIT = 1;
	else                                    % ---- call: out = prwaitbar ----
		if nargout == 1
			if STAT == 0, varargout = {'off'};
			else varargout = {'on'};
			end
		else
			varargout = {WHANDLE,N,M,DEPTH,MESS,STAT,WPOS,FNAME,DOIT,NSKIP};
		end
		return
	end
	
elseif nargin == 1
	
	if isstr(n) & strcmp(n,'off')           % ---- call: prwaitbar off ----
		
		if ~isempty(WHANDLE) & ishandle(WHANDLE)
			WPOS = get(WHANDLE,'position');     % save position as user likes it
			close(WHANDLE);
		end
		N = []; M = []; DEPTH = 0;            % set variables at initial values
		WHANDLE = [];
		MESS = cell(1,10); 
		STAT = 0;
		return
		
	elseif isstr(n) & strcmp(n,'on')        % ---- call: prwaitbar on ----
		STAT = 1;                            % restart waitbar
		DEPTH = [];
		return
		
	elseif n == 0 & STAT                    % ---- call: prwaitbar(0) ----
		if ~DOIT 
			if (NSKIP == DEPTH)                 % we are back at the right level, so
				DOIT = 1;                         % restart tracking progress
			end
			DEPTH = DEPTH - 1;
			return
		end
		M(DEPTH) = N(DEPTH);                % loop almost ready
		decrease_depth = 1;                 % decrease depth after plotting progress
	else
		return
	end
	
elseif ~STAT                            % next commands can be skipped if switched off
	return
	
elseif nargin == 2
	
	if isstr(m)                           % ---- call: prwaitbar(n,text) ----
		                                    % note: this is a typical call to
		                                    % start a waitbar cycle
		
		DEPTH = DEPTH + 1;                  % we nest one level deeper
		if ~DOIT                            % skip if we sont track progress
			return
		end 
		
		err = lasterror;                    
		% we have to find out whether we continue a proper set of prwaitbar calls, or whether
	  % we have to recover from some error or possible interrupt and have to re-initialise 
		% the admin
	
		if ~strcmp(err.message,'##')         % yes, restart after interrupt
			prwaitbar;
			DEPTH = 1;
		end
		                                     % find the name of the calling routine
    [ss,ii] = dbstack;
    [path,name] = fileparts(ss(2).name);
		if strcmp(name,mfilename)            % search deeper in case of internal call
    	[path,name] = fileparts(ss(3).name);
		end
    FNAME{DEPTH} = name;                 % store it, and display it in waitbar
 	  set(WHANDLE,'name',['                         PRWAITBAR:   ' name]);
		
		N(DEPTH) = n;                        % complete the admin
		M(DEPTH) = 0;
		MESS{DEPTH} = m;                     % note: m contains text
		
	elseif DOIT                            % ---- call: prwaitbar(n,m) ----
		DEPTH = max(DEPTH,1);                % store admin
		N(DEPTH) = n;
		M(DEPTH) = m-1;                      % store m-1, assuming call is in the start of loop
	else                                   % skip and return if progress should not be reported
		return
	end
	
elseif nargin == 3
	
	if isstr(m)                            % ---- call: prwaitbat(n,text,flag) ----
		if ~DOIT                             % there is a flag, but we already skip progress               
			DEPTH = DEPTH + 1;                 % just keep track of loop nesting.
		else                                 % we are in reporting mode  
			DOIT = (text > 0);                 % check flag 
			if ~DOIT                           % stop progress reporting!!!
				DEPTH = DEPTH + 1;               % keep track of loop nesting
				NSKIP = DEPTH;                   % store level
			else                               % flag does not apply,
				prwaitbar(n,m);                  % just print waitbar
			end
		end
		return
		
	else                                   % ---- call: prwaitbar(n,m,text) ----
		
		if ~DOIT                             % skip progress report if needed
			return
		end
		
		if isempty(WHANDLE)                  % switch waitbar on if needed
			prwaitbar;                         % this only happens if the loop is not properly opened
		end
		N(DEPTH) = n;                        % update admin
		M(DEPTH) = m-1;
		MESS{DEPTH} = text;
	end
end

if ~STAT | ~DOIT                         % dont display, (just to be sure)
	return
end

% waitbar creation and display

if isempty(WHANDLE)                      % if no waitbar, make one
	
	s = sprintf(' \n \n \n' );             % room for 4 levels of text
	h = waitbar(0,s);                      % create waitbar
  OLDPROG = 0;
	if DEPTH == 0, fnam = [];
	else, fnam = FNAME{DEPTH}; end         % retrieve name of calling routine
 	set(h,'name',['                         PRWAITBAR:   ' fnam])
	WHANDLE = h;
	
	err.message = '##';                    % store for proper continuation in next call
	lasterror(err);
	
	if ~isempty(WPOS)                      % if we have a position
		set(h,'position',WPOS);              % apply it
	else                                   % otherwise
		WPOS = get(h,'position');            % get it
	end
	
end
	
progress = 0;                            % progress
if DEPTH == 0                            % still on level zero
	s = sprintf(' \n \n \n' );             % no message
else
	for j=DEPTH:-1:1                       % run over all levels for progress
		progress = (progress + M(j))/(N(j)); % compute total progress
	end
	s = wtext(MESS,N,DEPTH);               % construct message
end

significant = (progress - OLDPROG >= 0.005);
if ishandle(WHANDLE)
  if significant                            % show significant updates only                
	  waitbar(progress,WHANDLE,s);            % update waitbar
    OLDPROG = progress;
  end
else                                      % handle was not proper (anymore)
	WHANDLE = waitbar(progress,s);          % reconstruct waitbar
  OLDPROG = progress;
end

if decrease_depth                         % update admin
	DEPTH = DEPTH - 1;
	if DEPTH == 0                           % take care that new waitbar starts fresh
		err.message = '';
		lasterror(err);
		WPOS = get(WHANDLE,'position');       % but in old position
    delete(WHANDLE);
  else
    if significant
   	  set(WHANDLE,'name',['                         PRWAITBAR:   ' FNAME{DEPTH}]);
    end
	end
end

if nargout > 0
	varargout = {WHANDLE};
end

return

function s = wtext(MESS,N,DEPTH)

	t = cell(1,DEPTH);
	n = 0;
	for j=1:DEPTH
		if N(j) > 1
			n = n+1;
			t{n} = MESS{j};
		end
	end

	if n == 0
		s = sprintf([' \n \n \n \n ']);
	elseif n == 1
		s = sprintf([' \n \n' t{1} '\n ']);
	elseif n == 2
		s = sprintf([' \n' t{1} '\n' t{2} '\n ']);
	elseif n == 3
		s = sprintf([' \n' t{1} '\n' t{2} '\n' t{3}]);
	else
		s = sprintf([t{n-3} '\n' t{n-2} '\n' t{n-1} '\n' t{n}]);
	end
	
return