ipaq_misc.c

来自「eCos操作系统源码」· C语言 代码 · 共 176 行

//==========================================================================
//
//      ipaq_misc.c
//
//      HAL misc board support code for StrongARM SA1110/iPAQ
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    gthomas
// Contributors: hmt
//               Travis C. Furrer <[e-mail]>
//               Richard Panton <[e-mail]>
// Date:         2001-02-24
// Purpose:      HAL board support
// Description:  Implementations of HAL board interfaces
//
//####DESCRIPTIONEND####
//
//========================================================================*/

#include <pkgconf/hal.h>

#include <cyg/infra/cyg_type.h>         // base types
#include <cyg/infra/cyg_trac.h>         // tracing macros
#include <cyg/infra/cyg_ass.h>          // assertion macros

#include <cyg/hal/hal_io.h>             // IO macros
#include <cyg/hal/hal_if.h>             // Virtual vector interfaces
#include <cyg/hal/hal_arch.h>           // Register state info
#include <cyg/hal/hal_diag.h>
#include <cyg/hal/hal_intr.h>           // Interrupt names
#include <cyg/hal/hal_cache.h>
#include <cyg/hal/hal_sa11x0.h>         // Hardware definitions
#include <cyg/hal/ipaq.h>               // Platform specifics

#include <cyg/infra/diag.h>             // diag_printf

#include <cyg/hal/lcd_support.h>
#include <cyg/hal/atmel_support.h>

// All the MM table layout is here:
#include <cyg/hal/hal_mm.h>

#include <string.h>                     // memset()

void
hal_mmu_init(void)
{
    unsigned long ttb_base = SA11X0_RAM_BANK0_BASE + 0x4000;
    unsigned long i;

    /*
     * Set the TTB register
     */
    asm volatile ("mcr  p15,0,%0,c2,c0,0" : : "r"(ttb_base) /*:*/);

    /*
     * Set the Domain Access Control Register
     */
    i = ARM_ACCESS_DACR_DEFAULT;
    asm volatile ("mcr  p15,0,%0,c3,c0,0" : : "r"(i) /*:*/);

    /*
     * First clear all TT entries - ie Set them to Faulting
     */
    memset((void *)ttb_base, 0, ARM_FIRST_LEVEL_PAGE_TABLE_SIZE);

    /*               Actual  Virtual  Size   Attributes                                                    Function  */
    /*		     Base     Base     MB      cached?           buffered?        access permissions                 */
    /*             xxx00000  xxx00000                                                                                */
    X_ARM_MMU_SECTION(0x000,  0x500,    32,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Boot flash ROMspace */
    X_ARM_MMU_SECTION(0x080,  0x080,     4,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Application flash ROM */
    X_ARM_MMU_SECTION(0x100,  0x100,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SA-1101 Development Board Registers */
    X_ARM_MMU_SECTION(0x180,  0x180,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* Ethernet Adaptor */
    X_ARM_MMU_SECTION(0x184,  0x184,     1,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* XBusReg    */
    X_ARM_MMU_SECTION(0x188,  0x188,     1,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SysRegA    */
    X_ARM_MMU_SECTION(0x18C,  0x18C,     1,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SysRegB    */
    X_ARM_MMU_SECTION(0x190,  0x190,     4,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* CPLD A     */
    X_ARM_MMU_SECTION(0x194,  0x194,     4,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* CPLD B     */
    X_ARM_MMU_SECTION(0x200,  0x200,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* PCMCIA Socket A */
    X_ARM_MMU_SECTION(0x300,  0x300,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* PCMCIA Sockets B */
    X_ARM_MMU_SECTION(0x400,  0x400,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SA1111 Daughter card */
    X_ARM_MMU_SECTION(0x480,  0x480,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* Video Controller Daughter card */
    X_ARM_MMU_SECTION(0x800,  0x800, 0x400,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* StrongARM(R) Registers */
    X_ARM_MMU_SECTION(0xC00,  0x000,    32,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* DRAM Bank 0 */
    X_ARM_MMU_SECTION(0xC00,  0xC00,    32,  ARM_UNCACHEABLE, ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* DRAM Bank 0 */
    X_ARM_MMU_SECTION(0xE00,  0xE00,   128,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Zeros (Cache Clean) Bank */

}

//
// Board control register support
//   Update the board control register (write only).  Only the bits
// specified by 'mask' are changed to 'value'.
//

void
ipaq_EGPIO(unsigned long mask, unsigned long value)
{
    _ipaq_EGPIO = (_ipaq_EGPIO & ~mask) | (mask & value);
    *SA1110_EGPIO = _ipaq_EGPIO;
}

//
// Platform specific initialization
//

void
plf_hardware_init(void)
{
    // Force "alternate" use of GPIO pins used for LCD screen
    *SA11X0_GPIO_ALTERNATE_FUNCTION |= 0x000003FC;      // Bits 2..9
    *SA11X0_GPIO_PIN_DIRECTION |= 0x000003FC;           // Bits 2..9
    *SA11X0_GPIO_PIN_OUTPUT_CLEAR = 0x000003FC;         // Bits 2..9

    // Pins used for buttons, communications with Atmel
    //*SA11X0_GPIO_PIN_DIRECTION &= 0x03FE0C003;
    *SA11X0_GPIO_RISING_EDGE_DETECT |= 0x00000002;
    *SA11X0_GPIO_FALLING_EDGE_DETECT |= 0x00000002;

    // Setup communication with Atmel micro-controller
    *SA1110_GPCLK_CONTROL_0 = SA1110_GPCLK_SUS_UART;
    *SA11X0_PPC_PIN_ASSIGNMENT &= ~SA11X0_PPC_UART_PIN_REASSIGNED;
    atmel_init();
}

//
// Support for platform specific I/O channels
//

void
plf_if_init(void) 
{
    // Initialize screen
    lcd_init(16);
#ifdef CYGSEM_IPAQ_LCD_COMM
    // Initialize I/O channel
    lcd_comm_init();
#endif
}