csb281_eth_drivers.cdl

来自「eCos操作系统源码」· CDL 代码 · 共 202 行

# ====================================================================
#
#      csb281_eth_drivers.cdl
#
#      Ethernet drivers - support for i82559 ethernet controller
#      on the Cogent CSB281 (PowerPC 8245) board.
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
## Copyright (C) 2002 Gary Thomas
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Contributors:   jskov, hmt, gthomas
# Date:           2001-02-28
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_DEVS_ETH_CSB281 {
    display       "Cogent CSB281 ethernet driver"
    description   "
	Ethernet driver for Cogent CSB281 with Intel
	i82559 Ethernet controllers attached via the PCI"

    parent        CYGPKG_IO_ETH_DRIVERS
    active_if	  CYGPKG_IO_ETH_DRIVERS
    active_if     CYGPKG_HAL_POWERPC_CSB281

    include_dir   cyg/io

    # FIXME: This really belongs in the INTEL_I82559 package
    cdl_interface CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
        display   "Intel i82559 ethernet driver required"
    }

    define_proc {
        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_INL <cyg/io/devs_eth_csb281.inl>"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_CFG <pkgconf/devs_eth_csb281.h>"
        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"
    }

    cdl_component CYGPKG_DEVS_ETH_CSB281_ETH0 {
        display       "CSB281 ethernet port 0 driver"
        flavor        bool
        default_value 1
        description   "
            This option includes the ethernet device driver on the 
            csb281 motherboard."

        implements CYGHWR_NET_DRIVERS
        implements CYGHWR_NET_DRIVER_ETH0
        implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED

        cdl_option CYGDAT_DEVS_ETH_CSB281_ETH0_NAME {
            display       "Device name for the ethernet port 0 driver"
            flavor        data
            default_value {"\"eth0\""}
            description   "
                This option sets the name of the ethernet device for the
                ethernet port 0."
        }

        cdl_component CYGSEM_DEVS_ETH_CSB281_ETH0_SET_ESA {
            display       "Set the ethernet station address"
            flavor        bool
	    default_value !CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA
            description   "Enabling this option will allow the ethernet
            station address to be forced to the value set by the
            configuration.  This may be required if the hardware does
            not include a serial EEPROM for the ESA, and if RedBoot's
	    flash configuration support is not available."
            
            cdl_option CYGDAT_DEVS_ETH_CSB281_ETH0_ESA {
                display       "The ethernet station address"
                flavor        data
                default_value {"{0x00, 0xB5, 0xE0, 0xB5, 0xE0, 0x11}"}
                description   "The ethernet station address"
            }
        }
    }

    cdl_component CYGPKG_DEVS_ETH_CSB281_ETH1 {
        display       "CSB281 ethernet port 1 driver"
        flavor        bool
        default_value 0
        description   "
            This option includes the ethernet device driver for the
            additional i82559 devices plugged into a PCI slot."

        implements CYGHWR_NET_DRIVERS
        implements CYGHWR_NET_DRIVER_ETH1
        implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED

        cdl_option CYGDAT_DEVS_ETH_CSB281_ETH1_NAME {
            display       "Device name for the ethernet port 1 driver"
            flavor        data
            default_value {"\"eth1\""}
            description   "
                This option sets the name of the ethernet device for the
                ethernet port 1."
        }

        cdl_component CYGSEM_DEVS_ETH_CSB281_ETH1_SET_ESA {
            display       "Set the ethernet station address"
            flavor        bool
	    default_value !CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA
            description   "Enabling this option will allow the ethernet
            station address to be forced to the value set by the
            configuration.  This may be required if the hardware does
            not include a serial EEPROM for the ESA, and if RedBoot's
	    flash configuration support is not available."
            
            cdl_option CYGDAT_DEVS_ETH_CSB281_ETH1_ESA {
                display       "The ethernet station address"
                flavor        data
                default_value {"{0x00, 0xB5, 0xE0, 0xB5, 0xE0, 0x12}"}
                description   "The ethernet station address"
            }
        }
    }


    # note that this option's name is NOT csb281-specific, but i82559
    # generic - other instantiations can set these also.
    cdl_component CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA {
	display         "RedBoot manages ESA initialization data"
	flavor          bool
	default_value	1

	active_if     CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT

	description   "Enabling this option will allow the ethernet
	station address to be acquired from RedBoot's configuration data,
	stored in flash memory.  It can be overridden individually by the
	'Set the ethernet station address' option for each interface."

	cdl_component CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA_VARS {
	    display        "Build-in flash config fields for ESAs"
	    flavor         bool
	    default_value  1

	    active_if       CYGPKG_REDBOOT
	    active_if       CYGPKG_REDBOOT_FLASH
	    active_if       CYGSEM_REDBOOT_FLASH_CONFIG
	    active_if 	    CYGPKG_REDBOOT_NETWORKING

	    description	"
	    This option controls the presence of RedBoot flash
	    configuration fields for the ESAs of the interfaces when you
	    are building RedBoot.  It is independent of whether RedBoot
	    itself uses the network or any particular interface; this
	    support is more for the application to use than for RedBoot
	    itself, though the application gets at the data by vector
	    calls; this option cannot be enabled outside of building
	    RedBoot."
	
	    cdl_option CYGVAR_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA_ETH0 {
		display         "RedBoot manages ESA for eth0"
		flavor          bool
		default_value   1
	    }
	}
    }
}

# EOF csb281_eth_drivers.cdl