changelog

来自「eCos操作系统源码」· 代码 · 共 313 行

TXT
313
字号
2004-04-22  Jani Monoses <jani@iv.ro>	 * cdl/hal_mips_vr4300.cdl :	 Invoke tail with stricter syntax that works in latest coreutils. 2003-04-10  Nick Garnett  <nickg@balti.calivar.com>	* src/mips_vr4300.ld: 	Added libsupc++.a to GROUP() directive for GCC versions later than	3.0.2001-12-05  Nick Garnett  <nickg@redhat.com>	* include/variant.inc: Add ifdef around cache clearing code to	only do this in non-RAM-startup configurations. If this is done in	a RAM-startup configuration, it can play merry havoc with the	state of things like RedBoot's network stack.	We now assume, for RAM applications, that our loader has	initialized the cache.2001-10-12  Nick Garnett  <nickg@redhat.com>	* src/mips_vr4300.ld (SECTION_rom_vectors): Updated this section	to make ROM startup work.	Note: this still does not fix all ROM startup problems, since the	ROM is still too slow to execute code from at anything like a	relistic speed.2001-10-01  Jonathan Larmour  <jlarmour@redhat.com>	* cdl/hal_mips_vr4300.cdl: Define endianness in platform CDL instead.2001-09-10  Nick Garnett  <nickg@redhat.com>	* src/mips_vr4300.ld: Added .2ram sections to data section needed	for FLASH support.2001-09-07  Nick Garnett  <nickg@redhat.com>	* include/variant.inc: Added definition of INITIAL_SR_VAR.	* include/var_arch.h (CYG_HAL_GDB_REG): Returned GDB registers to	full 64bit width.	* cdl/hal_mips_vr4300.cdl: Added endianness configuration.	Currently the VRC4373 platform is big endian for historical	reasons, while the VRC4375 platform is little endian.	2000-09-01  Jonathan Larmour  <jlarmour@redhat.com>	* include/var_arch.h (CYG_HAL_GDB_REG): vr4300 GDB stubs now use 	32-bits internally to represent registers2000-06-21  Nick Garnett  <nickg@cygnus.co.uk>	* src/mips_vr4300.ld:	Switched to new table definition mechanism.2000-02-23  Jonathan Larmour  <jlarmour@redhat.co.uk>	* include/var_cache.h: Don't need to conditionalize on vr43002000-02-16  Jesper Skov  <jskov@redhat.com>	* cdl/hal_mips_vr4300.cdl: removed fix me2000-01-28  Gary Thomas  <gthomas@cygnus.co.uk>	* src/mips_vr4300.ld: Add support for network package.2000-01-14  Nick Garnett  <nickg@cygnus.co.uk>	* include/pkgconf/hal_mips_vr4300.h:	Added define for CYGHWR_HAL_MIPS_64BIT so that all vr4300 targets	save and restore 64 bit register values.	* cdl/hal_mips_vr4300.cdl:	Added option for CYGHWR_HAL_MIPS_64BIT so that all vr4300 targets	save and restore 64 bit register values.1999-12-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* cdl/hal_mips_vr4300.cdl: Some cosmetic layout changes and fixed typos	Ensure we "puts" to correct CDL header1999-12-02  John Dallaway  <jld@cygnus.co.uk>	* cdl/hal_mips_vr4300.cdl:	Use the <PACKAGE> token in custom rules.1999-12-01  John Dallaway  <jld@cygnus.co.uk>	* cdl/hal_mips_vr4300.cdl:	Use the <PREFIX> token in custom rules.1999-11-04  John Dallaway  <jld@cygnus.co.uk>	* cdl/hal_mips_vr4300.cdl:	Output custom rule dependency information to .deps files in	the current directory.	Dispense with the need to create a 'src' sub-directory.1999-11-02  Jesper Skov  <jskov@cygnus.co.uk>	* cdl/hal_mips_vr4300.cdl: Added.1999-10-25  Nick Garnett  <nickg@cygnus.co.uk>	* include/var_cache.h: The single nop added on 10-21 seems to	cause exceptions on the vrc4373 board but not on others. Extended	this to three nops, which seem to work on all boards.1999-10-22  Nick Garnett  <nickg@cygnus.co.uk>	* include/var_intr.h: Removed superfluous placeholder ifdef.1999-10-21  Nick Garnett  <nickg@cygnus.co.uk>	* include/var_cache.h: Added an extra nop after reading the	config0 register. In some boards we get an exception when reloading	it if we don't have this here. Something to do with coprocessor	hazards.1999-10-06  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* src/PKGconf.mak: Don't create extras.o here any more1999-10-05  Nick Garnett  <nickg@cygnus.co.uk>	* src/PKGconf.mak: Switched link command for libextras over to big	endian.	* include/pkgconf/hal_mips_vr4300.h: Added definition of	CYGPKG_HAL_MIPS_MSBFIRST.	* include/variant.inc: Set BE bit in config0 register depending on	definitions of CYGPKG_HAL_MIPS_[L|M]SBFIRST.1999-09-09  Nick Garnett  <nickg@cygnus.co.uk>	* src/mips_vr4300.ld:	Extended size of .rom_vectors section to 0x800 bytes for ROMRAM	startup so that when it is copied down into RAM, the VSR and	vector tables are zeroed automatically.	* include/variant.inc:	Moved cache macros here so that code to initialize the caches is	variant specific.1999-09-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* src/mips_vr4300.ld: Discard debug vector - it doesn't exist on the	vr43001999-08-05  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* include/variant.inc: VR4300 is a mips 3 processor, so always allow	mips3 instructions1999-07-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* include/variant.inc: Rename CYG_HAL_MIPS_FSR_INIT to	CYG_HAL_MIPS_FCSR_INIT since that's closer to its documented name1999-07-09  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* include/var_cache.h: Define HAL_ICACHE_IS_ENABLED() to be the same	as HAL_DCACHE_IS_ENABLED()1999-06-25  Nick Garnett  <nickg@cygnus.co.uk>	* include/variant.inc:	Added initializer for FPU FSR register.1999-06-17  Nick Garnett  <nickg@cygnus.co.uk>	* include/var_cache.h: Added defines to disable generic code for	cache lock support in hal_cache.h. The vr4300 does not have cache	locking.1999-06-17  Jesper Skov  <jskov@cygnus.co.uk>	* src/mips_vr4300.ld: Removed below workaround.1999-06-16  Jesper Skov  <jskov@cygnus.co.uk>        CR 100804 workaround	* src/mips_vr4300.ld:  Suppress .mdebug in the final output.1999-05-28  Nick Garnett  <nickg@cygnus.co.uk>	* src/mips_vr4300.ld:	Removed references to CYG_HAL_STARTUP_STUBS1999-05-27  Nick Garnett  <nickg@cygnus.co.uk>	* include/var_cache.h (HAL_DCACHE_IS_ENABLED): Added an	implementation of this macro.1999-05-21  Nick Garnett  <nickg@cygnus.co.uk>	* src/var_misc.c (hal_variant_init): Added enables for caches.	* src/mips_vr4300.ld: Added definition of SECTION_rom_vectors()	for ROMRAM and STUBS startups.	* include/variant.inc: Added an initial value for config0.	* include/var_cache.h: Added enable and disable macros for data	and instruction caches.1999-05-13  Nick Garnett  <nickg@cygnus.co.uk>	Imported whole directory tree into main trunk of repository.1999-05-11  Nick Garnett  <nickg@cygnus.co.uk>	[VR4300 branch]		* include/imp_arch.h: 	* include/imp_intr.h: 	* include/imp_cache.h:	* include/impl.inc:	* src/imp_misc.c:	* include/var_arch.h: 	* include/var_intr.h: 	* include/var_cache.h:	* include/variant.inc:	* src/var_misc.c:	* src/PKGconf.mak:	"Imp" and "Impl" files renamed to "var" and "variant" equivalents.	* include/pkgconf/hal_vr4300.h	* include/pkgconf/hal_mips_vr4300.h	Config file hal_vr4300.h renamed to hal_mips_vr4300.h so that it	matches the name synthesized by pkgconf.tcl.	* src/mips_vr4300.ld:	Moved VSR table and vector table to 0x800XXXXX.	1999-05-11  Gary Thomas  <gthomas@cygnus.co.uk>	[VR4300 branch]		* src/mips_vr4300.ld: Change CTOR sort order - fixes problems	with uItron initialization.1999-04-29  Nick Garnett  <nickg@cygnus.co.uk>	[VR4300 branch]	* src/mips_vr4300.ld: Added definitions of hal_vsr_table and	hal_virtual_vector_table. These are currently at 0x806XXXXX but	will be moved to 0x800XXXXX when we can make proper ROMs.1999-04-27  John Dallaway  <jld@cygnus.co.uk>	[VR4300 branch]	* src/PKGconf.mak: Force generation of little-endian extras.o1999-04-23  Nick Garnett  <nickg@cygnus.co.uk>	[VR4300 branch]	* include/pkgconf/hal_vr4300.h: Added some CPU characterization	definitions for the benefit of the generic mips HAL.	* include/imp_arch.h: Added this file. It contains configuration	and redefinitions for stuff in hal_arch.h.1999-04-21  Nick Garnett  <nickg@cygnus.co.uk>	[VR4300 branch]	* src/imp_misc.c: Added this file to contain	hal_implementation_init().		* src/PKGconf.mak (COMPILE): Added imp_misc.c.//===========================================================================//####ECOSGPLCOPYRIGHTBEGIN####// -------------------------------------------// This file is part of eCos, the Embedded Configurable Operating System.// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.//// eCos is free software; you can redistribute it and/or modify it under// the terms of the GNU General Public License as published by the Free// Software Foundation; either version 2 or (at your option) any later version.//// eCos is distributed in the hope that it will be useful, but WITHOUT ANY// WARRANTY; without even the implied warranty of MERCHANTABILITY or// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License// for more details.//// You should have received a copy of the GNU General Public License along// with eCos; if not, write to the Free Software Foundation, Inc.,// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.//// As a special exception, if other files instantiate templates or use macros// or inline functions from this file, or you compile this file and link it// with other works to produce a work based on this file, this file does not// by itself cause the resulting work to be covered by the GNU General Public// License. However the source code for this file must still be made available// in accordance with section (3) of the GNU General Public License.//// This exception does not invalidate any other reasons why a work based on// this file might be covered by the GNU General Public License.//// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.// at http://sources.redhat.com/ecos/ecos-license/// -------------------------------------------//####ECOSGPLCOPYRIGHTEND####//===========================================================================

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?