hi.dat

gps数据处理软件--GAMIT

# File: hi.dat  Format version 1.0  (keep the version number in columns 32-24 of line 1) 
# Table of mechanical offsets between measured height-of-instrument (HI) and the antenna reference point (ARP) 
# Entries last added by rwk 061218; correction to ASHDMG entries by S Shimada and rwk 061228 
# Correction to ROGSNR and ROGRMA entries by S. Hreinsdottir and rwk 070102
#
# Non-blank first column is a comment
# Comments can follow within the line (unread)  
#
# Some antennas have equivalences coded in gamit/lib/hisub.f and are given here only once.
# If the antenna you want is not in the equivalence, list, however, you can add it to the table.  
# A warning will be issued for entries missing from the table, and offsets set = 0.
# station.info entries of L1PHC or UNKNWN DHARP are both given 0. offsets with no warning.
#                                                                                                
# Format (1x,a20,1x,a6,1x,f6.4,1x,f6.4)
# 20-char RINEX code  6-char GAMIT code   5-char HI code  vert offset (m)   horiz offset (m)
 JPLD/M_R             ROGSNR DHARP 0.     0.     ! ARP is bottom of choke ring / base of antenna
 JPLD/M_R             ROGSNR DHBCR 0.     0.     ! direct ht to bottom of choke ring            
 JPLD/M_R             ROGSNR DHTCR 0.0699 0.     ! direct ht to top of choke ring (JPL)         
 JPLD/M_R             ROGSNR SLBCR 0.     0.1905 ! slant height to bottom edge of choke ring    

 JPLD/M_RA_SOP        ROGRMA DHARP 0.     0.     ! ARP is bottom of choke ring / base of antenna
 JPLD/M_RA_SOP        ROGRMA DHBCR 0.     0.     ! direct ht to bottom of choke ring            
 JPLD/M_RA_SOP        ROGRMA DHTCR 0.0699 0.     ! direct ht to top of choke ring (JPL)         
 JPLD/M_RA_SOP        ROGRMA SLBCR 0.     0.1905 ! slant height to bottom edge of choke ring    
                          
 AOAD/M_B             ROGAOA DHARP 0.     0.     ! ARP is bottom of choke ring  
 AOAD/M_B             ROGAOA DHPAB -0.011 0.     ! direct ht to bottom of pre-amp (below choke ring)
 AOAD/M_B             ROGAOA DHBCR 0.     0.     ! direct ht to bottom of choke ring            
 AOAD/M_B             ROGAOA DHTCR 0.0699 0.     ! direct ht to top of choke ring (JPL)         
 AOAD/M_B             ROGAOA SLBCR 0.     0.1755 ! slant height to bottom edge of choke ring    
    
 AOAD/M_TA_NGS        TRBMTA DHARP 0.     0.     ! ARP is bottom of choke ring                  
 AOAD/M_TA_NGS        TRBMTA DHPAB -0.011 0.     ! direct ht to bottom of pre-amp (below choke r 
 AOAD/M_TA_NGS        TRBMTA DHBCR 0.     0.     ! direct ht to bottom of choke ring             
 AOAD/M_TA_NGS        TRBMTA DHTCR 0.0699 0.     ! direct ht to top of choke ring (JPL)          
 AOAD/M_TA_NGS        TRBMTA SLBCR 0.     0.1755 ! slant height to bottom edge of choke ring    

 AOAD/M_T             TRBROG DHARP 0.     0.     ! ARP is bottom of pre-amp
 AOAD/M_T             TRBROG DHBCR 0.035  0.     ! direct ht to bottom of choke ring          
 AOAD/M_T             TRBROG DHTCR 0.1016 0.     ! direct ht to top of choke ring (JPL)       
 AOAD/M_T             TRBROG SLBCR 0.035  0.1905 ! slant height to bottom edge of choke ring  
      
 AOARASCAL            AOARAS DHARP 0.     0.     ! ARP is bottom of mounting screw (NGS)
 AOARASCAL            AOARAS DHBCR 0.0417 0.     ! direct ht to bottom of outer cylinder       
 AOARASCAL            AOARAS SLBCR 0.0417 0.070  ! slant ht to lower corner of outer cylinder  

 ASH700228A           ASHL12 DHARP 0.     0.     ! ARP is bottom of pre-amp   
 ASH700228A           ASHL12 DHBGP 0.060  0.     ! direct height to bottom of ground plane 
 ASH700228A           ASHL12 DHTGP 0.064  0.     ! direct height to top of ground plane          
 ASH700228A           ASHL12 SLAGP 0.064  0.115  ! slant ht to top outside of holes in ground plane   
 ASH700228A           ASHL12 SLAGP 0.0514 0.143  ! slant ht to bevel at outermost edge of ground plane  

 ASH700228B           ATGEOB DHARP 0.     0.     ! ARP is bottom of pre-amp   
 ASH700228B           ATGEOB DHBGP 0.060  0.     ! direct height to bottom of ground plane 
 ASH700228B           ATGEOB DHTGP 0.064  0.     ! direct height to top of ground plane          
 ASH700228B           ATGEOB SLAGP 0.064  0.115  ! slant ht to top outside of holes in ground plane   
 ASH700228B           ATGEOB SLAGP 0.0514 0.143  ! slant ht to bevel at outermost edge of ground plane  

 ASH700228C           ATGEOC DHARP 0.     0.     ! ARP is bottom of pre-amp   
 ASH700228C           ATGEOC DHBGP 0.060  0.     ! direct height to bottom of ground plane 
 ASH700228C           ATGEOC DHTGP 0.064  0.     ! direct height to top of ground plane          
 ASH700228C           ATGEOC SLAGP 0.064  0.115  ! slant ht to top outside of holes in ground plane   
 ASH700228C           ATGEOC SLAGP 0.0514 0.143  ! slant ht to bevel at outermost edge of ground plane  
                   
 ASH700228D           ASHP12 DHARP 0.     0.     ! ARP is bottom of pre-amp
 ASH700228D           ASHP12 SLHGP 0.064  0.1318 ! slant ht to inside of holes in  ground plane   
 ASH700228D           ASHP12 SLBGP 0.0543 0.143  ! slant ht to bevel of bottom edge of ground plan
   
 ASH700228A+EX        ASHLEX DHARP 0.     0.     ! ARP is bottom of pre-amp     
 ASH700228A+EX        ASHLEX DHBGP 0.060  0.     ! direct height to bottom of ground plane    
 ASH700228A+EX        ASHLEX DHTGP 0.064  0.     ! direct height to top of ground plane       
                
# The following cover most versions of the Ashtech "whopper": ASHGD3 ASHG3R ASHGDA ATGE3B ATGE33 ATGE3A ATGEA1
 ASH700718A           ASHGD3 DHARP 0.     0.     ! ARP is
 ASH700718A           ASHGD3 DHTGP 0.065  0.     ! direct height to top of ground plane         
 ASH700718A           ASHGD3 SLHGP 0.065  0.1737 ! slant ht to outside of holes in ground plane          
 ASH700718A           ASHGD3 SLLGP 0.065  0.184  ! slant height outside of ground plane    

 ASH701008.01B        ATIIIA DHARP 0.     0.     ! ARP is
 ASH701008.01B        ATIIIA DHTGP 0.065  0.     ! direct height to top of ground plane         
 ASH701008.01B        ATIIIA SLHGP 0.065  0.1737 ! slant ht to outside of holes in ground plane          
 ASH701008.01B        ATIIIA SLLGP 0.065  0.184  ! slant height outside of ground plane    
                   
# The following cover most Ashtech choke rings: ASHDMG ASHDMC ATDMCB ATDMCD ATDMCF ATDMRA ATDMRE ATDMRB
#                                               ATDM1C ATDM1E ATDMGG ASHGG3 ATGGD1 ATGGDA ATDMG2
 ASH700936A_M         ASHDMG DHARP 0.     0.     ! ARP is bottom of pre-amp base
 ASH700936A_M         ASHDMG DHBCR 0.0348 0.     ! direct height to bottom of choke rings
 ASH700936A_M         ASHDMG SLBCR 0.0348 0.1897 ! slant height to bottom of choke rings 
 ASH700936A_M         ASHDMG DHTCR 0.1008 0.     ! direct height to top of choke rings          
 
 ASH701073.1          ASHGG1 DHARP 0.     0.     ! ARP is bottom of pre-amp base

 ASH701975.01A        ATGD4A DHARP 0.     0.     ! ARP is bottom of pre-amp base
 ASH701975.01B        ATGD4B DHARP 0.     0.     ! ARP is bottom of pre-amp base
                                              
 ASH701975.01Agp      ATGD4A DHARP 0.     0.     ! ARP is bottom of pre-amp base
 ASH701975.01Agp      ATGD4A SLHGP 0.043  0.200  ! slant height to top inside of holes in GP  
 ASH701975.01Agp      ATGD4A SLTGP 0.043  0.2032 ! slant height to top outside edge of GP     
 ASH701975.01Agp      ATGD4A SLBGP 0.040  0.2032 ! slant height to bottom outside edge of GP  

 ASH701975.01Bgp      ATGD4B DHARP 0.     0.     ! ARP is bottom of pre-amp base
 ASH701975.01Bgp      ATGD4B SLHGP 0.043  0.200  ! slant height to top inside of holes in GP  
 ASH701975.01Bgp      ATGD4B SLTGP 0.043  0.2032 ! slant height to top outside edge of GP     
 ASH701975.01Bgp      ATGD4B SLBGP 0.040  0.2032 ! slant height to bottom outside edge of GP  
    
# The following cover all version of the Ashtech dual-freq marine antenna: ATMR2A ATMR2B ATMR2C 
 ASH700700.A          ATMR2A DHARP 0.     0.     ! ARP is bottom of pre-amp base
 ASH700700.A          ATMR2A DHBDN 0.035  0      ! direct height to black dots in notch       
 ASH700700.A          ATMR2A SLBDN 0.035  0.109  ! slant height to black dots in notch        
 
 ASHMAR/RANGE         ASHMAR DHARP 0.     0.     ! ARP is bottom of pre-amp base
                        
 ASH701073.1          ASHGG1 DHARP 0.     0.     ! ARP is

 ASH110454            ATPROM DHARP 0.     0.     ! ARP is bottom of preamp (NGS)
 ASH110454            ATPROM SLBGP 0.0356 0.092  ! slant ht to bottom of black edge of GP  
 ASH110454            ATPROM SLTGP 0.0516 0.092  ! slant ht to top of black edge of GP 

 THA_ZMAX+RCVR        THAZMX DHARP 0.     0.     ! ARP is  
 THA800961+REC        THAZMX DHARP 0.     0.     |   
 THA800961+RTK        THAZRT DHARP 0.     0.     |  
 THA800961RECUHF      THAZMU DHARP 0.     0.     |      
 THA800961RTKUHF      THARTU DHARP 0.     0. 

   
 AERAT2775_43         AERCHK DHARP 0.     0.     ! ARP is
 AERAT2775_62         AERA62 DHARP 0.     0.     ! ARP is
 AERAT2775_16         AER160 DHARP 0.     0.     ! ARP is

 GEO200               GEO200 DHARP 0.     0.     ! ARP is
 GEO220               GEO220 DHARP 0.     0.     ! ARP is 
                                 
 SPP571908273         GEOCHR DHARP 0.     0.     ! ARP is bottom of choke ring
 SPP571908273         GEOCHR SLBCR 0.     0.186    slant height to bottom edge of choke ring

 SPP571212238+GP      SPP8GP DHARP 0.     0.     ! ARP is
            
 JPSLEGANT_E          JP_LEG DHARP 0.     0.     ! ARP is bottom of pre-amp base
 JPSLEGANT_E          JP_LEG SLWPC 0.0328 0.1215 ! slant ht to widest point of casing 
                    
 JPSREGANT_SD_E       JPRSDE DHARP 0.     0.     ! ARP is
 JPSREGANT_SD_E       JPRSDE SLWPC 0.0585 0.1855 ! slant ht to widest point of casing 

 JPSREGANT_DD_E       JPRDDE DHARP 0.     0.     ! ARP is
 JPSREGANT_DD_E       JPRDDE SLWPC 0.0585 0.1855 ! slant ht to widest point of casing 

 JPSREGANT_DD_I       JPRDDE DHARP 0.     0.     ! ARP is
 JPSREGANT_DD_I       JPRDDE SLWPC 0.0585 0.1855   slant ht to widest point of casing 

 JPSREGANT_SD_I       JPRSDI L1PHC 0.     0.     ! ARP is        
 JPSREGANT_SD_I       JPRDDI L1PHC 0.     0.     ! ARP is        

 JNSMARANT_GGD        JNSMAR DHARP 0.     0.     ! ARP is
 JNSMARANT_GGD        JNSMAR SLTGP 0.0606 0.0700 ! slant ht to top edge of ground plane    
 JNSMARANT_GGD        JNSMAR SLBGP 0.0576 0.0700 ! slant ht to bottom edge of ground plane 
           
# The following cover most of the Leica antennas with GRT 44 carrier and height hook:
#        LC_201 LC299I LC399I LC_201 LC202N LC202G LC302G LC302N
 LEIAT201             LC_201 DHARP 0.     0.     ! ARP is
 LEIAT201             LC_201 DHHHK 0.345  0.     ! direct height w/ height hook tape 
                               
# The following applies also to the LC_303 with radome (LC303R)
 LEIAT303             LC_303 DHARP 0.     0.     ! ARP is bottom of choke rings         
 LEIAT303             LC_303 DHBCR 0.     0.     ! direct height to bottom of choke rings
 LEIAT303             LC_303 DHHHK 0.345  0.     ! direct height w/ height hook tape 
 LEIAT303             LC_303 SLBCR 0.     0.1525 ! slant height to bottom of choke rings 

 LEIAT501             LC_501 DHARP 0.     0.     ! ARP is bottom of pre-amp          
 LEIAT501             LC_501 DHHHK 0.360  0.     ! direct height w/ height hook tape 

 LEIAT502             LC_502 DHARP 0.     0.     ! ARP is bottom of pre-amp    
 LEIAT502             LC_502 DHHHK 0.360  0.     ! direct height w/ height hook tape 

 LEIAT503             LC_503 DHARP 0.     0.     ! ARP is bottom of choke rings      
 LEIAT503             LC_503 DHBCR 0.     0.     ! direct height to bottom of choke rings   
 LEIAT503             LC_503 DHHHK 0.360  0.     ! direct height w/ height hook tape 
 LEIAT503             LC_503 SLBCR 0.0    0.1525 ! slant height ot bottom of choke rings    

 LEIAT504             LC_504 DHARP 0.     0.     ! ARP is bottom of pre-amp    
 LEIAT504             LC_504 DHBCR 0.0378 0.     ! direct height to bottom of choke rings 
 LEIAT504             LC_504 DHHHK 0.360  0.     ! direct height w/ height hook tape 
 LEIAT504             LC_504 SLBCR 0.0378 0.1897 ! slant height ot bottom of choke rings    

 LEIAX1202            LC1202 DHARP 0.     0.     ! ARP is       
 LEIAX1202GG          LC02GG DHARP 0.     0.     ! ARP is     
 LEIAX1230GG          LC30GG DHARP 0.     0.     ! ARP is       
                       
 MPLL1/L2_SURV        MPLL12 DHARP 0.     0.     ! ARP is
 MPL1230              MPLCHR DHARP 0.     0.     ! ARP is
 MPREGP MP-1372W      MPREGP DHARP 0.     0.     ! ARP is
 MP-1372FW+REGP       MPREGW DHARP 0.     0.     ! ARP is
 MPL_WAAS_2224NW      MPLWNW DHARP 0.     0.     ! ARP is

 MAG105645            MAG645 DHARP 0.     0.     ! ARP is

 MACRII               MACRII DHARP 0.     0.     ! ARP is bottom of pre-amp base 
                     
 MINXDP               MINXDP DHARP 0.     0.     ! ARP is bottom of pre-amp base 
                       
 NAVAN2004T           AN2004 DHARP 0.     0.     ! ARP is
 NAVAN2004T           AN2004 DHBGP 0.0239 0.     ! direct ht to bottom outer edge of radome