msp430pc.h

基于MSP430单片机的菜单级无限通信程序

#define uchar      unsigned char
#define uint       unsigned int
#define ulong      unsigned long

#define ALARM_POUT          P4OUT     //声光报警
#define ALARM_PDIR          P4DIR

#define LCD_BACK_PxOUT       P4OUT   // 液晶背光灯 p4.2
#define LCD_BACK_PxDIR       P4DIR
#define LED_BACK             0x04

#define TI_CC_LED1_PxOUT      P3OUT  //预警灯 绿  p3.7
#define TI_CC_LED1_PxDIR      P3DIR
#define TI_CC_LED1            0x80

#define TI_CC_LED2_PxOUT      P4OUT  //报警灯 红  p4.0
#define TI_CC_LED2_PxDIR      P4DIR
#define TI_CC_LED2            0x01

#define  BUZZ_PxOUT           P4OUT  //蜂鸣器      p4.1
#define  BUZZ_PxDIR           P4DIR
#define  BUZZ                 0X02

#define USART_DIR P3DIR            //串口引脚     
#define USART_SEL P3SEL            //复用引脚设置为串口引脚
#define USART_IN  P3IN
#define USART_OUT P3OUT
#define UTXD0 BIT4                // 串口发送数据引脚   p3.4
#define URXD0 BIT5                // 串口接收数据引脚   p3.5
#define UDE   BIT6                // 接收或发送使能引脚 p3.6 UDE = 1 接收 ,UDE = 0 发送  

uint CRC16(uchar *,uint );
void AddUsData(unsigned char );
void SetBaoErr(void);
void DoUart(void);
void alarm(void);
void DoCommand(uchar);
void ask_pc(void);
void send_pc_com(unsigned char,unsigned char);
void send_pc_data(unsigned char);
void send_cc2500(unsigned char,unsigned char ,unsigned char );
void UartInit(void);
void SendUart(unsigned char *,unsigned char );
void do_2500Data(void); 
void SetAddMod(void);