changelog

来自「eCos操作系统源码」· 代码 · 共 225 行

2003-02-24  Jonathan Larmour  <[e-mail]>

	* cdl/ser_arm_pid.cdl: Remove irrelevant doc link.

2001-09-10  Jonathan Larmour  <[e-mail]>

        * cdl/ser_arm_pid.cdl:        
        Fix 234000->230400 typo.

2000-09-18  Jesper Skov  <[e-mail]>

	* src/pid_serial.h: [removed]
	* src/pid_serial_with_ints.c: [removed] Moved driver to generic
	16x5x package.
	* include/arm_arm7_pid_ser.inl: [added] Make use of generic
	driver.
	* cdl/ser_arm_pid.cdl: Matching changes.

	* ChangeLog: Cleaned out non-pid entries.

2000-08-24  Jonathan Larmour  <[e-mail]>

	* src/pid_serial_with_ints.c (pid_serial_DSR): Remove accidental
	OVERRUNERR check duplication

2000-08-01  Jonathan Larmour  <[e-mail]>

	* src/pid_serial_with_ints.c: Throughout, add support for line status
	and modem status callbacks, hardware RTS/CTS and DSR/DTR flow control
	(pid_serial_set_config): Now use keys to make
	more flexible.

	* src/pid_serial.h: Add more line status, interrupt status and modem
	status register definitions

	* cdl/ser_arm_pid.cdl: Implements flow control and line status
	interfaces

2000-06-22  Hugo Tyson  <[e-mail]>

	* cdl/<yournamehere>.cdl: Remove the comment on the empty
	include_files directive; the tools now support this correctly.
	This keeps internal include files internal.

2000-06-09  Jesper Skov  <[e-mail]>

	* src/pid_serial_with_ints.c: 
	* src/pid_serial.h: 
	Cleaned up defines and made DSR handle all received characters.
	(Dave Airlie (airlied at parthus dot com))

2000-04-11  Hugo Tyson  <[e-mail]>

	* cdl/ser_arm_pid.cdl: Change the parent from CYGPKG_IO_SERIAL
	(which is enabled most of the time) to CYGPKG_IO_SERIAL_DEVICES
	(which is not...) thus allowing convenient control independent of
	platform.  Also enable all individual devices by default, now, so
	that they can be enabled simply by enabling the above new parent.

2000-04-07  Hugo Tyson  <[e-mail]>

	* ecos.db: Re-organize device packages.  This is a massive change
	involving deleting all the sources for serial and ethernet drivers
	from where they used to live in
	    packages/io/serial/current/src/ARCH/PLATFORM.[ch]
	    packages/net/drivers/eth/PLATFORM/current/src/...
	and reinstating them in
	    packages/devs/serial/ARCH/PLATFORM/current/src/...
	    packages/devs/eth/ARCH/PLATFORM/current/src/...

	All these new packages are properly defined in ecos.db, and are
	all of type "hardware" so that a "target" can grab them.
	
	This directory layout is descriptive of the devices we have right
	now, arch and platform are separate levels just to make it easier
	to navigate in the filesystem and similar to the HAL structure in
	the filesystem.

	It is *not* prescriptive of future work; for example, the mythical
	common highly-portable 16550 serial driver which works on many
	targets would be called "devs/serial/s16550/current", or a serial
	device for a particular board (cogent springs to mind) that can
	work with different CPUs fitted is "devs/serial/cogent/current".

	Changelogs have been preserved and replicated over all the new
	packages, so that no history is lost.

	The contents of individual source files are unchanged; they build
	in just the same emvironment except for a very few cases where the
	config file name changed in this movement.

	Targets in ecos.db have been redefined to bring in all relevant
	hardware packages including net and serial drivers (but the newly
	included packages are only active if their desired parent is
	available.)
	
	The names of CDL options (and their #defines of course) stay the
	same for the serial drivers, for backward compatibility.

	* templates/*/current.ect: these have had CYGPKG_IO_SERIAL added
	rather than it being in (almost) all target definitions.
	
2000-01-03  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Fix namespace pollution -
	serial_devio => cyg_io_serial_devio

1999-12-06  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c (pid_serial_DSR): Add loop to handle
	case where an interrupt represents multiple events.

1999-10-26  Jesper Skov  <[e-mail]>

	* src/arm/pid_serial.h: Added BE support.

1999-10-25  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial.h (ISR_RxTO): Define - character received but
	not handled "promptly".

	* src/arm/pid_serial_with_ints.c (pid_serial_DSR): Handle rcv
	interrupts properly (can't ignore them even with TO bit set).

1999-06-20  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Use #include to get 'diag_printf()'
	prototypes.

1999-05-14  Jesper Skov  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: 
	* src/arm/pid_serial.h: 
	Check for receive interrupt before reading.

1999-04-20  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Fix default baud rate if unbuffered.

1999-03-25  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: 
	Update CDL to follow naming conventions.

	* src/arm/pid_serial_with_ints.c (pid_serial_config_port): Change
	so that the physical port is not modified unless the provided
	configuration is valid.

	* src/arm/pid_serial_with_ints.c: 
	Add configury for baud rate and buffer size.

1999-03-24  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c (pid_serial_stop_xmit): Fix typo
	in comment.

1999-03-22  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Use CDL configured device names.

1999-03-19  Jesper Skov  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: 
	Moved include statement to avoid warnings.

1999-03-18  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: 
	Update device names to match CDL.

1999-03-17  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Conditionalize based on CDL.

1999-03-15  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Add 'CYGDBG_IO_INIT' for control
	of init messages.

	* src/arm/pid_serial_with_ints.c: Don't include <cyg/kernel/kapi.h>

1999-03-05  Gary Thomas  <[e-mail]>

	* src/arm/pid_serial_with_ints.c: Fix interrupt vectors.

1999-03-03  Gary Thomas  <[e-mail]>

	* serial/current/src/arm/pid_serial_with_ints.c: 
	New [somewhat] configurable drivers for PID.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================