grg.h
来自「eCos操作系统源码」· C头文件 代码 · 共 114 行
H
114 行
#ifndef CYGONCE_HAL_ARM_XSCALE_GRG_GRG_H#define CYGONCE_HAL_ARM_XSCALE_GRG_GRG_H/*=============================================================================//// grg.h//// Platform specific support (register layout, etc)////=============================================================================//####ECOSGPLCOPYRIGHTBEGIN####// -------------------------------------------// This file is part of eCos, the Embedded Configurable Operating System.// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Red Hat, Inc.//// eCos is free software; you can redistribute it and/or modify it under// the terms of the GNU General Public License as published by the Free// Software Foundation; either version 2 or (at your option) any later version.//// eCos is distributed in the hope that it will be useful, but WITHOUT ANY// WARRANTY; without even the implied warranty of MERCHANTABILITY or// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License// for more details.//// You should have received a copy of the GNU General Public License along// with eCos; if not, write to the Free Software Foundation, Inc.,// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.//// As a special exception, if other files instantiate templates or use macros// or inline functions from this file, or you compile this file and link it// with other works to produce a work based on this file, this file does not// by itself cause the resulting work to be covered by the GNU General Public// License. However the source code for this file must still be made available// in accordance with section (3) of the GNU General Public License.//// This exception does not invalidate any other reasons why a work based on// this file might be covered by the GNU General Public License.//// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.// at http://sources.redhat.com/ecos/ecos-license/// -------------------------------------------//####ECOSGPLCOPYRIGHTEND####//=============================================================================//#####DESCRIPTIONBEGIN####//// Author(s): msalter// Contributors: msalter// Date: 2003-02-05// Purpose: Intel GRG specific support routines// Description: // Usage: #include <cyg/hal/grg.h>////####DESCRIPTIONEND####////===========================================================================*/#include <pkgconf/system.h>#include CYGHWR_MEMORY_LAYOUT_H#include <pkgconf/hal_arm_xscale_grg.h>#include <cyg/hal/hal_ixp425.h>// These must match setup in the page table in hal_platform_extras.h#define SDRAM_PHYS_BASE 0x00000000#define SDRAM_BASE 0x00000000#define SDRAM_UNCACHED_BASE 0x10000000#define SDRAM_SIZE 0x02000000 // 32MB// CS0 (flash optimum timing)#define IXP425_EXP_CS0_INIT \ (EXP_ADDR_T(3) | EXP_SETUP_T(3) | EXP_STROBE_T(15) | EXP_HOLD_T(3) | \ EXP_RECOVERY_T(15) | EXP_SZ_16M | EXP_WR_EN | EXP_BYTE_RD16 | EXP_CS_EN)#define IXP425_SDRAM_CONFIG_INIT (SDRAM_CONFIG_CAS_3 | SDRAM_CONFIG_2x8Mx16)#define IXP425_SDRAM_REFRESH_CNT 0x81A#define IXP425_SDRAM_SET_MODE_CMD SDRAM_IR_MODE_SET_CAS3// ------------------------------------------------------------------------// GPIO lines//#define GPIO_PWR_FAIL_IRQ_N 0#define GPIO_DSL_IRQ_N 1#define GPIO_SLIC_A_IRQ_N 2#define GPIO_SLIC_B_IRQ_N 3#define GPIO_DSP_IRQ_N 4#define GPIO_IDE_IRQ_N 5// GPIO lines used for SPI bus#define GPIO_SPI_CS1_N 7#define GPIO_SPI_CS0_N 8#define GPIO_SPI_SCK 9#define GPIO_SPI_SDI 10#define GPIO_SPI_SDO 13#define GPIO_IO_RESET_N 12// ------------------------------------------------------------------------// No Hex Display//#ifdef __ASSEMBLER__ // Display hex digits in 'value' not masked by 'mask'. .macro DISPLAY value, reg0, reg1 .endm#elsestatic inline void HEX_DISPLAY(int value){}#endif // __ASSEMBLER__// ------------------------------------------------------------------------#endif // CYGONCE_HAL_ARM_XSCALE_GRG_GRG_H// EOF grg.h
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?