ftpclient1.c
来自「eCos操作系统源码」· C语言 代码 · 共 204 行
C
204 行
//==========================================================================//// tests/dns1.c//// Simple test of DNS client support////==========================================================================//####ECOSGPLCOPYRIGHTBEGIN####// -------------------------------------------// This file is part of eCos, the Embedded Configurable Operating System.// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.// Copyright (C) 2003 Andrew Lunn.//// eCos is free software; you can redistribute it and/or modify it under// the terms of the GNU General Public License as published by the Free// Software Foundation; either version 2 or (at your option) any later version.//// eCos is distributed in the hope that it will be useful, but WITHOUT ANY// WARRANTY; without even the implied warranty of MERCHANTABILITY or// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License// for more details.//// You should have received a copy of the GNU General Public License along// with eCos; if not, write to the Free Software Foundation, Inc.,// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.//// As a special exception, if other files instantiate templates or use macros// or inline functions from this file, or you compile this file and link it// with other works to produce a work based on this file, this file does not// by itself cause the resulting work to be covered by the GNU General Public// License. However the source code for this file must still be made available// in accordance with section (3) of the GNU General Public License.//// This exception does not invalidate any other reasons why a work based on// this file might be covered by the GNU General Public License.//// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.// at http://sources.redhat.com/ecos/ecos-license/// -------------------------------------------//####ECOSGPLCOPYRIGHTEND####//==========================================================================//#####DESCRIPTIONBEGIN####//// Author(s): andrew.lunn// Contributors: andrew.lunn, jskov// Date: 2001-09-18// Purpose: // Description: Test FTPClient functions. Note that the _XXX defines below// control what addresses the test uses. These must be// changed to match the particular testing network in which// the test is to be run.// //####DESCRIPTIONEND####////========================================================================== #include <network.h>#include <ftpclient.h>#include <cyg/infra/testcase.h> #define STACK_SIZE (CYGNUM_HAL_STACK_SIZE_TYPICAL + 0x1000)static char stack[STACK_SIZE];static cyg_thread thread_data;static cyg_handle_t thread_handle; #define __string(_x) #_x#define __xstring(_x) __string(_x) #define _FTP_SRV __xstring(172.16.19.254) // farmnet dns0 address#define _FTP_SRV_V6 __xstring(fec0:0:0:2::1)#define FTPBUFSIZE (1024 * 64)char ftpbuf[FTPBUFSIZE];char ftpbuf1[FTPBUFSIZE];voidftp_test(cyg_addrword_t p){ int ret; CYG_TEST_INIT(); init_all_network_interfaces(); CYG_TEST_INFO("Getting /etc/passwd from " _FTP_SRV); ret = ftp_get(_FTP_SRV,"anonymous","ftpclient1", "/etc/passwd",ftpbuf,FTPBUFSIZE, ftpclient_printf); if (ret > 0) { diag_printf("PASS:< %d bytes received>\n",ret); } else { diag_printf("FAIL:< ftp_get returned %d>\n",ret); } CYG_TEST_INFO("Putting passwd file back in /incoming/passwd\n"); ret = ftp_put(_FTP_SRV,"anonymous","ftpclient1", "/incoming/passwd",ftpbuf,ret, ftpclient_printf); if (ret > 0) { diag_printf("PASS:\n"); } else { diag_printf("FAIL:< ftp_get returned %d>\n",ret); } CYG_TEST_INFO("Reading back /incoming/passwd\n"); ret = ftp_get(_FTP_SRV,"anonymous","ftpclient1", "/incoming/passwd",ftpbuf1,FTPBUFSIZE, ftpclient_printf); if (ret > 0) { diag_printf("PASS:< %d bytes received>\n",ret); } else { diag_printf("FAIL:< ftp_get returned %d>\n",ret); } CYG_TEST_PASS_FAIL(!memcmp(ftpbuf,ftpbuf1,ret),"Transfer integrity");#ifdef CYGPKG_NET_INET6 CYG_TEST_INFO("Getting /etc/passwd from " _FTP_SRV_V6); ret = ftp_get(_FTP_SRV_V6,"anonymous","ftpclient1", "/etc/passwd",ftpbuf,FTPBUFSIZE, ftpclient_printf); if (ret > 0) { diag_printf("PASS:< %d bytes received>\n",ret); } else { diag_printf("FAIL:< ftp_get returned %d>\n",ret); } CYG_TEST_INFO("Putting passwd file back in /incoming/passwd\n"); ret = ftp_put(_FTP_SRV_V6,"anonymous","ftpclient1", "/incoming/passwd",ftpbuf,ret, ftpclient_printf); if (ret > 0) { diag_printf("PASS:\n"); } else { diag_printf("FAIL:< ftp_get returned %d>\n",ret); } CYG_TEST_INFO("Reading back /incoming/passwd\n"); ret = ftp_get(_FTP_SRV_V6,"anonymous","ftpclient1", "/incoming/passwd",ftpbuf1,FTPBUFSIZE, ftpclient_printf); if (ret > 0) { diag_printf("PASS:< %d bytes received>\n",ret); } else { diag_printf("FAIL:< ftp_get returned %d>\n",ret); } CYG_TEST_PASS_FAIL(!memcmp(ftpbuf,ftpbuf1,ret),"Transfer integrity");#endif CYG_TEST_INFO("ftp_Get'ing with a bad username\n"); ret = ftp_get(_FTP_SRV,"nosuchuser","ftpclient1", "/incoming/passwd",ftpbuf1,FTPBUFSIZE, ftpclient_printf); CYG_TEST_PASS_FAIL(ret==FTP_BADUSER,"Bad Username"); CYG_TEST_INFO("ftp_get'ting with a bad passwd\n"); ret = ftp_get(_FTP_SRV,"nobody","ftpclient1", "/incoming/passwd",ftpbuf1,FTPBUFSIZE, ftpclient_printf); CYG_TEST_PASS_FAIL(ret==FTP_BADUSER,"Bad passwd"); CYG_TEST_INFO("ftp_get'ing from a with a bad passwd\n"); ret = ftp_get(_FTP_SRV,"nobody","ftpclient1", "/incoming/passwd",ftpbuf1,FTPBUFSIZE, ftpclient_printf); CYG_TEST_PASS_FAIL(ret==FTP_BADUSER,"Bad passwd"); CYG_TEST_INFO("ftp_get'ing from a bad server\n"); ret = ftp_get("127.0.0.1","nobody","ftpclient1", "/incoming/passwd",ftpbuf1,FTPBUFSIZE, ftpclient_printf); CYG_TEST_PASS_FAIL(ret==FTP_NOSUCHHOST,"Bad server"); CYG_TEST_INFO("ftp_get'ing a file which is too big"); ret = ftp_get(_FTP_SRV,"anonymous","ftpclient1", "/incoming/passwd",ftpbuf,2, ftpclient_printf); CYG_TEST_PASS_FAIL(ret==FTP_TOOBIG,"File too big");}voidcyg_start(void){ /* Create a main thread, so we can run the scheduler and have time 'pass' */ cyg_thread_create(10, // Priority - just a number ftp_test, // entry 0, // entry parameter "FTP test", // Name &stack[0], // Stack STACK_SIZE, // Size &thread_handle, // Handle &thread_data // Thread data structure ); cyg_thread_resume(thread_handle); /* Start it */ cyg_scheduler_start();}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?