📄 bl_nfi.h
字号:
/*****************************************************************************
* Copyright Statement:
* --------------------
* This software is protected by Copyright and the information contained
* herein is confidential. The software may not be copied and the information
* contained herein may not be used or disclosed except with the written
* permission of MediaTek Inc. (C) 2005
*
* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*****************************************************************************
*
* Filename:
* ---------
* bl_NFI.h
*
* Project:
* --------
* NFB - Bootloader
*
* Description:
* ------------
* Item test - NANDFlash test.
*
* Author:
* -------
* -------
*
*============================================================================
* HISTORY
* Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
*------------------------------------------------------------------------------
* removed!
* removed!
* removed!
*
* removed!
* removed!
* removed!
*
* removed!
* removed!
* removed!
*
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
* removed!
*------------------------------------------------------------------------------
* Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
*============================================================================
****************************************************************************/
#ifndef _BOOTLOADER_NFI_H
#define _BOOTLOADER_NFI_H
/* Register definition */
#define NFI_base (0x80090000)
#define NFI_ACCCON ((volatile kal_uint16 *)(NFI_base+0x0000))
#define NFI_PAGEFMT ((volatile kal_uint16 *)(NFI_base+0x0004))
#define NFI_OPCON ((volatile kal_uint16 *)(NFI_base+0x0008))
#define NFI_CMD ((volatile kal_uint16 *)(NFI_base+0x000C))
#define NFI_ADDNOB ((volatile kal_uint16 *)(NFI_base+0x0010))
#define NFI_ADDRL ((volatile kal_uint32 *)(NFI_base+0x0014))
#define NFI_ADDRM ((volatile kal_uint16 *)(NFI_base+0x0018))
#define NFI_DATAW ((volatile kal_uint32 *)(NFI_base+0x001C))
#define NFI_DATAWB ((volatile kal_uint16 *)(NFI_base+0x0020))
#define NFI_DATAR ((volatile kal_uint32 *)(NFI_base+0x0024))
#define NFI_DATARB ((volatile kal_uint16 *)(NFI_base+0x0028))
#define NFI_PSTA ((volatile kal_uint16 *)(NFI_base+0x002C))
#define NFI_FIFOCON ((volatile kal_uint16 *)(NFI_base+0x0030))
#define NFI_CON ((volatile kal_uint16 *)(NFI_base+0x0034))
#define NFI_INTR ((volatile kal_uint16 *)(NFI_base+0x0038))
#define NFI_INTR_EN ((volatile kal_uint16 *)(NFI_base+0x003C))
#define NFI_PAGECNTR ((volatile kal_uint16 *)(NFI_base+0x0040))
#define NFI_ADDRCNTR ((volatile kal_uint16 *)(NFI_base+0x0044))
#define NFI_SYM0_ADDR ((volatile kal_uint16 *)(NFI_base+0x0050))
#define NFI_SYM1_ADDR ((volatile kal_uint16 *)(NFI_base+0x0054))
#define NFI_SYM2_ADDR ((volatile kal_uint16 *)(NFI_base+0x0058))
#define NFI_SYM3_ADDR ((volatile kal_uint16 *)(NFI_base+0x005C))
#define NFI_SYM0_DAT ((volatile kal_uint32 *)(NFI_base+0x0060))
#define NFI_SYM1_DAT ((volatile kal_uint32 *)(NFI_base+0x0064))
#define NFI_SYM2_DAT ((volatile kal_uint32 *)(NFI_base+0x0068))
#define NFI_SYM3_DAT ((volatile kal_uint32 *)(NFI_base+0x006C))
#define NFI_ERRDET ((volatile kal_uint16 *)(NFI_base+0x0070))
#define NFI_PAR0 ((volatile kal_uint16 *)(NFI_base+0x0080))
#define NFI_PAR1 ((volatile kal_uint16 *)(NFI_base+0x0084))
#define NFI_PAR2 ((volatile kal_uint16 *)(NFI_base+0x0088))
#define NFI_PAR3 ((volatile kal_uint16 *)(NFI_base+0x008C))
#define NFI_PAR4 ((volatile kal_uint16 *)(NFI_base+0x0090))
#define NFI_PAR5 ((volatile kal_uint16 *)(NFI_base+0x0094))
#define NFI_PAR6 ((volatile kal_uint16 *)(NFI_base+0x0098))
#define NFI_PAR7 ((volatile kal_uint16 *)(NFI_base+0x009C))
#define NFI_CSEL ((volatile kal_uint16 *)(NFI_base+0x0100))
/*******************************************************************************
* NFI register definition
*******************************************************************************/
/* NFI_ACCCON */
#define ACCCON 0x07C6 // C2R=111, W2R=11, WH=00, WST=00, RLT=10
/* NFI_PAGEFMT */
//#define PAGEFMT_512 0x0020
//#define PAGEFMT_2K 0x0125
#define PAGEFMT_512 0x0000
#define PAGEFMT_2K 0x0005
#define PAGEFMT_8BITS 0x0000
#define PAGEFMT_16BITS 0x0100
/* NFI_OPCON */
#define BURST_RD 0x0001
#define BURST_WR 0x0002
#define ECC_RD_INIT 0x0010
#define ECC_WR_INIT 0x0020
#define SINGLE_RD 0x0100
#define NOB_BYTE 0x1000
#define NOB_WORD 0x2000
#define NOB_DWORD 0x0000
/* Nand flash command */
#define RD_1ST_CMD 0x00
#define RD_2ND_HALF_CMD 0x01 // only for 512 bytes page-size
#define RD_SPARE_CMD 0x50 // only for 512 bytes page-size
#define RD_2ND_CYCLE_CMD 0x30 // only for 2K bytes page-size
#define INPUT_DATA_CMD 0x80
#define PROG_DATA_CMD 0x10
#define BLOCK_ERASE1_CMD 0x60
#define BLOCK_ERASE2_CMD 0xD0
#define RD_ID_CMD 0x90
#define RD_STATUS_CMD 0x70
#define RESET_CMD 0xFF
/* NFI_PSTA */
#define STATUS_CMD 0x1
#define STATUS_ADDR 0x2
#define STATUS_DATAR 0x4
#define STATUS_DATAW 0x8
#define STATUS_BUSY 0x100
/* NFI_FIFOCON */
#define RD_EMPTY_MASK 0x001
#define RD_FULL_MASK 0x002
#define WR_EMPTY_MASK 0x004
#define WR_FULL_MASK 0x008
#define FIFO_FLUSH 0x010
#define RESET 0x020
/* NFI_CON */
#define BYTE_RW_EN 0x8000
#define MULTIPAGE_CON 0x0800
#define READ_CON_EN 0x0400
#define PROGRAM_CON_EN 0x0200
#define ERASE_CON_EN 0x0100
#define SW_PROGSPARE_EN 0x0020
#define MULTI_PAGE_RD_EN 0x0010
#define AUTOECC_ENC_EN 0x0008
#define AUTOECC_DEC_EN 0x0004
#define DMA_WR_EN 0x0002
#define DMA_RD_EN 0x0001
/* NFI_CSEL */
#define DEVICE_512 0x00
#define DEVICE_2K 0x01
/* Status register */
#define RDY_BUSY 0x40
#define PASS_FAIL 0x01
/* NFI_INTR_EN */
#define RD_COMPLETE_EN 0x01
#define WR_COMPLETE_EN 0x02
#define RESET_COMPLETE_EN 0x04
#define ERASE_COMPLETE_EN 0x08
#define ERR_DET_EN 0x10
#define ERR_COR_EN 0x20
#define BUSY_RETURN_EN 0x40
#define ALL_EN 0x7F
/* NFI_INTR */
#define RD_COMPLETE 0x0001
#define WR_COMPLETE 0x0002
#define RESET_COMPLETE 0x0004
#define ERASE_COMPLETE 0x0008
#define ERR_DET0 0x0010
#define ERR_DET1 0x0020
#define ERR_DET2 0x0040
#define ERR_DET3 0x0080
#define ERR_COR0 0x0100
#define ERR_COR1 0x0200
#define ERR_COR2 0x0400
#define ERR_COR3 0x0800
#define BUSY_RETURN 0x1000
#define NFI_Wait_Ready(timeout) while ( (*NFI_PSTA & STATUS_BUSY) && (timeout--) )
#define REPLICATION_NUMBER 512/sizeof(BOOTL_HEADER)
/*========================================================================
Type definition
=========================================================================*/
#define IO_8BITS 0x0000
#define IO_16BITS 0x0001
/*========================================================================
Prototypes
=========================================================================*/
void NFI_Init(void);
void NFI_DeInit(void);
void NFI_Config(NFI_MENU *input);
void NFIReconfigure(void);
kal_bool GoodBlockChecking(NFI_MENU *input, kal_uint32 addr1, kal_uint16 addr2);
_RET_CODE NFI_PageRead(kal_uint32 *destination, kal_uint32 *parity, kal_uint32 length, \
kal_uint16 addr_no, kal_uint32 addr1, kal_uint16 addr2, \
kal_uint16 pageSize, kal_bool ECC, kal_bool continous);
_RET_CODE NFI_ParityCheck(kal_uint32 *destination, kal_uint32 *parity, kal_uint16 addr_no, \
kal_uint32 addr1, kal_uint16 addr2, kal_uint16 pageSize, \
kal_uint16 IO, kal_uint32 blockSize);
#ifdef BIT_ERROR_TEST
void EmulateBitError(kal_uint32 *destination, kal_uint32 *parity, kal_uint16 addr_no, kal_uint32 addr1, kal_uint16 addr2, kal_uint16 pageSize);
#endif
#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -