jtd0.fit

交通灯程序,实现十字路口的交通灯控制. 使用max+plus2编写的.

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 12/04/2008 10:14:43      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "jtd0"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "reset"                        : INPUT_PIN  = 2      ;
    "pout1"                        : OUTPUT_PIN = 23     ;
    "pout2"                        : OUTPUT_PIN = 50     ;
    "pout3"                        : OUTPUT_PIN = 78     ;
    "pout4"                        : OUTPUT_PIN = 65     ;
    "pout5"                        : OUTPUT_PIN = 66     ;
    "pout6"                        : OUTPUT_PIN = 25     ;
    "pout7"                        : OUTPUT_PIN = 21     ;
    "pout8"                        : OUTPUT_PIN = 22     ;
    "pout9"                        : OUTPUT_PIN = 80     ;
    "pout10"                       : OUTPUT_PIN = 51     ;
    "pout11"                       : OUTPUT_PIN = 24     ;
    "pout12"                       : OUTPUT_PIN = 64     ;
    ":15"                          : LOCATION   = LC4_B19;  -- count3
    ":16"                          : LOCATION   = LC5_B19;  -- count2
    ":17"                          : LOCATION   = LC6_B19;  -- count1
    ":18"                          : LOCATION   = LC7_B19;  -- count0
    ":19"                          : LOCATION   = LC2_B19;  -- state2
    ":20"                          : LOCATION   = LC1_B19;  -- state1
    ":21"                          : LOCATION   = LC3_B19;  -- state0
    ":310"                         : LOCATION   = LC8_B19;
    ":588"                         : LOCATION   = LC6_B23;
    ":603"                         : LOCATION   = LC1_B23;
    ":618"                         : LOCATION   = LC8_B18;
    ":633"                         : LOCATION   = LC7_B18;
    ":695"                         : LOCATION   = LC4_B18;
    "~695~1"                       : LOCATION   = LC3_B18;
    "~695~2"                       : LOCATION   = LC1_B18;
    "~695~3"                       : LOCATION   = LC6_B18;
    ":755"                         : LOCATION   = LC5_B18;
    "~755~1"                       : LOCATION   = LC5_B23;
    "~755~2"                       : LOCATION   = LC2_B23;
    "~755~3"                       : LOCATION   = LC2_B18;

END;

INTERNAL_INFO "jtd0"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC4_B19,->LC5_B19,->LC6_B19,->LC7_B19,->LC2_B19,->LC1_B19,->LC3_B19|";
    OD1P2   : LORAX = "1:FB1->LC4_B19,->LC5_B19,->LC6_B19,->LC7_B19,->LC2_B19,->LC1_B19,->LC3_B19|";
    LC2_B19 : LORAX = "1:MSW1R1C18,HHR8R1|2:PA14R1C17->LC8_B18,->LC7_B18,->LC3_B18,->LC1_B18,->LC6_B18,->LC4_B18,->LC2_B18,->LC5_B18|,2:PA14R1C22->LC6_B23,->LC1_B23,->LC5_B23,->LC2_B23||";
    LC1_B19 : LORAX = "1:MSW0R1C18,HHR22R1|2:PA2R1C17->LC8_B18,->LC7_B18,->LC3_B18,->LC1_B18,->LC6_B18,->LC4_B18,->LC2_B18,->LC5_B18|,2:PA2R1C22->LC5_B23,->LC2_B23||";
    LC3_B19 : LORAX = "1:MSW2R1C18,HHR3R1|2:PA19R1C17->LC8_B18,->LC7_B18,->LC3_B18,->LC1_B18,->LC6_B18,->LC4_B18,->LC2_B18,->LC5_B18|,2:PA19R1C22->LC6_B23,->LC1_B23,->LC5_B23,->LC2_B23||";
    LC6_B23 : LORAX = "1:MSW5R1C23,V15C23->OV0C23P78|";
    LC1_B23 : LORAX = "1:MSW0R1C22,V2C22->OV0C22P80|";
    LC8_B18 : LORAX = "1:MSW7R1C17,G88R1->OH15R1P25|";
    LC7_B18 : LORAX = "1:MSW6R1C17,HHR24R1->OH6R1P64|";
    LC3_B18 : LORAX = "1:MSW2R1C17,HHR15R1->OH2R1P66|";
    LC1_B18 : LORAX = "1:MSW0R1C17,G43R1->OH8R1P21|";
    LC6_B18 : LORAX = "1:MSW5R1C17,G89R1->OH13R1P24|";
    LC4_B18 : LORAX = "1:MSW3R1C17,G1R1->OH11R1P23|";
    LC5_B23 : LORAX = "1:MSW4R1C22,HHR44R1->OH4R1P65|";
    LC2_B23 : LORAX = "1:MSW1R1C22,G16R1->OH9R1P22|";
    LC2_B18 : LORAX = "1:MSW1R1C17,V3C17->OV2C17P51|";
    LC5_B18 : LORAX = "1:MSW5R1C16,V17C16->OV3C16P50|";
	LC4_B19 : LORAX2 = "LC4_B19, LC6_B19, LC5_B19, LC7_B19";
	LC5_B19 : LORAX2 = "X, LC6_B19, LC5_B19, LC7_B19";
	LC6_B19 : LORAX2 = "X, X, LC6_B19, LC7_B19";
	LC7_B19 : LORAX2 = "X, X, X, LC7_B19";
	LC2_B19 : LORAX2 = "LC8_B19, LC1_B19, LC2_B19, LC3_B19";
	LC1_B19 : LORAX2 = "LC8_B19, LC1_B19, LC3_B19, LC2_B19";
	LC3_B19 : LORAX2 = "LC8_B19, LC1_B19, LC3_B19, LC2_B19";
	LC8_B19 : LORAX2 = "LC4_B19, LC6_B19, LC5_B19, LC7_B19";
	LC6_B23 : LORAX2 = "X, X, LC3_B19, LC2_B19";
	LC1_B23 : LORAX2 = "X, X, LC3_B19, LC2_B19";
	LC8_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC7_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC3_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC1_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC6_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC4_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC5_B23 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC2_B23 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC2_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
	LC5_B18 : LORAX2 = "X, LC1_B19, LC3_B19, LC2_B19";
END;