log0recv.h

这是linux下运行的mysql软件包,可用于linux 下安装 php + mysql + apach 的网络配置

/******************************************************
Recovery

(c) 1997 Innobase Oy

Created 9/20/1997 Heikki Tuuri
*******************************************************/

#ifndef log0recv_h
#define log0recv_h

#include "univ.i"
#include "ut0byte.h"
#include "page0types.h"
#include "hash0hash.h"
#include "log0log.h"

#ifdef UNIV_HOTBACKUP
extern ibool	recv_replay_file_ops;
#endif /* UNIV_HOTBACKUP */

/***********************************************************************
Reads the checkpoint info needed in hot backup. */

ibool
recv_read_cp_info_for_backup(
/*=========================*/
			/* out: TRUE if success */
	byte*	hdr,	/* in: buffer containing the log group header */
	dulint*	lsn,	/* out: checkpoint lsn */
	ulint*	offset,	/* out: checkpoint offset in the log group */
	ulint*	fsp_limit,/* out: fsp limit of space 0, 1000000000 if the
			database is running with < version 3.23.50 of InnoDB */
	dulint*	cp_no,	/* out: checkpoint number */
	dulint*	first_header_lsn);
			/* out: lsn of of the start of the first log file */
/***********************************************************************
Scans the log segment and n_bytes_scanned is set to the length of valid
log scanned. */

void
recv_scan_log_seg_for_backup(
/*=========================*/
	byte*		buf,		/* in: buffer containing log data */
	ulint		buf_len,	/* in: data length in that buffer */
	dulint*		scanned_lsn,	/* in/out: lsn of buffer start,
					we return scanned lsn */
	ulint*		scanned_checkpoint_no,
					/* in/out: 4 lowest bytes of the
					highest scanned checkpoint number so
					far */
	ulint*		n_bytes_scanned);/* out: how much we were able to
					scan, smaller than buf_len if log
					data ended here */
/***********************************************************************
Returns TRUE if recovery is currently running. */
UNIV_INLINE
ibool
recv_recovery_is_on(void);
/*=====================*/
/***********************************************************************
Returns TRUE if recovery from backup is currently running. */
UNIV_INLINE
ibool
recv_recovery_from_backup_is_on(void);
/*=================================*/
/****************************************************************************
Applies the hashed log records to the page, if the page lsn is less than the
lsn of a log record. This can be called when a buffer page has just been
read in, or also for a page already in the buffer pool. */

void
recv_recover_page(
/*==============*/
	ibool	recover_backup,	/* in: TRUE if we are recovering a backup
				page: then we do not acquire any latches
				since the page was read in outside the
				buffer pool */
	ibool	just_read_in,	/* in: TRUE if the i/o-handler calls this for
				a freshly read page */
	page_t*	page,		/* in: buffer page */
	ulint	space,		/* in: space id */
	ulint	page_no);	/* in: page number */
/************************************************************
Recovers from a checkpoint. When this function returns, the database is able
to start processing of new user transactions, but the function
recv_recovery_from_checkpoint_finish should be called later to complete
the recovery and free the resources used in it. */

ulint
recv_recovery_from_checkpoint_start(
/*================================*/
				/* out: error code or DB_SUCCESS */
	ulint	type,		/* in: LOG_CHECKPOINT or LOG_ARCHIVE */
	dulint	limit_lsn,	/* in: recover up to this lsn if possible */
	dulint	min_flushed_lsn,/* in: min flushed lsn from data files */
	dulint	max_flushed_lsn);/* in: max flushed lsn from data files */
/************************************************************
Completes recovery from a checkpoint. */

void
recv_recovery_from_checkpoint_finish(void);
/*======================================*/
/***********************************************************
Scans log from a buffer and stores new log data to the parsing buffer. Parses
and hashes the log records if new data found. */

ibool
recv_scan_log_recs(
/*===============*/
				/* out: TRUE if limit_lsn has been reached, or
				not able to scan any more in this log group */
	ibool	apply_automatically,/* in: TRUE if we want this function to
				apply log records automatically when the
				hash table becomes full; in the hot backup tool
				the tool does the applying, not this
				function */
	ulint	available_memory,/* in: we let the hash table of recs to grow
				to this size, at the maximum */
	ibool	store_to_hash,	/* in: TRUE if the records should be stored
				to the hash table; this is set to FALSE if just
				debug checking is needed */
	byte*	buf,		/* in: buffer containing a log segment or
				garbage */
	ulint	len,		/* in: buffer length */
	dulint	start_lsn,	/* in: buffer start lsn */
	dulint*	contiguous_lsn,	/* in/out: it is known that all log groups
				contain contiguous log data up to this lsn */
	dulint*	group_scanned_lsn);/* out: scanning succeeded up to this lsn */
/**********************************************************
Resets the logs. The contents of log files will be lost! */

void
recv_reset_logs(
/*============*/
	dulint	lsn,		/* in: reset to this lsn rounded up to
				be divisible by OS_FILE_LOG_BLOCK_SIZE,
				after which we add LOG_BLOCK_HDR_SIZE */
#ifdef UNIV_LOG_ARCHIVE
	ulint	arch_log_no,	/* in: next archived log file number */
#endif /* UNIV_LOG_ARCHIVE */
	ibool	new_logs_created);/* in: TRUE if resetting logs is done
				at the log creation; FALSE if it is done
				after archive recovery */
#ifdef UNIV_HOTBACKUP
/**********************************************************
Creates new log files after a backup has been restored. */

void
recv_reset_log_files_for_backup(
/*============================*/
	const char*	log_dir,	/* in: log file directory path */
	ulint		n_log_files,	/* in: number of log files */
	ulint		log_file_size,	/* in: log file size */
	dulint		lsn);		/* in: new start lsn, must be
					divisible by OS_FILE_LOG_BLOCK_SIZE */
#endif /* UNIV_HOTBACKUP */
/************************************************************
Creates the recovery system. */

void
recv_sys_create(void);
/*=================*/
/************************************************************
Inits the recovery system for a recovery operation. */

void
recv_sys_init(
/*==========*/
	ibool	recover_from_backup,	/* in: TRUE if this is called
					to recover from a hot backup */
	ulint	available_memory);	/* in: available memory in bytes */
/***********************************************************************
Empties the hash table of stored log records, applying them to appropriate
pages. */

void
recv_apply_hashed_log_recs(
/*=======================*/
	ibool	allow_ibuf);	/* in: if TRUE, also ibuf operations are
				allowed during the application; if FALSE,
				no ibuf operations are allowed, and after
				the application all file pages are flushed to
				disk and invalidated in buffer pool: this
				alternative means that no new log records
				can be generated during the application */
#ifdef UNIV_HOTBACKUP
/***********************************************************************
Applies log records in the hash table to a backup. */

void
recv_apply_log_recs_for_backup(void);
/*================================*/
#endif
#ifdef UNIV_LOG_ARCHIVE
/************************************************************
Recovers from archived log files, and also from log files, if they exist. */

ulint
recv_recovery_from_archive_start(
/*=============================*/
				/* out: error code or DB_SUCCESS */
	dulint	min_flushed_lsn,/* in: min flushed lsn field from the
				data files */
	dulint	limit_lsn,	/* in: recover up to this lsn if possible */
	ulint	first_log_no);	/* in: number of the first archived log file
				to use in the recovery; the file will be
				searched from INNOBASE_LOG_ARCH_DIR specified
				in server config file */
/************************************************************
Completes recovery from archive. */

void
recv_recovery_from_archive_finish(void);
/*===================================*/
#endif /* UNIV_LOG_ARCHIVE */
/***********************************************************************
Checks that a replica of a space is identical to the original space. */

void
recv_compare_spaces(
/*================*/
	ulint	space1,	/* in: space id */
	ulint	space2,	/* in: space id */
	ulint	n_pages);/* in: number of pages */
/***********************************************************************
Checks that a replica of a space is identical to the original space. Disables
ibuf operations and flushes and invalidates the buffer pool pages after the
test. This function can be used to check the recovery before dict or trx
systems are initialized. */

void
recv_compare_spaces_low(
/*====================*/
	ulint	space1,	/* in: space id */
	ulint	space2,	/* in: space id */
	ulint	n_pages);/* in: number of pages */

/* Block of log record data */
typedef struct recv_data_struct	recv_data_t;
struct recv_data_struct{
	recv_data_t*	next;	/* pointer to the next block or NULL */
				/* the log record data is stored physically
				immediately after this struct, max amount
				RECV_DATA_BLOCK_SIZE bytes of it */
};

/* Stored log record struct */
typedef struct recv_struct	recv_t;
struct recv_struct{
	byte		type;	/* log record type */
	ulint		len;	/* log record body length in bytes */
	recv_data_t*	data;	/* chain of blocks containing the log record
				body */
	dulint		start_lsn;/* start lsn of the log segment written by
				the mtr which generated this log record: NOTE
				that this is not necessarily the start lsn of
				this log record */
	dulint		end_lsn;/* end lsn of the log segment written by
				the mtr which generated this log record: NOTE
				that this is not necessarily the end lsn of
				this log record */
	UT_LIST_NODE_T(recv_t)
			rec_list;/* list of log records for this page */
};

/* Hashed page file address struct */
typedef struct recv_addr_struct	recv_addr_t;
struct recv_addr_struct{
	ulint		state;	/* RECV_NOT_PROCESSED, RECV_BEING_PROCESSED,
				or RECV_PROCESSED */
	ulint		space;	/* space id */
	ulint		page_no;/* page number */
	UT_LIST_BASE_NODE_T(recv_t)
			rec_list;/* list of log records for this page */
	hash_node_t	addr_hash;
};

/* Recovery system data structure */
typedef struct recv_sys_struct	recv_sys_t;
struct recv_sys_struct{
	mutex_t		mutex;	/* mutex protecting the fields apply_log_recs,
				n_addrs, and the state field in each recv_addr
				struct */
	ibool		apply_log_recs;
				/* this is TRUE when log rec application to
				pages is allowed; this flag tells the
				i/o-handler if it should do log record
				application */
	ibool		apply_batch_on;
				/* this is TRUE when a log rec application
				batch is running */
	dulint		lsn;	/* log sequence number */
	ulint		last_log_buf_size;
				/* size of the log buffer when the database
				last time wrote to the log */
	byte*		last_block;
				/* possible incomplete last recovered log
				block */
	byte*		last_block_buf_start;
				/* the nonaligned start address of the
				preceding buffer */
	byte*		buf;	/* buffer for parsing log records */
	ulint		len;	/* amount of data in buf */
	dulint		parse_start_lsn;
				/* this is the lsn from which we were able to
				start parsing log records and adding them to
				the hash table; ut_dulint_zero if a suitable
				start point not found yet */
	dulint		scanned_lsn;
				/* the log data has been scanned up to this
				lsn */
	ulint		scanned_checkpoint_no;
				/* the log data has been scanned up to this
				checkpoint number (lowest 4 bytes) */
	ulint		recovered_offset;
				/* start offset of non-parsed log records in
				buf */
	dulint		recovered_lsn;
				/* the log records have been parsed up to
				this lsn */
	dulint		limit_lsn;/* recovery should be made at most up to this
				lsn */
	ibool		found_corrupt_log;
				/* this is set to TRUE if we during log
				scan find a corrupt log block, or a corrupt
				log record, or there is a log parsing
				buffer overflow */
	log_group_t*	archive_group;
				/* in archive recovery: the log group whose
				archive is read */
	mem_heap_t*	heap;	/* memory heap of log records and file
				addresses*/
	hash_table_t*	addr_hash;/* hash table of file addresses of pages */
	ulint		n_addrs;/* number of not processed hashed file
				addresses in the hash table */
};

extern recv_sys_t*	recv_sys;
extern ibool		recv_recovery_on;
extern ibool		recv_no_ibuf_operations;
extern ibool		recv_needed_recovery;

extern ibool            recv_lsn_checks_on;
#ifdef UNIV_HOTBACKUP
extern ibool		recv_is_making_a_backup;
#endif /* UNIV_HOTBACKUP */
extern ulint		recv_max_parsed_page_no;

/* Size of the parsing buffer; it must accommodate RECV_SCAN_SIZE many
times! */ 
#define RECV_PARSING_BUF_SIZE	(2 * 1024 * 1024)

/* Size of block reads when the log groups are scanned forward to do a
roll-forward */
#define RECV_SCAN_SIZE		(4 * UNIV_PAGE_SIZE)

/* States of recv_addr_struct */
#define RECV_NOT_PROCESSED	71
#define RECV_BEING_READ		72
#define RECV_BEING_PROCESSED	73
#define RECV_PROCESSED		74

/* The number which is added to a space id to obtain the replicate space
in the debug version: spaces with an odd number as the id are replicate
spaces */
#define RECV_REPLICA_SPACE_ADD	1

extern ulint	recv_n_pool_free_frames;

#ifndef UNIV_NONINL
#include "log0recv.ic"
#endif

#endif