changelog

来自「eCos操作系统源码」· 代码 · 共 860 行 · 第 1/2 页

       * cdl/hal_arm_ebsa285.cdl: Added cygmon console device
       config. Added make rule for binary conversion of cygmon image.

2000-01-24  Jesper Skov  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl: Add stubs build rule.

2000-01-24  John Dallaway  <[e-mail]>

	* cdl/*.cdl:

	Remove obsolete option CYGTST_TESTING_IDENTIFIER.

2000-01-19  Hugo Tyson  <[e-mail]>

	* cdl/*.cdl: Add descriptions to a number of options &c which were
	lacking same, also tidied up other typos as noticed en passant.

2000-01-10  Hugo Tyson  <[e-mail]>

	* src/ebsa285_misc.c (hal_IRQ_handler): Conditionally remove
	debugging check for FIQ sources being active at customer's
	request; they are now using FIQ via VSR so the warning message is
	unwanted.

1999-11-25  Jonathan Larmour  <[e-mail]>

	* src/hal_diag.c: Conditionalize def of diag_buffer for only when it's
	explicitly wanted and someone hacks the code
	(hal_diag_write_char): Likewise

1999-11-25  Gary Thomas  <[e-mail]>

	* include/pkgconf/mlt_arm_ebsa285_rom.h: 
	* include/pkgconf/mlt_arm_ebsa285_ram.h: Update 'do not edit' strings.

1999-11-16  Hugo Tyson  <[e-mail]>

	* tests/sdram0.cxx: New file to test SDRAM initialization.  It is
	somewhat EBSA specific in that it sanity checks the control reg
	setup as well as testing memory per se.

	* cdl/hal_arm_ebsa285.cdl: build the new test.

	* tests/PKGconf.mak: New file: build the new test.

1999-11-16  Hugo Tyson  <[e-mail]>

	* src/mem285.S: Rewrite, essentially: it was the only way to get a
	good enough handle on what this nasty, trick stuff does.  I'm very
	happy with it now.  It's also callable for RAM startup too, to
	happily count up the RAMs as initialized: no guessing ever again!

	* include/hal_platform_setup.h: Delete some code!  Now that mem285
	initialization is sorted out, it's cool to do exactly the same
	thing for ROM and RAM startup; the mem init code differs, mind, to
	just add up the memory sizes in RAM start.

1999-11-10  Hugo Tyson  <[e-mail]>

	* include/hal_platform_setup.h (PLATFORM_FLUSH_DISABLE_CACHES):
	Also flush TLBs - this is vital when changing cachability &c
	during startup.  Also do that same flush in ROM start, for when we
	build to run in flash block #1 following POST executing, when
	"stuff" might be in an odd state.

1999-11-09  Gary Thomas  <[e-mail]>

	* include/pkgconf/mlt_arm_ebsa285_ram.h: 
	* include/pkgconf/mlt_arm_ebsa285_rom.h: New files.

	* include/pkgconf/mlt_arm_ebsa285_ram.ldi: 
	* include/pkgconf/mlt_arm_ebsa285_ram.mlt: 
	* include/pkgconf/mlt_arm_ebsa285_rom.ldi: 
	* include/pkgconf/mlt_arm_ebsa285_rom.mlt: Update with correct memory layout.

	* src/hal_diag.c: Honor GDB_DISABLE option.

1999-11-09  Jesper Skov  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl: 
	* include/pkgconf/hal_arm_ebsa285.h:
	* src/ebsa285_misc.c: 
	Remap PCI accessible memory as non-cachable. Changed default
	PCI mapped memory to the top 1MB of a 16MB system.

1999-11-01  Jesper Skov  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl: Remove define_proc comments.

1999-10-29  Jesper Skov  <[e-mail]>

	* include/pkgconf/mlt_arm_ebsa285_ram.ldi: 
	* include/pkgconf/mlt_arm_ebsa285_rom.ldi: 
	* include/pkgconf/mlt_arm_ebsa285_ram.mlt: 
	* include/pkgconf/mlt_arm_ebsa285_rom.mlt: 
	Increased memory size to 16MB.
	
1999-10-27  Jesper Skov  <[e-mail]>

	* src/hal_diag.c: Fixed conditional include.

1999-10-26  Hugo Tyson  <[e-mail]>

	* src/hal_diag.c (hal_diag_write_char): Use new macro
	CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION and its mate to control
	stepping through gdb $O packet output.

1999-10-26  Jesper Skov  <[e-mail]>

	* include/hal_platform_setup.h (CYGHWR_LED_MACRO): Define.

1999-10-26  John Dallaway  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl:

	Rename CYGBLD_GLOBAL_PREFIX to
	CYGBLD_GLOBAL_COMMAND_PREFIX

1999-10-20  John Dallaway  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl:
	Define build-related and memory layout-related CDL options.

1999-10-11  Jesper Skov  <[e-mail]>
	* cdl/hal_arm_ebsa285.cdl: 
	* include/plf_io.h:
	* include/pkgconf/hal_arm_ebsa285.h: 
	Added configurability of EBSA memory accessible from PCI space.

	* src/ebsa285_misc.c (hal_bsp_mmu_init): Folded XBus into 21285 regs.
	* include/hal_platform_setup.h (PLATFORM_SETUP1): Disable cache first.

1999-10-06  John Dallaway  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl:
	Define CYGTST_TESTING_IDENTIFIER.

1999-10-05  Hugo Tyson  <[e-mail]>

	* support/linux/safl_util/sa_flash.c: Add a lot of extra
	diagnostics and some new options; did this in the course of
	finding out whether a board really was dead or not, so may as well
	commit it.

1999-09-24  Jesper Skov  <[e-mail]>

	* include/plf_io.h (HAL_PCI_INIT): Fix rookie code bug.

	* include/hal_ebsa285.h (SA110_XBUS_XCS2): Fix typo.

1999-09-01  Hugo Tyson  <[e-mail]>

	* include/hal_ebsa285.h (ARM_MMU_SECTION): Move these macros and
	memory-layout structure definitions here from ebsa285_misc.c so
	that others can use them.

	* src/ebsa285_misc.c (hal_IRQ_handler): Scan FIQ sources also and
	print a warning if any are active.
	(hal_hardware_init): Clear the FIQ enable mask at startup too;
	this was assumed to be cleared at reset, but just in case...
	(ARM_MMU_SECTION): Move these macros and memory-layout structure
	definitions from here to include/hal_ebsa285.h so that others can
	use them.
	
	* src/hal_diag.c (hal_diag_write_char): Do not unconditionally
	poke the XBUS LED location - XBUS may not be available if internal
	21285 arbiter is in use.
	(hal_diag_write_char): Fix warnings for proto of
	cyg_hal_gdb_interrupt().
	
1999-09-01  Jesper Skov  <[e-mail]>

	* include/plf_io.h (HAL_PCI_CONFIG_ADDRESS): Use alternate config
	space 0 addressing so all 32 devices can be scanned.

1999-08-27  Jesper Skov  <[e-mail]>

	* include/hal_ebsa285.h: Added some timer bits.

1999-08-24  Jesper Skov  <[e-mail]>

	* include/hal_ebsa285.h (SA110_XBUS_CYCLE_ARBITER_ENABLED): Added.

	* include/hal_platform_setup.h (INIT_XBUS_ACCESS): Check jumper
	settings and behave accordingly.

	* include/plf_io.h (HAL_PCI_TRANSLATE_INTERRUPT): Fixed interrupt
	vector table to match observed behavior.

1999-08-19  Jesper Skov  <[e-mail]>
        PR 20326
	* include/hal_cache.h: Set MMU/align flag as well.

1999-08-19  Jesper Skov  <[e-mail]>

	* include/hal_platform_setup.h (BASIC_PCI_SETUP): [+untabified]
	* include/plf_io.h (HAL_PCI_INIT): 
	Changed PCI enable comment to match actual behavior.

1999-08-17  Jesper Skov  <[e-mail]>

	* include/plf_io.h: Rename HAL_PCI_CONFIG_INTERRUPT to
	HAL_PCI_TRANSLATE_INTERRUPT.
	Read _PIN instead of _LINE.

1999-08-16  Jesper Skov  <[e-mail]>

	* include/plf_io.h (HAL_PCI_CONFIG_INTERRUPT): Added.

1999-08-13  Jesper Skov  <[e-mail]>

	* include/plf_io.h: Renamed macros and added resource information.
	Renaming again.
	
1999-08-12  John Dallaway  <[e-mail]>

	* cdl/hal_arm_ebsa285.cdl:
	Define CYG_HAL_STARTUP and CYGHWR_MEMORY_LAYOUT.

1999-08-12  Jesper Skov  <[e-mail]>

	* include/plf_io.h: Added PCI macros.

1999-08-12  Jesper Skov  <[e-mail]>

	* cdl: Added CDL for ebsa.

1999-08-12  Jesper Skov  <[e-mail]>

	* include/hal_platform_setup.h: 
	* include/hal_ebsa285.h: 
	Renamed some PCI registers and moved out generic PCI stuff.

1999-08-10  Jesper Skov  <[e-mail]>

	* include/hal_ebsa285.h: Added more definitions.

	* include/plf_stub.h (HAL_STUB_PLATFORM_RESET): Defined.

1999-08-04  Jesper Skov  <[e-mail]>

	* src/ebsa285_misc.c (ARM_ACCESS_TYPE_x): each domain has two bits.

1999-07-26  John Dallaway  <[e-mail]>

	* include/pkgconf/mlt_arm_ebsa285_rom.mlt: 
	* include/pkgconf/mlt_arm_ebsa285_ram.mlt: 

	Fix memory section alignments to match those of the pre-built
	linker script fragments.

1999-07-26  Hugo Tyson  <[e-mail]>

	* include/pkgconf/mlt_arm_ebsa285_rom.mlt: 
	* include/pkgconf/mlt_arm_ebsa285_ram.mlt: 
	Make these match the .ldi files that do the linking proper, so
	that the process is reversible and the .ldi files recreatable.

1999-07-26  Hugo Tyson  <[e-mail]>

	* include/hal_platform_ints.h (CYGDBG_HAL_CTRLC_ISR): Define this
	if needed so that the arch HAL can conditionally call our poll
	routine.  Problem is that CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT *is*
	defined for platforms that do not support it.

1999-07-23  Hugo Tyson  <[e-mail]>

	* src/hal_diag.c (hal_ctrlc_isr): Define this function, which is
	called from the default ISR, if CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
	is defined.  It looks for a ^C in the serial input and bangs out
	with a breakpoint if one arrives.  Note that you cannot do much at
	all after this bp, except examine the stack and see where the
	program had got to.
	(hal_diag_write_char): Do not eat response characters from GDB:
	leave them for the ISR mentioned above to test for ^C.

	* src/ebsa285_misc.c (hal_hardware_init): Unmask the interrupt for
	serial reception, so that we can scan for incoming ^C, if the
	option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT is defined.

1999-07-23  Hugo Tyson  <[e-mail]>

	* include/hal_platform_ints.h (CYG_GDB_DEV_INT, CYG_DIAG_DEV_INT):
	define these so that interrupting using ^C and so on will work.

1999-07-22  Hugo Tyson  <[e-mail]>

	* support/README: New file.
	* support/linux/README: New file.
	* support/linux/safl_util/README: New file.
	* support/linux/safl_util/Makefile: New file.
	* support/linux/safl_util/sa_flash.c: New file.
	* support/linux/safl_util/safl.c: New file.
	Keep the devo safl_utils for programming ebsa-285 FLASH in the
	eCos tree too, so that it gets into our releases.

1999-07-21  Hugo Tyson  <[e-mail]>

	* include/hal_platform_setup.h (PLATFORM_SETUP1): Get ROM startup
	to work OK; tidy up RAM start in consequence.  Do not set
	CYGHWR_HAL_ARM_HAS_MMU so that we jump straight into high ROM.
	Remove consequently unused macros.

	* src/ebsa285_misc.c: Pass DRAM size as detected at startup around
	correctly; worry less about alignment of MMU page table thingy.

	* src/hal_diag.c: Make ROM startup systems output in clear.

	* src/mem285.S: Get rid of all that IMM() nonsense.

	* misc/stubrom.perm: NEW FILE: Add instructions for making a STUBROM.

	* include/pkgconf/mlt_arm_ebsa285_rom.ldi: Get the numbers right
	for ROM startup.

1999-07-19  Hugo Tyson  <[e-mail]>

	* src/mem285.S: New file: offers routine __mem285_init, for DRAM
	sizing before the MMU is set up.  Code borrowed from CygMon/BSP of
	course.

	* src/ebsa285_misc.c: Add the meat of the 'C' initialization here;
	MMU initialization is the main addition.  Code borrowed from
	CygMon/BSP.

	* src/PKGconf.mak (COMPILE): Add mem285.S, which contains tricky
	DRAM sizing and init code - which of course can only be run from
	ROM, since it is damaging to the contents of DRAM.

	* include/hal_platform_setup.h (PLATFORM_SETUP1): Add required
	startup code in various macros to make constructing one phrase for
	ROM vs RAM startup easier, and for debug.  Code borrowed from
	CygMon/BSP.

	* src/hal_diag.c (hal_diag_init): Initialize the hardware, by
	setting the baud rate.

	* include/hal_ebsa285.h (ARM_FIRST_LEVEL_PAGE_TABLE_SIZE): Add
	this and a few other symbols for the DRAM sizing and MMU init
	code.

1999-07-16  Hugo Tyson  <[e-mail]>

	* include/pkgconf/hal_arm_ebsa285.h: Typo in tidy up of config
	info.  Doh!

1999-07-16  Hugo Tyson  <[e-mail]>

	* include/pkgconf/hal_arm_ebsa285.h: Tidy up config info.

1999-07-15  Hugo Tyson  <[e-mail]>

	* src/ebsa285_misc.c (hal_hardware_init): Enable the caches in
	here; they are now disabled during startup.

	* include/hal_platform_setup.h (PLATFORM_SETUP1): Added code to
	disable caches [if RAM start] and switch to the ROM address
	[regardless, since it's the RAM addr if RAM start so harmless]

	* include/pkgconf/mlt_arm_ebsa285_rom.ldi: Set up some of the
	values here while they are in my head; see above.

1999-07-15  Hugo Tyson  <[e-mail]>

	* include/hal_cache.h: Tidy up cache macros and make semantics
	better match what the GDB stubs require.

1999-07-15  Hugo Tyson  <[e-mail]>

	* include/sa-110.h: removed, it was added in error.  Its contents
	live in include/hal_ebsa285.h

1999-07-14  Hugo Tyson  <[e-mail]>

	New component: StrongARM EBSA-285 development board support.
	New files:
	* include/hal_cache.h
	* include/hal_diag.h
	* include/hal_ebsa285.h
	* include/hal_platform_ints.h
	* include/hal_platform_setup.h
	* include/plf_stub.h
	* include/sa-110.h
	* include/pkgconf/hal_arm_ebsa285.h
	* include/pkgconf/mlt_arm_ebsa285_ram.ldi
	* include/pkgconf/mlt_arm_ebsa285_ram.mlt
	* include/pkgconf/mlt_arm_ebsa285_rom.ldi
	* include/pkgconf/mlt_arm_ebsa285_rom.mlt
	* src/PKGconf.mak
	* src/ebsa285_misc.c
	* src/hal_diag.c
	* src/plf_stub.c

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================