ttls.c

freeradius-server-2.1.3.tar.gz安装源文件

	 *	NOT 'eap start', so we should check for that....
	 */
	switch (reply->code) {
	case PW_AUTHENTICATION_ACK:
		RDEBUG("Got tunneled Access-Accept");

		rcode = RLM_MODULE_OK;

		/*
		 *	MS-CHAP2-Success means that we do NOT return
		 *	an Access-Accept, but instead tunnel that
		 *	attribute to the client, and keep going with
		 *	the TTLS session.  Once the client accepts
		 *	our identity, it will respond with an empty
		 *	packet, and we will send EAP-Success.
		 */
		vp = NULL;
		pairmove2(&vp, &reply->vps, PW_MSCHAP2_SUCCESS);
		if (vp) {
			RDEBUG("Got MS-CHAP2-Success, tunneling it to the client in a challenge.");
			rcode = RLM_MODULE_HANDLED;
			t->authenticated = TRUE;

			/*
			 *	Delete MPPE keys & encryption policy.  We don't
			 *	want these here.
			 */
			pairdelete(&reply->vps, ((311 << 16) | 7));
			pairdelete(&reply->vps, ((311 << 16) | 8));
			pairdelete(&reply->vps, ((311 << 16) | 16));
			pairdelete(&reply->vps, ((311 << 16) | 17));

			/*
			 *	Use the tunneled reply, but not now.
			 */
			if (t->use_tunneled_reply) {
				t->reply = reply->vps;
				reply->vps = NULL;
			}

		} else { /* no MS-CHAP2-Success */
			/*
			 *	Can only have EAP-Message if there's
			 *	no MS-CHAP2-Success.  (FIXME: EAP-MSCHAP?)
			 *
			 *	We also do NOT tunnel the EAP-Success
			 *	attribute back to the client, as the client
			 *	can figure it out, from the non-tunneled
			 *	EAP-Success packet.
			 */
			pairmove2(&vp, &reply->vps, PW_EAP_MESSAGE);
			pairfree(&vp);
		}

		/*
		 *	Handle the ACK, by tunneling any necessary reply
		 *	VP's back to the client.
		 */
		if (vp) {
			vp2diameter(request, tls_session, vp);
			pairfree(&vp);
		}

		/*
		 *	If we've been told to use the attributes from
		 *	the reply, then do so.
		 *
		 *	WARNING: This may leak information about the
		 *	tunneled user!
		 */
		if (t->use_tunneled_reply) {
			pairdelete(&reply->vps, PW_PROXY_STATE);
			pairadd(&request->reply->vps, reply->vps);
			reply->vps = NULL;
		}
		break;


	case PW_AUTHENTICATION_REJECT:
		RDEBUG("Got tunneled Access-Reject");
		rcode = RLM_MODULE_REJECT;
		break;

		/*
		 *	Handle Access-Challenge, but only if we
		 *	send tunneled reply data.  This is because
		 *	an Access-Challenge means that we MUST tunnel
		 *	a Reply-Message to the client.
		 */
	case PW_ACCESS_CHALLENGE:
		RDEBUG("Got tunneled Access-Challenge");

		/*
		 *	Keep the State attribute, if necessary.
		 *
		 *	Get rid of the old State, too.
		 */
		pairfree(&t->state);
		pairmove2(&t->state, &reply->vps, PW_STATE);

		/*
		 *	We should really be a bit smarter about this,
		 *	and move over only those attributes which
		 *	are relevant to the authentication request,
		 *	but that's a lot more work, and this "dumb"
		 *	method works in 99.9% of the situations.
		 */
		vp = NULL;
		pairmove2(&vp, &reply->vps, PW_EAP_MESSAGE);

		/*
		 *	There MUST be a Reply-Message in the challenge,
		 *	which we tunnel back to the client.
		 *
		 *	If there isn't one in the reply VP's, then
		 *	we MUST create one, with an empty string as
		 *	it's value.
		 */
		pairmove2(&vp, &reply->vps, PW_REPLY_MESSAGE);

		/*
		 *	Handle the ACK, by tunneling any necessary reply
		 *	VP's back to the client.
		 */
		if (vp) {
			vp2diameter(request, tls_session, vp);
			pairfree(&vp);
		}
		rcode = RLM_MODULE_HANDLED;
		break;

	default:
		RDEBUG("Unknown RADIUS packet type %d: rejecting tunneled user", reply->code);
		rcode = RLM_MODULE_INVALID;
		break;
	}

	return rcode;
}


/*
 *	Do post-proxy processing,
 */
static int eapttls_postproxy(EAP_HANDLER *handler, void *data)
{
	int rcode;
	tls_session_t *tls_session = (tls_session_t *) data;
	REQUEST *fake, *request = handler->request;

	RDEBUG("Passing reply from proxy back into the tunnel.");

	/*
	 *	If there was a fake request associated with the proxied
	 *	request, do more processing of it.
	 */
	fake = (REQUEST *) request_data_get(handler->request,
					    handler->request->proxy,
					    REQUEST_DATA_EAP_MSCHAP_TUNNEL_CALLBACK);

	/*
	 *	Do the callback, if it exists, and if it was a success.
	 */
	if (fake && (handler->request->proxy_reply->code == PW_AUTHENTICATION_ACK)) {
		/*
		 *	Terrible hacks.
		 */
		rad_assert(fake->packet == NULL);
		fake->packet = request->proxy;
		fake->packet->src_ipaddr = request->packet->src_ipaddr;
		request->proxy = NULL;

		rad_assert(fake->reply == NULL);
		fake->reply = request->proxy_reply;
		request->proxy_reply = NULL;

		if ((debug_flag > 0) && fr_log_fp) {
			fprintf(fr_log_fp, "server %s {\n",
				(fake->server == NULL) ? "" : fake->server);
		}

		/*
		 *	Perform a post-auth stage for the tunneled
		 *	session.
		 */
		fake->options &= ~RAD_REQUEST_OPTION_PROXY_EAP;
		rcode = rad_postauth(fake);
		RDEBUG2("post-auth returns %d", rcode);

		if ((debug_flag > 0) && fr_log_fp) {
			fprintf(fr_log_fp, "} # server %s\n",
				(fake->server == NULL) ? "" : fake->server);
			
			RDEBUG("Final reply from tunneled session code %d",
			       fake->reply->code);
			debug_pair_list(fake->reply->vps);
		}

		/*
		 *	Terrible hacks.
		 */
		request->proxy = fake->packet;
		fake->packet = NULL;
		request->proxy_reply = fake->reply;
		fake->reply = NULL;

		/*
		 *	And we're done with this request.
		 */

		switch (rcode) {
                case RLM_MODULE_FAIL:
			request_free(&fake);
			eaptls_fail(handler, 0);
			return 0;
			break;

                default:  /* Don't Do Anything */
			RDEBUG2("sGot reply %d",
			       request->proxy_reply->code);
			break;
		}
	}
	request_free(&fake);	/* robust if fake == NULL */

	/*
	 *	Process the reply from the home server.
	 */
	rcode = process_reply(handler, tls_session, handler->request,
			      handler->request->proxy_reply);

	/*
	 *	The proxy code uses the reply from the home server as
	 *	the basis for the reply to the NAS.  We don't want that,
	 *	so we toss it, after we've had our way with it.
	 */
	pairfree(&handler->request->proxy_reply->vps);

	switch (rcode) {
	case RLM_MODULE_REJECT:
		RDEBUG("Reply was rejected");
		break;

	case RLM_MODULE_HANDLED:
		RDEBUG("Reply was handled");
		eaptls_request(handler->eap_ds, tls_session);
		return 1;

	case RLM_MODULE_OK:
		RDEBUG("Reply was OK");

		/*
		 *	Success: Automatically return MPPE keys.
		 */
		return eaptls_success(handler, 0);

	default:
		RDEBUG("Reply was unknown.");
		break;
	}

	eaptls_fail(handler, 0);
	return 0;
}


/*
 *	Free a request.
 */
static void my_request_free(void *data)
{
	REQUEST *request = (REQUEST *)data;

	request_free(&request);
}


/*
 *	Process the "diameter" contents of the tunneled data.
 */
int eapttls_process(EAP_HANDLER *handler, tls_session_t *tls_session)
{
	int rcode = PW_AUTHENTICATION_REJECT;
	REQUEST *fake;
	VALUE_PAIR *vp;
	ttls_tunnel_t *t;
	const uint8_t *data;
	size_t data_len;
	REQUEST *request = handler->request;

	/*
	 *	Just look at the buffer directly, without doing
	 *	record_minus.
	 */
	data_len = tls_session->clean_out.used;
	tls_session->clean_out.used = 0;
	data = tls_session->clean_out.data;

	t = (ttls_tunnel_t *) tls_session->opaque;

	/*
	 *	If there's no data, maybe this is an ACK to an
	 *	MS-CHAP2-Success.
	 */
	if (data_len == 0) {
		if (t->authenticated) {
			RDEBUG("Got ACK, and the user was already authenticated.");
			return PW_AUTHENTICATION_ACK;
		} /* else no session, no data, die. */

		/*
		 *	FIXME: Call SSL_get_error() to see what went
		 *	wrong.
		 */
		RDEBUG2("SSL_read Error");
		return PW_AUTHENTICATION_REJECT;
	}

#ifndef NDEBUG
	if ((debug_flag > 2) && fr_log_fp) {
		size_t i;

		for (i = 0; i < data_len; i++) {
			if ((i & 0x0f) == 0) fprintf(fr_log_fp, "  TTLS tunnel data in %04x: ", i);

			fprintf(fr_log_fp, "%02x ", data[i]);

			if ((i & 0x0f) == 0x0f) fprintf(fr_log_fp, "\n");
		}
		if ((data_len & 0x0f) != 0) fprintf(fr_log_fp, "\n");
	}
#endif

	if (!diameter_verify(request, data, data_len)) {
		return PW_AUTHENTICATION_REJECT;
	}

	/*
	 *	Allocate a fake REQUEST structe.
	 */
	fake = request_alloc_fake(request);

	rad_assert(fake->packet->vps == NULL);

	/*
	 *	Add the tunneled attributes to the fake request.
	 */
	fake->packet->vps = diameter2vp(request, tls_session->ssl, data, data_len);
	if (!fake->packet->vps) {
		request_free(&fake);
		return PW_AUTHENTICATION_REJECT;
	}

	/*
	 *	Tell the request that it's a fake one.
	 */
	vp = pairmake("Freeradius-Proxied-To", "127.0.0.1", T_OP_EQ);
	if (vp) {
		pairadd(&fake->packet->vps, vp);
	}

	if ((debug_flag > 0) && fr_log_fp) {
		RDEBUG("Got tunneled request");

		debug_pair_list(fake->packet->vps);
	}

	/*
	 *	Update other items in the REQUEST data structure.
	 */
	fake->username = pairfind(fake->packet->vps, PW_USER_NAME);
	fake->password = pairfind(fake->packet->vps, PW_USER_PASSWORD);

	/*
	 *	No User-Name, try to create one from stored data.
	 */
	if (!fake->username) {
		/*
		 *	No User-Name in the stored data, look for
		 *	an EAP-Identity, and pull it out of there.
		 */
		if (!t->username) {
			vp = pairfind(fake->packet->vps, PW_EAP_MESSAGE);
			if (vp &&
			    (vp->length >= EAP_HEADER_LEN + 2) &&
			    (vp->vp_strvalue[0] == PW_EAP_RESPONSE) &&
			    (vp->vp_strvalue[EAP_HEADER_LEN] == PW_EAP_IDENTITY) &&
			    (vp->vp_strvalue[EAP_HEADER_LEN + 1] != 0)) {
				/*
				 *	Create & remember a User-Name
				 */
				t->username = pairmake("User-Name", "", T_OP_EQ);
				rad_assert(t->username != NULL);

				memcpy(t->username->vp_strvalue, vp->vp_strvalue + 5,
				       vp->length - 5);
				t->username->length = vp->length - 5;
				t->username->vp_strvalue[t->username->length] = 0;

				RDEBUG("Got tunneled identity of %s",
				       t->username->vp_strvalue);

				/*
				 *	If there's a default EAP type,
				 *	set it here.
				 */
				if (t->default_eap_type != 0) {
					RDEBUG("Setting default EAP type for tunneled EAP session.");
					vp = paircreate(PW_EAP_TYPE,
							PW_TYPE_INTEGER);
					rad_assert(vp != NULL);
					vp->vp_integer = t->default_eap_type;
					pairadd(&fake->config_items, vp);
				}

			} else {
				/*
				 *	Don't reject the request outright,
				 *	as it's permitted to do EAP without
				 *	user-name.
				 */
				RDEBUG2("WARNING! No EAP-Identity found to start EAP conversation.");
			}
		} /* else there WAS a t->username */

		if (t->username) {
			vp = paircopy(t->username);
			pairadd(&fake->packet->vps, vp);
			fake->username = pairfind(fake->packet->vps, PW_USER_NAME);
		}
	} /* else the request ALREADY had a User-Name */

	/*
	 *	Add the State attribute, too, if it exists.
	 */
	if (t->state) {
		vp = paircopy(t->state);
		if (vp) pairadd(&fake->packet->vps, vp);
	}

	/*
	 *	If this is set, we copy SOME of the request attributes
	 *	from outside of the tunnel to inside of the tunnel.
	 *
	 *	We copy ONLY those attributes which do NOT already
	 *	exist in the tunneled request.
	 */
	if (t->copy_request_to_tunnel) {
		VALUE_PAIR *copy;

		for (vp = request->packet->vps; vp != NULL; vp = vp->next) {
			/*
			 *	The attribute is a server-side thingy,
			 *	don't copy it.
			 */
			if ((vp->attribute > 255) &&
			    (((vp->attribute >> 16) & 0xffff) == 0)) {
				continue;
			}

			/*
			 *	The outside attribute is already in the
			 *	tunnel, don't copy it.
			 *
			 *	This works for BOTH attributes which
			 *	are originally in the tunneled request,
			 *	AND attributes which are copied there
			 *	from below.
			 */
			if (pairfind(fake->packet->vps, vp->attribute)) {
				continue;
			}

			/*
			 *	Some attributes are handled specially.
			 */
			switch (vp->attribute) {
				/*
				 *	NEVER copy Message-Authenticator,
				 *	EAP-Message, or State.  They're
				 *	only for outside of the tunnel.
				 */
			case PW_USER_NAME:
			case PW_USER_PASSWORD:
			case PW_CHAP_PASSWORD:
			case PW_CHAP_CHALLENGE:
			case PW_PROXY_STATE:
			case PW_MESSAGE_AUTHENTICATOR:
			case PW_EAP_MESSAGE:
			case PW_STATE:
				continue;
				break;

				/*
				 *	By default, copy it over.
				 */
			default:
				break;
			}

			/*
			 *	Don't copy from the head, we've already
			 *	checked it.
			 */
			copy = paircopy2(vp, vp->attribute);
			pairadd(&fake->packet->vps, copy);
		}
	}

	if ((vp = pairfind(request->config_items, PW_VIRTUAL_SERVER)) != NULL) {
		fake->server = vp->vp_strvalue;

	} else if (t->virtual_server) {
		fake->server = t->virtual_server;

	} /* else fake->server == request->server */


	if ((debug_flag > 0) && fr_log_fp) {
		RDEBUG("Sending tunneled request");

		debug_pair_list(fake->packet->vps);

		fprintf(fr_log_fp, "server %s {\n",
			(fake->server == NULL) ? "" : fake->server);
	}

	/*
	 *	Call authentication recursively, which will
	 *	do PAP, CHAP, MS-CHAP, etc.
	 */
	rad_authenticate(fake);

	/*
	 *	Note that we don't do *anything* with the reply
	 *	attributes.
	 */
	if ((debug_flag > 0) && fr_log_fp) {
		fprintf(fr_log_fp, "} # server %s\n",
			(fake->server == NULL) ? "" : fake->server);

		RDEBUG("Got tunneled reply code %d", fake->reply->code);
		
		debug_pair_list(fake->reply->vps);
	}

	/*
	 *	Decide what to do with the reply.
	 */
	switch (fake->reply->code) {
	case 0:			/* No reply code, must be proxied... */
		vp = pairfind(fake->config_items, PW_PROXY_TO_REALM);
		if (vp) {
			eap_tunnel_data_t *tunnel;
			RDEBUG("Tunneled authentication will be proxied to %s", vp->vp_strvalue);

			/*
			 *	Tell the original request that it's going
			 *	to be proxied.
			 */
			pairmove2(&(request->config_items),
				  &(fake->config_items),
				  PW_PROXY_TO_REALM);

			/*
			 *	Seed the proxy packet with the
			 *	tunneled request.
			 */
			rad_assert(request->proxy == NULL);
			request->proxy = fake->packet;
			fake->packet = NULL;
			rad_free(&fake->reply);
			fake->reply = NULL;

			/*
			 *	Set up the callbacks for the tunnel
			 */
			tunnel = rad_malloc(sizeof(*tunnel));
			memset(tunnel, 0, sizeof(*tunnel));

			tunnel->tls_session = tls_session;
			tunnel->callback = eapttls_postproxy;

			/*
			 *	Associate the callback with the request.
			 */
			rcode = request_data_add(request,
						 request->proxy,
						 REQUEST_DATA_EAP_TUNNEL_CALLBACK,
						 tunnel, free);
			rad_assert(rcode == 0);

			/*
			 *	rlm_eap.c has taken care of associating
			 *	the handler with the fake request.
			 *
			 *	So we associate the fake request with
			 *	this request.
			 */
			rcode = request_data_add(request,
						 request->proxy,
						 REQUEST_DATA_EAP_MSCHAP_TUNNEL_CALLBACK,
						 fake, my_request_free);
			rad_assert(rcode == 0);
			fake = NULL;

			/*
			 *	Didn't authenticate the packet, but
			 *	we're proxying it.
			 */
			rcode = PW_STATUS_CLIENT;

		} else {
			RDEBUG("No tunneled reply was found for request %d , and the request was not proxied: rejecting the user.",
			       request->number);
			rcode = PW_AUTHENTICATION_REJECT;
		}
		break;

	default:
		/*
		 *	Returns RLM_MODULE_FOO, and we want to return
		 *	PW_FOO
		 */
		rcode = process_reply(handler, tls_session, request,
				      fake->reply);
		switch (rcode) {
		case RLM_MODULE_REJECT:
			rcode = PW_AUTHENTICATION_REJECT;
			break;

		case RLM_MODULE_HANDLED:
			rcode = PW_ACCESS_CHALLENGE;
			break;

		case RLM_MODULE_OK:
			rcode = PW_AUTHENTICATION_ACK;
			break;

		default:
			rcode = PW_AUTHENTICATION_REJECT;
			break;
		}
		break;
	}

	request_free(&fake);

	return rcode;
}