changelog

来自「eCos操作系统源码」· 代码 · 共 345 行

2003-12-05  Andrew Lunn  <[e-mail]>

	* include/hal_diag.h: hal_delay_us() is a C function.

2003-07-18  Nick Garnett  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl:
        Changed values for CYGNUM_HAL_RTC_NUMERATOR,
        CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
        "default_value" from "calculated". This makes it easier
        to change these values globally.
        
2003-02-13  Patrick Doyle  <[e-mail]>
	* src/excalibur_misc.c: Replaced explicit prototype of memset with
	#include <string.h>.

2002-08-12  Mark Salter  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl: Remove CYGSEM_REDBOOT_ARM_LINUX_BOOT
	requirement.

2002-05-14  Jesper Skov  <[e-mail]>

	* src/excalibur_misc.c: Fixed warning.

2002-05-07  Gary Thomas  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl: 
	Standardize CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT usage.

2002-04-18  Jonathan Larmour  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl: Use --no-target-default-spec to
	avoid problems with newer tools.

2002-04-02  Jesper Skov  <[e-mail]>

	* include/pkgconf/mlt_arm_arm9_excalibur_redboot.h: Added new
	REDBOOT startup mode that is similar in function to the ROMRAM
	starup mode, with the exception that (RedBoot) application memory
	is linked at 0x07f80000 instead of 0x00008000, thus freeing up
	memory at 0x8000 to applications linked without the correct linker
	map.
	* include/pkgconf/mlt_arm_arm9_excalibur_redboot.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_redboot.ldi: Same.

	* cdl/hal_arm_arm9_excalibur.cdl: Added REDBOOT startup mode
	handling.

	* include/hal_platform_setup.h: Handle REDBOOT startup mode like
	ROMRAM mode.

	* misc/redboot_REDBOOT.ecm: Configuration for use of the REDBOOT
	startup mode.

2002-01-29  Jesper Skov  <[e-mail]>

	* include/plf_io.h (CYGARC_PHYSICAL_ADDRESS): Added.

	* cdl/hal_arm_arm9_excalibur.cdl: Use generic linux exec command.
	* src/redboot_linux_exec.c: Removed.

2002-01-28  Jesper Skov  <[e-mail]>

	* include/plf_io.h: Added.

2001-12-21  Jesper Skov  <[e-mail]>

	* include/pkgconf/mlt_arm_arm9_excalibur_romram.ldi: Increase RAM
	size to 128MB.
	* include/pkgconf/mlt_arm_arm9_excalibur_romram.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_romram.h: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.ldi: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.h: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_ram.ldi: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_ram.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_ram.h: Same.

	* include/hal_platform_setup.h: Make Altera's init code the
	default after finding the buglet that made it fail.

	* include/excalibur.h: Added some registers, cut out some unused
	definitions.
	* cdl/hal_arm_arm9_excalibur.cdl: Increased clocks to 150/75MHz.

2001-12-20  Jesper Skov  <[e-mail]>

	* include/hal_platform_setup.h: Added SDRAM configuration code
	from Altera. Clean up code. Added printhex8 function.

2001-12-18  Jesper Skov  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl: Added some clock comments. 
	* include/excalibur.h: Added CLK definitions.
	* include/hal_platform_setup.h: Added code (from Altera) to change
	clocking to 150/75/75MHz. They don't work though.
	Oops, get the math right.
	
2001-12-17  Jesper Skov  <[e-mail]>

	* include/excalibur.h (_MMAP_PLD1_INIT): Changed to 0x0f000000.
	* src/excalibur_misc.c (hal_mmu_init): Added mapping for
	PLD1. Still causes access error though...

2001-12-14  Jesper Skov  <[e-mail]>

	* include/pkgconf/mlt_arm_arm9_excalibur_romram.h: Changed ROM
	location.
	* include/pkgconf/mlt_arm_arm9_excalibur_romram.ldi: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_romram.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.h: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.ldi: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.mlt: Same.

	* include/excalibur.h: Change memory mapping to match that
	expected by Linux.
	* cdl/hal_arm_arm9_excalibur.cdl: Relocate .hex file accordingly.
	Also suppress reservation of space for RedBoot[backup] image.
	Finally, increase default baud rate to 57600.
	* src/excalibur_misc.c (hal_mmu_init): Change memory mapping.

2001-12-06  Jesper Skov  <[e-mail]>

	* src/redboot_linux_exec.c: Added.

	* misc/redboot_ROMRAM.ecm: Don't disable dcache.
	* misc/redboot_RAM.ecm: Same.

	* cdl/hal_arm_arm9_excalibur.cdl: Added Linux platform
	identifier [for Camelot platform - may have to change]. Build file
	with exec command.

2001-12-03  Jesper Skov  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl: Cache should be safe to use
	now. Bug in variant HAL macro.

2001-08-17  Jesper Skov  <[e-mail]>

	* cdl/hal_arm_arm9_excalibur.cdl: Point to
	excalibur_program_new_stack.
	* src/excalibur_misc.c (excalibur_program_new_stack): Added.

	* misc/redboot_ROMRAM.ecm: Clean up inferred/user_values.

2001-08-16  Jesper Skov  <[e-mail]>

	* misc/redboot_ROMRAM.ecm: Added threads. [made it inferred]
	Enable syscall support.

	* include/hal_platform_setup.h: Enable flash parts 1-3 on
	expansion bus.

	* include/excalibur.h: Added expansion bus config defs.

2001-08-15  Jesper Skov  <[e-mail]>

	* src/excalibur_misc.c (hal_clock_initialize): Be a little more
	careful initializing the timer.

	* cdl/hal_arm_arm9_excalibur.cdl: Fix RTC period calculation.

	* misc/redboot_ROMRAM.ecm: Added flash and compression.
	* misc/redboot_RAM.ecm: Added.

	* include/pkgconf/mlt_arm_arm9_excalibur_ram.mlt: More space to
	RedBoot.
	* include/pkgconf/mlt_arm_arm9_excalibur_ram.ldi: Same.

	* src/hal_diag.c (cyg_hal_plf_serial_isr): Also use RX int
	workaround here.

	* src/excalibur_misc.c (hal_IRQ_handler): INT_ID doesn't do the
	helpful thing, so decode by steam.

	* cdl/hal_arm_arm9_excalibur.cdl: Disable D-cache again.

2001-08-14  Jesper Skov  <[e-mail]>

	* src/excalibur_misc.c (hal_mmu_init): Don't let flash be cached:
	appears to cause a bus lock when accessed from RAM.

	* include/hal_platform_setup.h: Only copy code when in ROMRAM
	startup configuration.

	* src/excalibur_misc.c (hal_delay_us): Use timer.

	* include/hal_platform_setup.h: Better ROMRAM startup.

	* cdl/hal_arm_arm9_excalibur.cdl: Allow caches again. Up baud rate.

	* src/hal_diag.c (cyg_hal_plf_serial_putc): Work around HW bug in
	transmitter.

	* cdl/hal_arm_arm9_excalibur.cdl: Added ROMRAM startup mode.

	* include/pkgconf/mlt_arm_arm9_excalibur_romram.ldi: Added.
	* include/pkgconf/mlt_arm_arm9_excalibur_romram.mlt: Added.
	* include/pkgconf/mlt_arm_arm9_excalibur_romram.h: Added.

	* src/hal_diag.c: Use RI flag in ISR instead of polling the FIFO
	count register. Appears that FIFO jams on overruns somehow, and
	messes up the ISR state in the process. Try to work around that by
	checking both FIFO count and ISR RI flag. It works. Sort of.

	* src/excalibur_misc.c (hal_delay_us): Do nothing for now. Real
	code changed a bit too. 

	* include/excalibur.h: Fixed typo in FIFO register defs.

	* cdl/hal_arm_arm9_excalibur.cdl: Changed baud rate to 9600 until
	cache issue is resolved. 

2001-08-13  Jesper Skov  <[e-mail]>

	* src/excalibur_misc.c (hal_mmu_init): Fix comment error.

	* include/hal_platform_setup.h: Clear instruction cache on startup.

	* include/excalibur.h: Minor reorg, comment question resolved.

	* cdl/hal_arm_arm9_excalibur.cdl: Require ARM922T support.

	* include/hal_platform_setup.h: Write buffer cannot be disabled.

2001-08-10  Jesper Skov  <[e-mail]>

	* src/excalibur_misc.c (hal_delay_us): Don't use prescaling.

	* include/hal_platform_setup.h: Set up EBI1-3 (flash parts 1-3) -
	doesn't work though.

	* include/hal_platform_ints.h: Added reset code.

	* include/excalibur.h: Added watchdog defs. Updated EBI regions.

2001-08-09  Jesper Skov  <[e-mail]>

	* include/hal_platform_setup.h: Remove SRAM hack.
	* include/excalibur.h: Same.

	* include/hal_platform_setup.h: Cleanup.
	Missing LED cleanup. Move PLD init.

	* cdl/hal_arm_arm9_excalibur.cdl: Disable caches for now.

	* src/excalibur_misc.c: Added debug code, disable PLD interrupts.

	* include/hal_platform_setup.h: Added some (overkill) delays,
	moved PLD mmap init, do SDRAM init, don't touch unused mmap
	entries. Do DPSRAM init (not that it should make a difference).

	* include/excalibur.h: Fixed mmap sizes. Fixed SDRAM map
	size. Added some debug code. Added DPSRAM defs.

2001-08-08  Jesper Skov  <[e-mail]>

	* include/hal_platform_setup.h: Jump to ROM, disable ROM
	mapping. Wait after SDRAM refresh operations.
	Output debug via LED macro.

	* include/excalibur.h: Altera SDRAM settings.

	* include/hal_platform_setup.h: Adding more initialization and
	(temporary) UART debug code. Fixing instruction addressing modes.

	* include/excalibur.h: Adding more definitions.

	* cdl/hal_arm_arm9_excalibur.cdl: Added ihex build rule for
	RedBoot.

2001-08-07  Jesper Skov  <[e-mail]>

	* include/excalibur.h: Added SDRAM controller details.

	* cdl/hal_arm_arm9_excalibur.cdl: Added SDRAM clock.

	* include/hal_platform_setup.h: Added hardwired SDRAM init.

	* src/hal_diag.c: Use peripheral clock. Fix compiler error.

	* src/excalibur_misc.c: Updated memory mapping. Fix compiler
	errors and warnings.

	* include/pkgconf/mlt_arm_arm9_excalibur_ram.ldi: Updated.
	* include/pkgconf/mlt_arm_arm9_excalibur_ram.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_ram.h: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.ldi: Updated.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.mlt: Same.
	* include/pkgconf/mlt_arm_arm9_excalibur_rom.h: Same.

	* include/hal_platform_setup.h: Set up memory map.

	* include/excalibur.h: Added memory mapping registers and memory
	map layout.

	* cdl/hal_arm_arm9_excalibur.cdl: Package display changed to match
	top-level. Added clock definitions (must add configury eventually).

2001-08-06  Jesper Skov  <[e-mail]>

	* src/excalibur_misc.c: Clock, irq and MMU code.

	* include/excalibur.h: Register definitions.

	* src/hal_diag.c: Serial driver added.

	* Created HAL for Altera Excalibur.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================