route6.c

来自「eCos操作系统源码」· C语言 代码 · 共 302 行

C
302
字号
//==========================================================================////      src/sys/netinet6/route6.c////==========================================================================//####BSDCOPYRIGHTBEGIN####//// -------------------------------------------//// Portions of this software may have been derived from OpenBSD, // FreeBSD or other sources, and are covered by the appropriate// copyright disclaimers included herein.//// Portions created by Red Hat are// Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.//// -------------------------------------------////####BSDCOPYRIGHTEND####//==========================================================================/*	$KAME: route6.c,v 1.28 2001/09/21 08:50:05 keiichi Exp $	*//* * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. Neither the name of the project nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */#include <sys/param.h>#include <sys/mbuf.h>#include <sys/socket.h>#include <sys/queue.h>#include <net/if.h>#ifdef NEW_STRUCT_ROUTE#include <net/route.h>#endif#include <netinet/in.h>#include <netinet6/in6_var.h>#include <netinet/ip6.h>#include <netinet6/ip6_var.h>#include <netinet/icmp6.h>#ifdef MIP6#include <netinet6/mip6.h>#endifstatic int ip6_rthdr0 __P((struct mbuf *, struct ip6_hdr *,    struct ip6_rthdr0 *));introute6_input(mp, offp, proto)	struct mbuf **mp;	int *offp, proto;	/* proto is unused */{	struct ip6_hdr *ip6;	struct mbuf *m = *mp;	struct ip6_rthdr *rh;	int off = *offp, rhlen;	struct mbuf *n;	n = ip6_findaux(m);	if (n) {		struct ip6aux *ip6a = mtod(n, struct ip6aux *);		/* XXX reject home-address option before rthdr */		if (ip6a->ip6a_flags & IP6A_SWAP) {			ip6stat.ip6s_badoptions++;			m_freem(m);			return IPPROTO_DONE;		}	}#ifndef PULLDOWN_TEST	IP6_EXTHDR_CHECK(m, off, sizeof(*rh), IPPROTO_DONE);	ip6 = mtod(m, struct ip6_hdr *);	rh = (struct ip6_rthdr *)((caddr_t)ip6 + off);#else	ip6 = mtod(m, struct ip6_hdr *);	IP6_EXTHDR_GET(rh, struct ip6_rthdr *, m, off, sizeof(*rh));	if (rh == NULL) {		ip6stat.ip6s_tooshort++;		return IPPROTO_DONE;	}#endif	switch (rh->ip6r_type) {	case IPV6_RTHDR_TYPE_0:		rhlen = (rh->ip6r_len + 1) << 3;#ifndef PULLDOWN_TEST		/*		 * note on option length:		 * due to IP6_EXTHDR_CHECK assumption, we cannot handle		 * very big routing header (max rhlen == 2048).		 */		IP6_EXTHDR_CHECK(m, off, rhlen, IPPROTO_DONE);#else		/*		 * note on option length:		 * maximum rhlen: 2048		 * max mbuf m_pulldown can handle: MCLBYTES == usually 2048		 * so, here we are assuming that m_pulldown can handle		 * rhlen == 2048 case.  this may not be a good thing to		 * assume - we may want to avoid pulling it up altogether.		 */		IP6_EXTHDR_GET(rh, struct ip6_rthdr *, m, off, rhlen);		if (rh == NULL) {			ip6stat.ip6s_tooshort++;			return IPPROTO_DONE;		}#endif		if (ip6_rthdr0(m, ip6, (struct ip6_rthdr0 *)rh))			return(IPPROTO_DONE);		break;	default:		/* unknown routing type */		if (rh->ip6r_segleft == 0) {			rhlen = (rh->ip6r_len + 1) << 3;			break;	/* Final dst. Just ignore the header. */		}		ip6stat.ip6s_badoptions++;		icmp6_error(m, ICMP6_PARAM_PROB, ICMP6_PARAMPROB_HEADER,			    (caddr_t)&rh->ip6r_type - (caddr_t)ip6);		return(IPPROTO_DONE);	}	*offp += rhlen;	return(rh->ip6r_nxt);}/* * Type0 routing header processing * * RFC2292 backward compatibility warning: no support for strict/loose bitmap, * as it was dropped between RFC1883 and RFC2460. */static intip6_rthdr0(m, ip6, rh0)	struct mbuf *m;	struct ip6_hdr *ip6;	struct ip6_rthdr0 *rh0;{	int addrs, index;	struct in6_addr *nextaddr, tmpaddr;	if (rh0->ip6r0_segleft == 0)#ifdef MIP6	{		struct hif_softc *sc;		struct mip6_bu *mbu;		int lastindex;		struct in6_addr *prevhop;		struct mbuf *n;		struct ip6aux *ip6a;		if (!MIP6_IS_MN)			return (0);		/*		 * check if the ip6_dst is my home address or not.  if		 * true, check if the previous hop is the coa of the		 * home address stored in the ip6_dst field.  if above		 * two is true, this packet is route optimized packet.		 */		for (sc = TAILQ_FIRST(&hif_softc_list);		     sc;		     sc = TAILQ_NEXT(sc, hif_entry)) {			for (mbu = LIST_FIRST(&sc->hif_bu_list);			     mbu;			     mbu = LIST_NEXT(mbu, mbu_entry)) {				if ((mbu->mbu_flags & IP6_BUF_HOME) == 0)					continue;				/* XXX registration status ? */				/* check the final dest is a home address. */				if (!IN6_ARE_ADDR_EQUAL(&ip6->ip6_dst,							&mbu->mbu_haddr))					continue;				/* check the last hop is a coa. */				lastindex = rh0->ip6r0_len / 2;				prevhop = (struct in6_addr *)(rh0 + 1)					+ lastindex - 1;				if (!IN6_ARE_ADDR_EQUAL(prevhop,							&mbu->mbu_coa))					continue;				/*				 * route is already optimized.  set				 * optimized flag in m_aux.				 */				n = ip6_addaux(m);				if (n) {					ip6a = mtod(n, struct ip6aux *);					ip6a->ip6a_flags = IP6A_ROUTEOPTIMIZED;				}			}		}		return (0);	}#else /* MIP6 */		return(0);#endif /* MIP6 */	if (rh0->ip6r0_len % 2#ifdef COMPAT_RFC1883	    || rh0->ip6r0_len > 46#endif		) {		/*		 * Type 0 routing header can't contain more than 23 addresses.		 * RFC 2462: this limitation was removed since strict/loose		 * bitmap field was deleted.		 */		ip6stat.ip6s_badoptions++;		icmp6_error(m, ICMP6_PARAM_PROB, ICMP6_PARAMPROB_HEADER,			    (caddr_t)&rh0->ip6r0_len - (caddr_t)ip6);		return(-1);	}	if ((addrs = rh0->ip6r0_len / 2) < rh0->ip6r0_segleft) {		ip6stat.ip6s_badoptions++;		icmp6_error(m, ICMP6_PARAM_PROB, ICMP6_PARAMPROB_HEADER,			    (caddr_t)&rh0->ip6r0_segleft - (caddr_t)ip6);		return(-1);	}	index = addrs - rh0->ip6r0_segleft;	rh0->ip6r0_segleft--;	nextaddr = ((struct in6_addr *)(rh0 + 1)) + index;	/*	 * reject invalid addresses.  be proactive about malicious use of	 * IPv4 mapped/compat address.	 * XXX need more checks?	 */	if (IN6_IS_ADDR_MULTICAST(nextaddr) ||	    IN6_IS_ADDR_UNSPECIFIED(nextaddr) ||	    IN6_IS_ADDR_V4MAPPED(nextaddr) ||	    IN6_IS_ADDR_V4COMPAT(nextaddr)) {		ip6stat.ip6s_badoptions++;		m_freem(m);		return(-1);	}	if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst) ||	    IN6_IS_ADDR_UNSPECIFIED(&ip6->ip6_dst) ||	    IN6_IS_ADDR_V4MAPPED(&ip6->ip6_dst) ||	    IN6_IS_ADDR_V4COMPAT(&ip6->ip6_dst)) {		ip6stat.ip6s_badoptions++;		m_freem(m);		return(-1);	}	/*	 * Swap the IPv6 destination address and nextaddr. Forward the packet.	 */	tmpaddr = *nextaddr;	*nextaddr = ip6->ip6_dst;	if (IN6_IS_ADDR_LINKLOCAL(nextaddr))		nextaddr->s6_addr16[1] = 0;	ip6->ip6_dst = tmpaddr;	if (IN6_IS_ADDR_LINKLOCAL(&ip6->ip6_dst))		ip6->ip6_dst.s6_addr16[1] = htons(m->m_pkthdr.rcvif->if_index);#ifdef COMPAT_RFC1883	if (rh0->ip6r0_slmap[index / 8] & (1 << (7 - (index % 8))))		ip6_forward(m, IPV6_SRCRT_NEIGHBOR);	else		ip6_forward(m, IPV6_SRCRT_NOTNEIGHBOR);#else	ip6_forward(m, 1);#endif	return(-1);			/* m would be freed in ip6_forward() */}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?