h8300_edosk2674_eth_drivers.cdl

eCos操作系统源码

# ====================================================================
#
#      edosk2674_eth_drivers.cdl
#
#      Ethernet drivers - support for LAN91CXX ethernet controller
#      on the EDOSK-2674 board.
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      yoshinori sato
# Contributors:   yoshinori sato
# Date:           2003-02-26
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_DEVS_ETH_H8300_EDOSK2674 {

    display       "EDOSK-2674 SMC91C96 ethernet driver"

    parent        CYGPKG_IO_ETH_DRIVERS
    active_if	  CYGPKG_IO_ETH_DRIVERS
    active_if	  CYGPKG_HAL_H8300_H8S_EDOSK2674

    implements    CYGHWR_NET_DRIVERS
    implements    CYGHWR_NET_DRIVER_ETH0
    implements    CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED
    implements    CYGSEM_DEVS_ETH_SMSC_LAN91CXX_8_BIT

    description   "Ethernet driver for EDOSK-2674 boards."

    include_dir   cyg/io

    define_proc {
        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_INL <cyg/io/devs_eth_edosk2674.inl>"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_CFG <pkgconf/devs_eth_h8300_edosk2674.h>"
        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"
    }
    
    # Arguably this should do in the generic package
    # but then there is a logic loop so you can never enable it.

    cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED {
        display   "SMSC LAN91CXX driver required"
    }

    cdl_option CYGDAT_DEVS_ETH_H8300_EDOSK2674_NAME {
        display       "Device name for the ethernet driver"
        flavor        data
        default_value {"\"eth0\""}
        description   "
            This option sets the name of the ethernet device for the
            ethernet port."
    }

    cdl_option CYGDAT_DEVS_ETH_H8300_EDOSK2674_ESA {
        display       "The ethernet station address (MAC)"
        flavor        data
        default_value {"{0x12, 0x13, 0x14, 0x15, 0x16, 0x17}"}
        description   "A static ethernet station address. 
            Caution: Booting two systems with the same MAC on the same
            network, will cause severe conflicts."
        active_if     !CYGSEM_DEVS_ETH_ARM_FLEXANET_REDBOOT_ESA
    }

    cdl_option CYGSEM_DEVS_ETH_H8300_EDOSK2674_ETH0_SET_ESA {
        display "Use the RedBoot ESA (MAC address)"
        default_value 0
        flavor        bool
        description   "
            Use the ESA that is stored as a RedBoot variable instead of
            a static ESA." 
    }

}

# EOF flexanet_eth_drivers.cdl