hal_platform_setup.h

来自「eCos操作系统源码」· C头文件 代码 · 共 275 行

#ifndef CYGONCE_HAL_PLATFORM_SETUP_H
#define CYGONCE_HAL_PLATFORM_SETUP_H
//=============================================================================
//
//      hal_platform_setup.h
//
//      Platform specific support for HAL (assembly code)
//
//=============================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    michael anburaj <[e-mail]>
// Contributors: michael anburaj <[e-mail]>
// Date:         2003-08-01
// Purpose:      ARM9/SMDK2410 platform specific support routines
// Description: 
// Usage:        #include <cyg/hal/hal_platform_setup.h>
//     Only used by "vectors.S"         
//
//####DESCRIPTIONEND####
//
//=============================================================================

#include <pkgconf/system.h>           // System-wide configuration info
#include CYGBLD_HAL_VARIANT_H         // Variant specific configuration
#include CYGBLD_HAL_PLATFORM_H        // Platform specific configuration
#include CYGHWR_MEMORY_LAYOUT_H
#include <cyg/hal/hal_mmu.h>          // MMU definitions
#include <cyg/hal/s3c2410x.h>         // Platform specific hardware definitions
#include <cyg/hal/memcfg.h>           // Platform specific memory configuration


#if (CYGNUM_HAL_ARM_SMDK2410_CPU_CLOCK == 176000000)
#define M_MDIV      80                  // Fin=12.0MHz Fout=176.0MHz
#define M_PDIV      1
#define M_SDIV      1
#elif (CYGNUM_HAL_ARM_SMDK2410_CPU_CLOCK == 180000000)
#define M_MDIV      82                  // Fin=12.0MHz Fout=180.0MHz
#define M_PDIV      1
#define M_SDIV      1
#elif (CYGNUM_HAL_ARM_SMDK2410_CPU_CLOCK == 184000000)
#define M_MDIV      84                  // Fin=12.0MHz Fout=184.0MHz
#define M_PDIV      1
#define M_SDIV      1
#elif (CYGNUM_HAL_ARM_SMDK2410_CPU_CLOCK == 192000000)
#define M_MDIV      88                  // Fin=12.0MHz Fout=192.0MHz
#define M_PDIV      1
#define M_SDIV      1
#elif (CYGNUM_HAL_ARM_SMDK2410_CPU_CLOCK == 200000000)
#define M_MDIV      92                  // Fin=12.0MHz Fout=200.0MHz
#define M_PDIV      1
#define M_SDIV      1
#else
#error CYGNUM_HAL_ARM_SMDK2410_CPU_CLOCK not set to the right value
#endif


#if defined(CYG_HAL_STARTUP_ROM) || defined(CYG_HAL_STARTUP_ROMRAM)
#define PLATFORM_SETUP1 _platform_setup1
#define CYGHWR_HAL_ARM_HAS_MMU
#define CYGSEM_HAL_ROM_RESET_USES_JUMP

// We need this here - can't rely on a translation table until MMU has
// been initialized
        .macro RAW_LED_MACRO x
        ldr     r0,=GPFDAT
        ldr     r1,[r0]
        bic     r1,r1,#(0xf<<4)
        orr     r1,r1,#((0xf & ~(\x))<<4)
        str     r1, [r0]
        .endm


        // Configure GPF[4:7] as Output & pull-up turned off
        .macro RAW_LED_PORT_INIT_MACRO
        ldr     r0,=GPFUP
        ldr     r1,[r0]
        orr     r1,r1,#((1<<7)|(1<<6)|(1<<5)|(1<<4))
        str     r1,[r0]

        RAW_LED_MACRO 0

        ldr     r0,=GPFCON
        ldr     r1,[r0]
        orr     r1,r1,#((1<<14)|(1<<12)|(1<<10)|(1<<8))
        str     r1,[r0]
        .endm

// This macro represents the initial startup code for the platform        
        .macro  _platform_setup1
#ifndef CYG_HAL_STARTUP_RAM
        ldr    r0,=WTCON            // watch dog disable 
        ldr    r1,=0x0         
        str    r1,[r0]
#endif
        RAW_LED_PORT_INIT_MACRO

#ifndef CYG_HAL_STARTUP_RAM
        ldr    r0,=INTMSK
        ldr    r1,=0xffffffff       // all interrupt disable
        str    r1,[r0]

        ldr    r0,=INTSUBMSK
        ldr    r1,=0x7ff            // all sub interrupt disable
        str    r1,[r0]

        RAW_LED_MACRO 1

        // Disable and clear caches
        mrc  p15,0,r0,c1,c0,0
        bic  r0,r0,#0x1000              // disable ICache
        bic  r0,r0,#0x000f              // disable DCache, write buffer,
                                        // MMU and alignment faults
        mcr  p15,0,r0,c1,c0,0
        nop
        nop
        mov  r0,#0
        mcr  p15,0,r0,c7,c6,0           // clear data cache
#if 0
        mrc  p15,0,r0,c15,c1,0          // disable streaming
        orr  r0,r0,#0x80
        mcr  p15,0,r0,c15,c1,0
#endif

        // To reduce PLL lock time, adjust the LOCKTIME register. 
        ldr    r0,=LOCKTIME
        ldr    r1,=0xffffff
        str    r1,[r0]

        // We must set ratios, set memctl, then change FCLK.
        ldr     r0,=CLKDIVN     // Set ratios 1:2:4 for FCLK:HCLK:PCLK
        ldr     r1,=(3)
        str     r1,[r0]

        // MMU_SetAsyncBusMode  //Must select, since we're setting HDIVN=1
#define R1_iA   (1<<31)
#define R1_nF   (1<<30)
        mrc     p15,0,r0,c1,c0,0
        orr     r0,r0,#(R1_nF|R1_iA)
        mcr     p15,0,r0,c1,c0,0


        // Set memory control registers
        adr    r0,1f
        ldr    r1,=BWSCON           // BWSCON Address
        add    r2, r0, #52          // End address of SMRDATA
0:
        ldr    r3, [r0], #4    
        str    r3, [r1], #4    
        cmp    r2, r0        
        bne    0b
        b      2f

1:
// Memory configuration should be optimized for best performance 
// The following parameter is not optimized.                     
// Memory access cycle parameter strategy
// 1) The memory settings is  safe parameters even at HCLK=75Mhz.
// 2) SDRAM refresh period is for HCLK=75Mhz. 

        .long (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
        .long ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))   //GCS0
        .long ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))   //GCS1 
        .long ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))   //GCS2
        .long ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))   //GCS3
        .long ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))   //GCS4
        .long ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))   //GCS5
        .long ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))    //GCS6
        .long ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))    //GCS7
        .long ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)    

        .long 0x32                    // SCLK power saving mode, BANKSIZE 128M/128M

        .long 0x30                    // MRSR6 CL=3clk
        .long 0x30                    // MRSR7
//        .long 0x20                    // MRSR6 CL=2clk
//        .long 0x20                    // MRSR7

2:
        RAW_LED_MACRO 2

        // Configure MPLL
        ldr    r0,=MPLLCON          
        ldr    r1,=((M_MDIV<<12)+(M_PDIV<<4)+M_SDIV)  // Fin=12MHz,Fout=50MHz
        str    r1,[r0]

#endif /* !CYG_HAL_STARTUP_RAM */

        // Set up a stack [for calling C code]
        ldr     r1,=__startup_stack
        ldr     r2,=SMDK2410_SDRAM_PHYS_BASE
        orr     sp,r1,r2

        // Create MMU tables
        RAW_LED_MACRO 3
        bl      hal_mmu_init
        RAW_LED_MACRO 4

        // Enable MMU
        ldr     r2,=10f
#ifdef CYG_HAL_STARTUP_ROMRAM
        ldr     r1,=__exception_handlers
        ldr r9,=0x80000000
        sub     r1,r2,r1
        add     r2,r9,r1        // r9 has ROM offset
#endif        
        ldr        r1,=MMU_Control_Init|MMU_Control_M
        mcr        MMU_CP,0,r1,MMU_Control,c0
        mov        pc,r2    /* Change address spaces */
        nop
        nop
        nop
10:
        RAW_LED_MACRO 5
        
#ifdef CYG_HAL_STARTUP_ROMRAM
        mov     r0,r9                     // Relocate FLASH/ROM to RAM
        ldr     r1,=__exception_handlers  // ram base & length
        ldr     r2,=__rom_data_end
20:     ldr     r3,[r0],#4
        str     r3,[r1],#4
        cmp     r1,r2
        bne     20b
        ldr     r0,=30f
        mov     pc,r0
        nop
        nop
        nop
        nop
30:             
#endif
        RAW_LED_MACRO 6
        .endm
        
#else // defined(CYG_HAL_STARTUP_ROM) || defined(CYG_HAL_STARTUP_ROMRAM)
#define PLATFORM_SETUP1
#endif

//-----------------------------------------------------------------------------
// end of hal_platform_setup.h
#endif // CYGONCE_HAL_PLATFORM_SETUP_H