jdmerge.c

MCB2300_ucgui_LCD320240.rar LPC2368的uc/gui的移植

/*
 * jdmerge.c
 *
 * Copyright (C) 1994-1996, Thomas G. Lane.
 * This file is part of the Independent JPEG Group's software.
 * For conditions of distribution and use, see the accompanying README file.
 *
 * This file contains code for merged upsampling/color conversion.
 *
 * This file combines functions from jdsample.c and jdcolor.c;
 * read those files first to understand what's going on.
 *
 * When the chroma components are to be upsampled by simple replication
 * (ie, box filtering), we can save some work in color conversion by
 * calculating all the output pixels corresponding to a pair of chroma
 * samples at one time.  In the conversion equations
 *	R = Y   		+ K1 * Cr
 *	G = Y + K2 * Cb + K3 * Cr
 *	B = Y + K4 * Cb
 * only the Y term varies among the group of pixels corresponding to a pair
 * of chroma samples, so the rest of the terms can be calculated just once.
 * At typical sampling ratios, this eliminates half or three-quarters of the
 * multiplications needed for color conversion.
 *
 * This file currently provides implementations for the following cases:
 *	YCbCr => RGB color conversion only.
 *	Sampling ratios of 2h1v or 2h2v.
 *	No scaling needed at upsample time.
 *	Corner-aligned (non-CCIR601) sampling alignment.
 * Other special cases could be added, but in most applications these are
 * the only common cases.  (For uncommon cases we fall back on the more
 * general code in jdsample.c and jdcolor.c.)
 */

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"

#ifdef UPSAMPLE_MERGING_SUPPORTED


/* Private subobject */

typedef struct
{
	struct jpeg_upsampler	pub;	/* public fields */

	/* Pointer to routine to do actual upsampling/conversion of one row group */
							JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
	JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
	JSAMPARRAY output_buf));

	/* Private state for YCC->RGB conversion */
	int						*Cr_r_tab;		/* => table for Cr to R conversion */
	int						*Cb_b_tab;		/* => table for Cb to B conversion */
	INT32					*Cr_g_tab;		/* => table for Cr to G conversion */
	INT32					*Cb_g_tab;		/* => table for Cb to G conversion */

	/* For 2:1 vertical sampling, we produce two output rows at a time.
	 * We need a "spare" row buffer to hold the second output row if the
	 * application provides just a one-row buffer; we also use the spare
	 * to discard the dummy last row if the image height is odd.
	 */
	JSAMPROW				spare_row;
	boolean					spare_full;		/* T if spare buffer is occupied */

	JDIMENSION				out_row_width;	/* samples per output row */
	JDIMENSION				rows_to_go;	/* counts rows remaining in image */
} my_upsampler;

typedef my_upsampler * my_upsample_ptr;

#define SCALEBITS	16	/* speediest right-shift on some machines */
#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))


/*
 * Initialize tables for YCC->RGB colorspace conversion.
 * This is taken directly from jdcolor.c; see that file for more info.
 */

LOCAL(void)
build_ycc_rgb_table(j_decompress_ptr cinfo)
{
	my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
	int i;
	INT32 x;
	SHIFT_TEMPS

	upsample->Cr_r_tab = (int *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE + 1) * SIZEOF(int));
	upsample->Cb_b_tab = (int *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE + 1) * SIZEOF(int));
	upsample->Cr_g_tab = (INT32 *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE + 1) * SIZEOF(INT32));
	upsample->Cb_g_tab = (INT32 *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE + 1) * SIZEOF(INT32));

	for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++)
	{
		/* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
		/* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
		/* Cr=>R value is nearest int to 1.40200 * x */
		upsample->Cr_r_tab[i] = (int) RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
		/* Cb=>B value is nearest int to 1.77200 * x */
		upsample->Cb_b_tab[i] = (int) RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
		/* Cr=>G value is scaled-up -0.71414 * x */
		upsample->Cr_g_tab[i] = (-FIX(0.71414)) * x;
		/* Cb=>G value is scaled-up -0.34414 * x */
		/* We also add in ONE_HALF so that need not do it in inner loop */
		upsample->Cb_g_tab[i] = (-FIX(0.34414)) * x + ONE_HALF;
	}
}


/*
 * Initialize for an upsampling pass.
 */

METHODDEF(void)
start_pass_merged_upsample(j_decompress_ptr cinfo)
{
	my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;

	/* Mark the spare buffer empty */
	upsample->spare_full = FALSE;
	/* Initialize total-height counter for detecting bottom of image */
	upsample->rows_to_go = cinfo->output_height;
}


/*
 * Control routine to do upsampling (and color conversion).
 *
 * The control routine just handles the row buffering considerations.
 */

METHODDEF(void)
merged_2v_upsample(j_decompress_ptr cinfo, JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, JDIMENSION in_row_groups_avail, JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)
/* 2:1 vertical sampling case: may need a spare row. */
{
	my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
	JSAMPROW work_ptrs[2];
	JDIMENSION num_rows;		/* number of rows returned to caller */

	GUI_USE_PARA(in_row_groups_avail);
	if (upsample->spare_full)
	{
		/* If we have a spare row saved from a previous cycle, just return it. */
		jcopy_sample_rows(&upsample->spare_row, 0, output_buf + *out_row_ctr, 0, 1, upsample->out_row_width);
		num_rows = 1;
		upsample->spare_full = FALSE;
	}
	else
	{
		/* Figure number of rows to return to caller. */
		num_rows = 2;
		/* Not more than the distance to the end of the image. */
		if (num_rows > upsample->rows_to_go)
		{
			num_rows = upsample->rows_to_go;
		}
		/* And not more than what the client can accept: */
		out_rows_avail -= *out_row_ctr;
		if (num_rows > out_rows_avail)
		{
			num_rows = out_rows_avail;
		}
		/* Create output pointer array for upsampler. */
		work_ptrs[0] = output_buf[*out_row_ctr];
		if (num_rows > 1)
		{
			work_ptrs[1] = output_buf[*out_row_ctr + 1];
		}
		else
		{
			work_ptrs[1] = upsample->spare_row;
			upsample->spare_full = TRUE;
		}
		/* Now do the upsampling. */
		(*upsample->upmethod) (cinfo, input_buf, * in_row_group_ctr, work_ptrs);
	}

	/* Adjust counts */
	*out_row_ctr += num_rows;
	upsample->rows_to_go -= num_rows;
	/* When the buffer is emptied, declare this input row group consumed */
	if (!upsample->spare_full)
	{
		(*in_row_group_ctr)++;
	}
}


METHODDEF(void)
merged_1v_upsample(j_decompress_ptr cinfo, JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, JDIMENSION in_row_groups_avail, JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)
/* 1:1 vertical sampling case: much easier, never need a spare row. */
{
	my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;

	GUI_USE_PARA(out_rows_avail);
	GUI_USE_PARA(in_row_groups_avail);
	/* Just do the upsampling. */
	(*upsample->upmethod) (cinfo, input_buf, * in_row_group_ctr, output_buf + *out_row_ctr);
	/* Adjust counts */
	(*out_row_ctr)++;
	(*in_row_group_ctr)++;
}


/*
 * These are the routines invoked by the control routines to do
 * the actual upsampling/conversion.  One row group is processed per call.
 *
 * Note: since we may be writing directly into application-supplied buffers,
 * we have to be honest about the output width; we can't assume the buffer
 * has been rounded up to an even width.
 */


/*
 * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
 */

METHODDEF(void)
h2v1_merged_upsample(j_decompress_ptr cinfo, JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, JSAMPARRAY output_buf)
{
	my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
	register int y, cred, cgreen, cblue;
	int cb, cr;
	register JSAMPROW outptr;
	JSAMPROW inptr0, inptr1, inptr2;
	JDIMENSION col;
	/* copy these pointers into registers if possible */
	register JSAMPLE * range_limit = cinfo->sample_range_limit;
	int * Crrtab = upsample->Cr_r_tab;
	int * Cbbtab = upsample->Cb_b_tab;
	INT32 * Crgtab = upsample->Cr_g_tab;
	INT32 * Cbgtab = upsample->Cb_g_tab;
	SHIFT_TEMPS

	inptr0 = input_buf[0][in_row_group_ctr];
	inptr1 = input_buf[1][in_row_group_ctr];
	inptr2 = input_buf[2][in_row_group_ctr];
	outptr = output_buf[0];
	/* Loop for each pair of output pixels */
	for (col = cinfo->output_width >> 1; col > 0; col--)
	{
		/* Do the chroma part of the calculation */
		cb = GETJSAMPLE(*inptr1++);
		cr = GETJSAMPLE(*inptr2++);
		cred = Crrtab[cr];
		cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
		cblue = Cbbtab[cb];
		/* Fetch 2 Y values and emit 2 pixels */
		y = GETJSAMPLE(*inptr0++);
		outptr[RGB_RED] = range_limit[y + cred];
		outptr[RGB_GREEN] = range_limit[y + cgreen];
		outptr[RGB_BLUE] = range_limit[y + cblue];
		outptr += RGB_PIXELSIZE;
		y = GETJSAMPLE(*inptr0++);
		outptr[RGB_RED] = range_limit[y + cred];
		outptr[RGB_GREEN] = range_limit[y + cgreen];
		outptr[RGB_BLUE] = range_limit[y + cblue];
		outptr += RGB_PIXELSIZE;
	}
	/* If image width is odd, do the last output column separately */
	if (cinfo->output_width & 1)
	{
		cb = GETJSAMPLE(*inptr1);
		cr = GETJSAMPLE(*inptr2);
		cred = Crrtab[cr];
		cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
		cblue = Cbbtab[cb];
		y = GETJSAMPLE(*inptr0);
		outptr[RGB_RED] = range_limit[y + cred];
		outptr[RGB_GREEN] = range_limit[y + cgreen];
		outptr[RGB_BLUE] = range_limit[y + cblue];
	}
}


/*
 * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
 */

METHODDEF(void)
h2v2_merged_upsample(j_decompress_ptr cinfo, JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, JSAMPARRAY output_buf)
{
	my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
	register int y, cred, cgreen, cblue;
	int cb, cr;
	register JSAMPROW outptr0, outptr1;
	JSAMPROW inptr00, inptr01, inptr1, inptr2;
	JDIMENSION col;
	/* copy these pointers into registers if possible */
	register JSAMPLE * range_limit = cinfo->sample_range_limit;
	int * Crrtab = upsample->Cr_r_tab;
	int * Cbbtab = upsample->Cb_b_tab;
	INT32 * Crgtab = upsample->Cr_g_tab;
	INT32 * Cbgtab = upsample->Cb_g_tab;
	SHIFT_TEMPS

	inptr00 = input_buf[0][in_row_group_ctr*2];
	inptr01 = input_buf[0][in_row_group_ctr * 2 + 1];
	inptr1 = input_buf[1][in_row_group_ctr];
	inptr2 = input_buf[2][in_row_group_ctr];
	outptr0 = output_buf[0];
	outptr1 = output_buf[1];
	/* Loop for each group of output pixels */
	for (col = cinfo->output_width >> 1; col > 0; col--)
	{
		/* Do the chroma part of the calculation */
		cb = GETJSAMPLE(*inptr1++);
		cr = GETJSAMPLE(*inptr2++);
		cred = Crrtab[cr];
		cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
		cblue = Cbbtab[cb];
		/* Fetch 4 Y values and emit 4 pixels */
		y = GETJSAMPLE(*inptr00++);
		outptr0[RGB_RED] = range_limit[y + cred];
		outptr0[RGB_GREEN] = range_limit[y + cgreen];
		outptr0[RGB_BLUE] = range_limit[y + cblue];
		outptr0 += RGB_PIXELSIZE;
		y = GETJSAMPLE(*inptr00++);
		outptr0[RGB_RED] = range_limit[y + cred];
		outptr0[RGB_GREEN] = range_limit[y + cgreen];
		outptr0[RGB_BLUE] = range_limit[y + cblue];
		outptr0 += RGB_PIXELSIZE;
		y = GETJSAMPLE(*inptr01++);
		outptr1[RGB_RED] = range_limit[y + cred];
		outptr1[RGB_GREEN] = range_limit[y + cgreen];
		outptr1[RGB_BLUE] = range_limit[y + cblue];
		outptr1 += RGB_PIXELSIZE;
		y = GETJSAMPLE(*inptr01++);
		outptr1[RGB_RED] = range_limit[y + cred];
		outptr1[RGB_GREEN] = range_limit[y + cgreen];
		outptr1[RGB_BLUE] = range_limit[y + cblue];
		outptr1 += RGB_PIXELSIZE;
	}
	/* If image width is odd, do the last output column separately */
	if (cinfo->output_width & 1)
	{
		cb = GETJSAMPLE(*inptr1);
		cr = GETJSAMPLE(*inptr2);
		cred = Crrtab[cr];
		cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
		cblue = Cbbtab[cb];
		y = GETJSAMPLE(*inptr00);
		outptr0[RGB_RED] = range_limit[y + cred];
		outptr0[RGB_GREEN] = range_limit[y + cgreen];
		outptr0[RGB_BLUE] = range_limit[y + cblue];
		y = GETJSAMPLE(*inptr01);
		outptr1[RGB_RED] = range_limit[y + cred];
		outptr1[RGB_GREEN] = range_limit[y + cgreen];
		outptr1[RGB_BLUE] = range_limit[y + cblue];
	}
}


/*
 * Module initialization routine for merged upsampling/color conversion.
 *
 * NB: this is called under the conditions determined by use_merged_upsample()
 * in jdmaster.c.  That routine MUST correspond to the actual capabilities
 * of this module; no safety checks are made here.
 */

GLOBAL(void)
jinit_merged_upsampler(j_decompress_ptr cinfo)
{
	my_upsample_ptr upsample;

	upsample = (my_upsample_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_upsampler));
	cinfo->upsample = (struct jpeg_upsampler *) upsample;
	upsample->pub.start_pass = start_pass_merged_upsample;
	upsample->pub.need_context_rows = FALSE;

	upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;

	if (cinfo->max_v_samp_factor == 2)
	{
		upsample->pub.upsample = merged_2v_upsample;
		upsample->upmethod = h2v2_merged_upsample;
		/* Allocate a spare row buffer */
		upsample->spare_row = (JSAMPROW) (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
	}
	else
	{
		upsample->pub.upsample = merged_1v_upsample;
		upsample->upmethod = h2v1_merged_upsample;
		/* No spare row needed */
		upsample->spare_row = NULL;
	}

	build_ycc_rgb_table(cinfo);
}

#endif /* UPSAMPLE_MERGING_SUPPORTED */