jtd0.vhd

交通灯程序,实现十字路口的交通灯控制. 使用max+plus2编写的.

library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;

use ieee.std_logic_unsigned.all;
entity jtd0 is
port(clk: in std_logic;
    reset: in std_logic;
    --led7s: out std_logic_vector( 6 downto 0);
     pout: out std_logic_vector(12 downto 1));
end jtd0;
architecture traffic of jtd0 is
signal er,ey,eg: std_logic;
signal sr,sy,sg: std_logic;
signal wr,wy,wg: std_logic;
signal nr,ny,ng: std_logic;
signal count: integer range 0 to 11;
signal state: integer range 0 to 4;
begin
process(clk,reset,count)
begin
if reset='1' then
count<=0;
state<=0;
   elsif(clk'event and clk='1') then
   count<=count+1;
     if(count=11) then
     --count<=0;
     state<=state+1;
        if(state>4) then 
        state<=0;
        end if;
     end if;
end if;
       
case state is
when 0=>ey<='1'; wy<='1'; sy<='1'; ny<='1';
        eg<='0'; wg<='0'; sg<='0'; ng<='0';
        er<='0'; wr<='0'; sr<='0'; nr<='0';

when 1=>ey<='0'; wy<='0'; sy<='0'; ny<='0';
        eg<='1'; wg<='1'; sg<='0'; ng<='0';
        er<='0'; wr<='0'; sr<='1'; nr<='1';

when 2=>ey<='1'; wy<='1'; sy<='0'; ny<='0';
        eg<='1'; wg<='1'; sg<='0'; ng<='0';
        er<='0'; wr<='0'; sr<='1'; nr<='1';

when 3=>ey<='0'; wy<='0'; sy<='0'; ny<='0';
        eg<='0'; wg<='0'; sg<='1'; ng<='1';
        er<='1'; wr<='1'; sr<='0'; nr<='0';

when 4=>ey<='0'; wy<='0'; sy<='1'; ny<='1';
        eg<='0'; wg<='0'; sg<='1'; ng<='1';
        er<='1'; wr<='1'; sr<='0'; nr<='0';
when others=>null;
end case;

end process;
pout(1)<=er; pout(2)<=eg; pout(3)<=ey;
pout(4)<=sr; pout(5)<=sg; pout(6)<=sy;
pout(7)<=wr; pout(8)<=wg; pout(9)<=wy;
pout(10)<=nr; pout(11)<=ng; pout(12)<=ny;
end traffic;